Plastic - universal Materialfrom which today is made appliances, kitchenware And other household items. But, under pressure from time and other factors white plastic begins to turn yellowing that spoils appearance Products. It is in such situations that the hostess is looking for an answer to the question, how to wash and whiten the yellowed plastic?

What to whiten the yellowed plastic?

The following means will help eliminate yellowness with plastic objects:

• ethanol;
• washing powder;
• chlorine-containing bleach;
• liquid remover with acetone;
• special cleaners in the form of sprays;
• soda calcined;
• pergel.

All listed funds are equally effective when dealing with yellowed plastic. Therefore, when cleaning can be repelled from what is already on hand or what will come out more economically for the family budget.

Whole plastic whitening methods

To return the whiteness to yellowed plastic, to choose a suitable tool, you need to use it correctly. There are several options that will help to shine whiteness even very old plastic.

We remove the yellowness to detergent and sponge

This option is appropriate to use if the yellowness succumbed to the facing of kitchen equipment, on which particles of fat and dust remain so often. To eliminate the problem as follows:

• Sponge soak in a soap solution or liquid detergent, squeeze.
• Soft movements wipe those places that wished.
• Rinse a sponge under ordinary water so that there are no traces of detergent on it, it is good to squeeze and re-rinse plastic.
• In the end there is a plastic surface to grasp the dry state with a conventional textile cloth.

For a soap solution, you can use the household soap. Its composition has an alkali that plastic is not afraid, and which perfectly eliminates signs of yellow.

Ethanol against yellowness

Before using ethanol against yellowness, you need to wear rubber gloves on your hands, on the face with a respiratory mask, and on the eyes protective glasses. It is also desirable to put the room for venting. This is done in order to prevent poisoning of ethanol with pairs.

Next, check the reaction of the object from plastic on alcohol. For this you need to wipe the substance area that is the least noticeable. If nic negative consequences No, it means that ethanol can be safely applied to the following way: apply ethanol on the cotton disk and rub the yellow sections to whiteness.

Wet plastic napkin

On the shelves of computer stores, you can find napkins that are impregnated with a special substance, the action of which is designed for plastic surfaces and monitors of computers and laptops. Here are such napkins can be cleaned plastic and get rid of yellowness without much effort. The main thing is to rub dirty and yellow places every day, and a couple of days there will be no trace.

Such napkins, best, whiten plastic on washing machine, refrigerator, as well as rub plastic window sills. The fact is that the napkins are very soft in texture and does not require mechanical effort when cleaning, and this is a guarantee that the technique will remain without damage, scratches and will shine as new.

Plastic spray cleaner

Use professional sprays-cleaners is advisable, as they not only eliminate the yellowness, but also create special protective on surfaces external factors exposure to film. The only minus here, which can be allocated, is the high cost of such sprays. But it requires the minimum amount of such a product to clean the plastic and it is enough for a long time.

Such sprays are also suitable for cleaning the yellowed plastic on the washing machine, the refrigerator and the windowsill and even on the computer power supply.

If the plastic parts are small, then they can be left overnight in the chlorine-containing bleach, which for such a long period will not leave a piece of yellowness. But, unfortunately, this method can only be used with small objects that can be wetted (for example, the toaster is no longer omitted). Just rub the yellow sections with a bleach with chlorine makes no sense, since for the effect you need a long exposure to this component.

Instead of a chlorine-containing bleach, you can use a solution with soda calcined:

• On the liter of water to take a tablespoon of soda, the same amount of washing powder or a tablespoon of chlorks.
• In the resulting solution, soak the plastic product for 10 hours (if the yellowness is strong - then you can make a longer soaking).
• After soaking the plastic part, rinse under clean water And wipe dry.

Using Pergotra

Pergel is the most common hydrogen peroxide. It is necessary to act in this case by such a scheme:

• Pour a little perhydron on the sponge.
• Sponge go through the yellowed surface.
• The procedure is repeated three times one time per day.

Liquid remover with acetone

Given that this agent has a very aggressive effect and can dissolve plastic, it is necessary to act quickly in the horizontal direction from top to bottom. In this case, a textile napkin is used, which is applied with a liquid for removing a varnish with acetone. It is important to monitor that acetone does not remain on the surface, otherwise the divorces will arise, from which it is already impossible to get rid of.

Vinegar against yellowness

The undiluted acetic essence (70-80%) should be dripped onto a cotton disk, then rub the places that succumbed to the yellowness. After that, the surface should be wired with a damp cloth and over the dry cloth. Before starting work, you must necessarily wear rubber gloves.

Video: How to whiten the yellowed windowsill and windows?

Not all above listed methods Suitable in order to eliminate yellowing on the windowsill and plastic window. Alternative instruction By whitening is presented in Video:
We also recommend reading the article :.

Hostess at a notes

In order for the plastic is not a jewel and did not lose its initial impeccable look, you should use the following recommendations:

• In the room where plastic window sills are installed, you should not smoke, since with time plastic will become yellow from nicotine.
• In order for the plastic longer to maintain whiteness, you should take it from direct rays of the sun.
• Plastic washes only soft sponges or special napkins, when using another inventory, you can leave scratches on the surface.

The appearance of yellowness on plastic is not a sentence, because there are plenty of funds that help effectively eliminate the problem, and at the same time they do not take a lot of time and effort. If you fulfill all the recommendations, it is even strongly yellowed by plastic you can give the second life!

Plastic - lightweight, moistureproof and wear-resistant material, which is successfully used for the manufacture of furniture, dishes, interior and life items, as well as all sorts of finishing elements (panels, windowsill). At the same time, plastic is not afraid of acids and alkalis, but it does not tolerate high temperature and coarse abrasives. We learn how correctly and quickly, without damaging the surface, remove stains from the plastic.

Council. Before making spots, be sure to check the action of the selected tool on the invisible area.

Traces from markers, markers

If there are small children in the house, it is not surprising that plastic tables or window sills are singing with the creations of young "artists". Ways to remove traces from markers or markers somewhat:

1. Gently wipe the evaporated plaque with a clean napkin dipped in a medical alcohol or vodka.
2. Treat the stain to the WD-40 tool, excess paint is removed with a wet sponge.
3. "Remove" a bright track with a dry melamine sponge (relevant, if pollution did not have time to enjoy himself).

Fat oil, oil

Fat stains on plastic (for example, kitchen surfaces) are perfectly removed by simple folk remedies.

1. Wash the contaminated area with a conventional soap solution (an economic soap is suitable as an active tool, a gel for washing dishes like Fairy), wipe dry.

2. Food soda will not only clean, but also disinfect. Prepare soda cassea and warm water. Gently, not to damage plastic, treat the oil trail with a sponge.

3. A table 9% vinegar can cope with the dilated fat. Pour pollution them, after 5-10 minutes, wipe with warm water.

4. Not bad removes the empty oil ammonia (ammonia 10%). Prepare the solution (1 tbsp. Spoon per liter of warm water), moisten a sponge, wipe the stain.

Cleaning plastic from glue and scotch

Most of the difficulties cause traces left by glue or scotch. The stripping, sticky substance becomes similar to the plastic, you have to act as carefully so as not to damage the surface.

1. Try to drop the stains with acetone (lacquer removal fluid), purified by gasoline or white spirit. Be careful: such solvents may not be suitable for color, as well as a plastic film.

If we overlooked with the solvent, and now the blessed divorces are "branched" on the summer table - do not panic. Acetone's small stain on plastic can be output using any vegetable oil: Moisten a clean cotton disc and polishing movements to treat the affected area.

2. Fresh traces remove the usual eraser. Please note that this method is quite time-consuming, therefore it is only suitable for cleaning small areas.

3. Start a piece of scotch piece into a contaminated area, chopped with a sharp movement - most of the glue will remain on the tape.

Scotch - the fastest method

4. Some glue manufacturers produce antipode products - "Antiques". This tool can be found in a business or construction store (apply according to the instructions on the package).

Yellow spots on plastic

If there are soased yellow divorces on the surface, which are not removed with alcohol or economic soap, try the usual "whiteness". Injuite a tablespoon of the bleach in 5 liters of cool water, moisten a sponge or brush in solution, treat pollution.

3% of hydrogen peroxide possesses a good bleaching effect. Soak the composition of the pure rag, cover the yellowed area. After 10-15 minutes, wipe thoroughly.

Economic stores offer a wide range of "chemistry", which is quickly, and most importantly, carefully removes the stains of any origin. Pay attention to Mr. brands Proper, CIF, Dr. Beckmann, Glorix, Pimolux.

Prevention of spots on plastic

1. We wash out fat, butter, ink traces. The fresh pollution - the easier it is to cope with it.

2. Buy a special polyrolol. To save yourself from the need for hours to rub stains on plastic, it is enough to regularly handle the gravy furniture or a windowsill with a polyroller.

3. Take care of white plastic from direct sunlight - in such conditions, the surface "burns out", purchasing a yellowish tint.

You need to remove old spots and rust from the windowsill, but you do not know how to do it? Want to put in order such surfaces after repair? There is nothing easier. In order for you to cope with this task, let's wonder than washing the plastic window sill.

To wash such surfaces did not give you special hassle, you should pre-prepare all the necessary domestic products for such washing. In order to clearly clean the plastic window sills, you will need:

Also in this case, rubber spatulas may be useful (if you are going to clean the plastic after repair work indoors) and old toothbrushes. They can be easily and quickly cleaned. inaccessible places, For example, a plot under the plastic window frame.

As for the means that cannot be used to work with plastic window sills, they need to include abrasive products, household chemicals with high alkali content or acids, since all of these means may damage the structure of polyvinyl chloride. Also, it is impossible to use hard sponges and brushes to clean the window sills - they can scratch the surface. You can't restore the window sill after such an impact.

Stages of cleansing windowsill after repair

If you want to clean the windowsill after repair, you will need to apply several different means. You should act in such a way:

Tip: If the first time you failed to clean the windowsill, you can repeat this procedure from the beginning to the end. If not from the second, then with the third time you will be able to bring the windowsill in the perfect condition.

How to get rid of oily spots with the help of household chemicals

In order to get rid of gray Nalea and dirt on the windowsill can be used different kinds Household chemicals. So, if you do not have the opportunity to buy a specialized powder or spray, you can apply the usual dishwashing detergent for this purpose. It cleans fat and other contamination, although it is flushed longer than professional formulations for plastic. You need to use these tools like this:

1. Take a wet kitchen sponge, dial a small amount of money on it.
2. Apply a sponge to the surface to the surface, in the places of special pollution, thoroughly rub it.
3. Leave the tool for 10-15 minutes. After that, wash off the remains of household chemicals with water and wipe the windowsill with ordinary napkins.

Also from spots of fat on the windowsill, you can get rid of ordinary funds For cleaning oven or microwave. They are also safe for many types of plastic.

What to remove rust and old spots

If you are interested in specialized formulations that remove rust and other complex stains, you should give preference to special aerosols. Well-established means such as Cillit Bang, as well as Mr. Proper wagon as a powder. This type of household chemicals perfectly copes with mud, without damaging the surface. Also, all sorts of creams and gels are also very good for this purpose, for example "Pemiolux", as well as "Domasetos" (it is often used to remove rust).

In use, the funds presented are quite simple. They must be applied or directly to the surface (if it is a spray or paste), or on a cloth from the microfiber, then it is necessary to leave the product on the windowsill for 5-20 minutes (depending on the manufacturer's recommendations). After that, the tool will need to thoroughly wash with water, otherwise divorces may remain on the windowsill.

If you have a lot of old stains on plastic, they can stay after the first wash. It is not necessary to despair in this case - just repeat this procedure 2-3 times, and you will achieve the desired result.

Important: Remember that such means can damage your skin and cause allergies. So that this does not happen, you must certainly wear gloves while cleaning, as well as respirators and certainly carry out the room immediately after cleaning. It is not recommended to use such such cleaning compositions to people suffering from asthma or other chronic respiratory diseases - they can cause exacerbations of such ailments.

How to whiten the windowsill

If your white plastic windowsill swelling, you can return to him the primordial type of washing powder for white things. You can do it like this:

1. To begin with, you need to dissolve powder with water to the state of Cashitz.
2. The resulting paste must be applied to the windowsill with a sponge. If there are old spots on the surface, they are recommended to wipe the rigid surface of the sponge. The cleaning agent must be left on the surface for 10 minutes.
3. Then it is necessary to wash off the powder residues with a large amount of clean warm water. Immediately after that you need to wipe the plastic with paper napkins. Leave traces of funds on it in no way need - gray spots may appear.

Video: How can I miss the windowsill?

You can also clean the light window sill at home by conventional overs. To do this, you need to take a half-liter jar, fill it up to half with the kneaders and pour them with warm water. Next, you need to wait until these kneadings dissolve, apply the mixture to the windowsill, wipe the surface well and wash off the residues of soap with clean water.

Cleaning the windowsill folk remedies

If you do not want to use purchased tools for the windowsill of the plastic window, you can clean it with household compositions. What is better to do it? There are several proven tools that can be used without harm plastic, it is:

Important: Using these means to purify plastic, be sure to wear rubber gloves. So you can protect your skin while cleaning.

What if you can't clean the plastic window sill?

In some cases, get rid of yellow and old spots on the windowsill using household chemicals or folk remedies Extremely difficult. What if you tried all possible funds, but did not get the desired result? In this case, you can cover the surface with a white or bright decorative film that hits the contamination, or close it with decorative wipes.

You can also resort to the help of specialists to remove forged stains. If the professionals who came to your house will not know how to wash the old plastic window sill, it will be wiser to just replace it with a new one.

Plastic is a material that is often used in the manufacture of household appliances, as well as in the production of windows and other products. Easily washable, withstanding the effects of acids and alkali, it is not afraid of water. However, plastic has one unpleasant quality - the ability to turn yellow.

The reasons why the plastic yellow is somewhat. The most basic:

• the effects of sun rays (ultraviolet leads to a partial decay of the plastic surface);

• temperature differences;

• additives that are included in plastic.

That is why the windowsill on plastic windows, surfaces of refrigerators and microwave ovens.

How fast the yellowness appears on the plastic, it will not be possible to guess. Since it depends not only on the three of the above factors, but also on the treatment of plastics.

So, the substances that are part of detergentsFrequently used by hostesses for cleansing plastic surfaces can also have a negative impact on the material and lead to yellowness.

However, you should not despair if the plastic is desirable. Remove the yellowness is not easy, but you can use the use of infringers.

There are several ways to clean the plastic from the yellowness that appeared.

Method number 1. With the use of economic soap. Half a piece of household soap must be grate on a large grater and pour a glass of warm water. Wash until the cooked solution will not be a casczyce substance. Apply it on yellowed surfaces and leave for 30 minutes, then lose contaminated places with a rigid sponge and washed with warm water. If necessary, the procedure can be repeated several times.

Method number 2. On a soft rag napkin, apply a small amount of ethyl alcohol and wipe distressed areas. Ethyl alcohol is particularly well coping with the advent of yellowness from sunlight.

Before the start of use, the impact of alcohol should be tested on an invisible area, since having chemical composition, alcohol can harm the surface.

Method number 3. The windows can be perfectly cleansed with a mixture of washing powder and food soda. Both components are mixed in equal proportions (on one tablespoon) and pour 0.5 l warm water. Dissolve the crystals of powder and soda in water, the solution is applied with the help of a sponge on window Rama. Both window sills, leave for a long time (6-8 hours), rinse with clean water. Such the method will suit Also to eliminate the yellow plaque on the refrigerator.

Method number 4. Good and quickly able to whiten the yellowed plastic car cosmetics sold in auto shops. She will not only wash the plastic, but also refreshes it. Funds in the form of sprays will help restore plastic, and polyroli and plastic cleaners are to maintain its original appearance for a long time.

Method number 5. While whiten the yellowed areas is possible with the help of napkins used to care for computer equipment. They will not harm surfaces impregnated with a special solution.

Method number 6. Hydrogen peroxide is able to remove yellowness. It is enough to pour a small amount to the sponge and wipe all the yellow sections. The procedure can be repeated 3-4 times. The effect will be necessary!

Method number 7. Some hostesses use acetone to remove yellowness from plastic. However, this method is very aggressive. Therefore, it is necessary to test on the invisible section of plastics.

Secrets helping to whiten the yellowed plastic, a lot. It is important to approach the cleaning process responsibly to not harm products. It is better to start with the use of less harmful and more remedy.

Wash the plastic product without divorces is quite difficult. However, there are no secrets in caring for plastic.

The safest way daily cleaning will wipe the plastic surfaces with soapy solution. It is necessary to simply moisten in it a soft napkin, squeeze well and wipe all sections of plastics. After the procedure, all products wipe dry.

It is impossible to use cleaning powders and other substances that can scratch the surface, because the dirt is easily falling into the cracks.

Perfect for daily care of plastic products for washing dishes, liquid soap, wipers (without alcohol), gels for the shower, shampoos, poly rays that have no wax in their composition.

Do not hurry to throw out a thing if plastic has undergone irreversible changes. In any store building materials You can find aerosols that are suitable for staining plastic surfaces. Then the product will acquire a "new life"!

In rooms where there are plastic products, you should not smoke and, if possible, as often as possible you need to ventilate the room.

The process of daily care for plastic surfaces is quite simple. The main thing is to comply with the rules and act without superfluous fanaticism, then appliances, windows and other plastics items will delight their whiteness for a long time!

Unfortunately, plastic has a property slowly and very confidently absorb dirt. Compliance, minus plastic window and plastic windowsill - fast accumulation of dust and dirt.

Even if the dust is cleaned with a dry cloth every 2-3 days, can not be avoided. Therefore, everyone should know what to wash plastic windows and window sills to save a beautiful look.

First aid for the windowsill: prepare a soap solution

Before cleaning the plastic window sill, you should know that plastic cleaning agents are conditionally divided into 2 categories:

1. Industrial: effective, do not contain abrasive particles, acids, but cost.
2. Folk recipes are not as effective as the first, but almost free and always at hand. Also among the benefits of folk remedies - safety, since they do not pollute the air of chemistry and do not distinguish pairs.

Among the safest means for washing plastic window sills - soap solution, soap paste or powder mixture.

Simple solution is prepared as:

• 40-50 gr. Any soap rolls on a coarse grater.
• Divorced in 1-2 liters of warm water.
• Wait for complete dissolution.

Water can be used less, then the concentration will be higher. Powder is also bred by water so that all grains dissolve.

It is impossible to wash plastic windows such as ammonia, lemonic acid, soda, mustard. This will entail the formation of microcracks and scratches.

Now we take the prepared cleaner and apply to the dirty window chassis. We leave for 3-5 minutes. Next, intense three sponge. Wash off warm water.

The dirtiest side of the window sill is a gap located under the frame.

Then, how to wash the plastic window sill in the place of this gap from the dust and other dirt accumulated in it? An old toothbrush will be useful here.

How to clear uncomplicated (domestic) pollution?

Very often you need to know what can wash the plastic window sill, if there are drums from windows, traces from pots with flowers or rust?

It is suitable gels of trading brands Sif, Domasetos, Mr. Proper, Santri. To work with them you need to have a rigid sponge and rubber gloves. Before washing plastic window sills, you need to explore the instructions and follow its instructions.

Depending on the nature of pollution and purpose, apply:

• Domasestos - for bleaching the surface.
• Mr. Proper (powder or gel) - for rapid cleaning. In 5 liters of water, 3 st. l. funds. A window sill is wiping, thoroughly washed off with warm water with a soft sponge, dryly wipes with a paper towel.
• Cillit Bang - copes well with rusty subteps. The tool is sprayed on a dirty place, lightly rubs with a rag and left for 10-15 minutes. Then washed off the contamination with warm water. Conducting such procedures, you need to keep windows open, because there will be a very pronounced sharp smell.
• Sanita will destroy fat stains And soot. Applicable from yellow spots, has a strong smell, so removal is better made with an open window. To enhance the effect, the applied tool is left on a stain for 10-15 minutes, after washed hot water And wipe the windowsill to dryness.
• The remains of cement and gypsum, rust and primer well removes the szop tool.
• Small spots will remove the pematux cream. It refers to the category of sparing means without a sharp smell. A stain is applied with a dry cloth cream, slightly rubs and after 10 minutes is washed out with hot water.
• Complicated spots are deleted Cosmofen 10. This is a toxic drug, so it is necessary to work with it in the respirator and protective gloves. Cosmofen 10 is applied to a rag, which is clutching a dirty place. It is necessary to delete with plenty of water. When cleaning is finished, the room is well ventilated. The tool is used both from yellowness and stains more complex.
• Will remove traces of multi-colored chalk.
• Wet wipes for office equipment remove dust and small spots.
• Strong pollution (after repair, from plasticine, markers) well remove all glass washing sprayers.

Removal of construction mud

Windows with windowsill is installed at the very beginning of the repair, so it is not wonderful that they can be blocked. Even if they hide the film, it is not a fact that the dirt will not fall on the white plastic of the window sill.

Algorithm for cleaning of residual construction materials from the windowsill:

1. Removal of dust and dirt with a dry cloth, broom, vacuum cleaner. Then the remnants are wiping with a damp cloth. Any vehicle is not suitable. It is better if it is a microfiber napkin, cotton, flannel, fleece.
2. Application to remove plaster or putty, such as szop. A paste or gel is applied and 5-7 minutes will be listed for impregnation. If the windowsill got, then the maximum foam layer is cut off, and a paste or gel is applied to the remaining fragments. It is necessary to apply the means exclusively to the remains of the foam, after which 10-15 minutes to give softening.
3. Removal of complex mud (plaster, putty, mounting foam). The paste and gel are washed off with soap solution, the remaining dirt is raised by the rubber spatula. Mounting foam slightly scraping.
4. Wintering to dryness with a soft cloth.

It is important to remember that with contaminants on the windowsill, you need to start fighting immediately after the dirt hitting the plastic. The longer the stain is not removed, the more difficult it is then to reduce it.