A situation can happen with each person when the key in the process of closing or opening the lock key suddenly breaks and remains inside. How to pull out a broken key from the castle, most people do not know, so it becomes a real problem. The situation is really not pleasant, but you should not panic - if competently and quietly approach this issue, you can remove a fragment and any loss. If the case is completely difficult, then with the right approach, only the larva changes, but not a whole castle.

Why break the keys?

There are several reasons due to which the keys break inside the element. The first is the worn inner mechanisms of the castle, as well as the wipe key. With this it is impossible to do anything - it is natural during operation. Even keys break due to dirt and garbage in the secret lock mechanism. Often there penetrate various foreign objects. Often the key can break if the lock is trying to open incorrectly - for example, it is inserted into the well not until the end or by error the lock is trying to open with another key.

Often, the item can jam in the lock, and they are trying to turn it with force using an appropriate tool. Naturally, the metal under the influence of pliers, hammers or steel pins breaks. Well, finally, the keys can be made from low-quality materials. Manufacturers are often saved using inexpensive raw materials.

Soft methods

So, we have a broken key in the castle and you need to somehow extract. There are two ways to solve this problem - radical methods and more gentle methods. Often keys break due to dirt - the lock mechanism is literally clogged with garbage.

In this case, you can clean the mechanism from dust, as well as lubricate the castle. For this, any available lubricants will suit. You can use the popular WD-40 tool, engine oils, silicone, lithol, anything, which is at hand. In extreme case even sunflower oil will be used.

It is convenient to lubricate the locks with a syringe. It is necessary to rinse the core. Perhaps you have to do it more than once, until all the dirt comes out. Next, without sharp movements, you need to try to pull the debris on your hands or a girlfriend (for example, pliers).

Use oil

How to pull the broken key from the castle with oil? The mechanism is abundantly lubricated, and then with the help of tweezers or pliers, the protruding debris is easily and safely comes out. But this is relevant if a part of the key sticks out from the lock, for which you can grasp.

Lobziki

This tool in solving such problems is considered one of the most efficient and popular. In the process, you will need not a whole logsik, but only the cutting part. Lobzik blade need to be covered inside the larvae or the core of the lock under the key. Next, the tool gently rotate so that its teeth are up. So you can pick a piece of key and with the help of its contact with the teeth pull it out of the mechanism.

Selfless

If the jigsaw was not at hand, you can also use self-tapping screws. They are much easier to find them. But this the method will suit Only for sufficiently thick debris. With the help of electric or hand drills in the key on site, the slider is drilled by a small hole. Then screwed up in it. Next after a minor effort, the key can be pulled out.

Vibration

This is how to pull the broken key from the castle by vibration.

But it is effective only for disk locks. The first thing the castle pins need to be lubricating and then move them into one position with a broken key. Next, on the other hand, the castle is hammering - due to the vibrations of the wreck of the key can exit. It remains only to grab it with any suitable tool and pull out finally.

Awl

Experts recommend such a tool as timed. Castles are different, and the keys are different to them, but in most cases it is still possible to push into the gap between the wreck of the key and the well two sewn of a small thickness. Then, by swinging, you can remove the stuck piece.

Suwald

But how to pull the broken key from the castle of the Suvald type? The keys to these elements are usually a cylindrical pin with various beards. You can remove the chip with a brass or copper tube. The most important thing is the diameter of the tube. He must be somewhat. Length is selected based on the part of the key that remains in the hands. The diameter of the tube should be so that it is laid in difficulty on the castle pin.

Expanding the end of the pipe by heating by any affordable way, Her with effort is worn on a chip. When the item cools, you can try to get it from the lock well.

Neodymium magnets

Today these products have become very popular. They are very actively sold. Of course, the effectiveness of this method is small. But the power of a neodymium magnet is quite sufficient to remove the broken key from the larva.

What to do with hinged locks?

They break more often their internal fellow. This can be easily determined by the fact that the mechanisms are constantly in contact with the aggressive external environment. In addition, they have access to various vandals and hooligans. Let's see how the broken key can be pulled out from the mounted castle.

First of all, it is worth knocking on the castle, but it is important not to hurt the arms. Through vibrations, the jamps can start moving again and the key will fall out. You can also sew in the slot oil. Due to this, friction will decrease, and the rust will not be so prevented by the work of the mechanism. Also, due to the lubricant, the springs will be able to straighten if they were compressed. Sometimes corrosion can penetrate each element of the mechanism and the risk to break the key becomes especially high.

You can also dip the lock in the bath with any active chemistry. Some are used gasoline, diesel fuel, kerosene, acetone, weak solutions of acids, acetic essence, coca-cola, sprite. All these substances can affect corrosion products. But you need to remember that it is immediately impossible to get the result - you need time. Sometimes the process can last from several hours to days and more.

In most cases, after the impact of chemistry, such a problem, how to pull the broken key from it does not occur. The castle will give a fragment. But if the mechanism does not want to succumb, then you should try heating. If the product is made of stainless steel alloys or covered with nickel, then even the open flame is suitable. If the item is covered with a polymer or painted, it is impossible to heat the fire - it needs to be treated with boiling water.

Acts radical

We considered soft and gentle methods in order to remove the wreck of the key. And now let's see how to pull the broken key from the door lock, if nothing helped. You need to get the key together with the larva. If the door is also open, then everything can be done quickly and gently. It is enough to unscrew the lock bolts in the end and pull it out. If which consists of a block and base - cylinder, then the larva is simply released. And on the replacement it is purchased new for the castle of this type.

Next, the larva can drill a drill. These products are made of soft and light alloys and under the influence of drill and drill simply break. Then it is important to completely remove the remnants of the wreck of the key and larvae from the castle. It is convenient to make screwdrivers or hooks from the wire. After all, it is recommended to fully disassemble the castle for careful cleaning and replacing the larvae.

Here's how to get a broken key from door Castle More barbaric methods. But even if the professionals who are engaged in opening, the element will still have to be changed. They use the same tools - drills, screwdrivers, and the like.

Prevention

In order not to fall into unpleasant situations when the keys break and remain in the locks, it is necessary to carry out certain actions. The element is not less than once a year carefully cleaned with flushing with gasoline, kerosene. You also need to not forget to lubricate the locks with silicone lubricants - it will not only reliably protect the metal from corrosion, but also does not collect dust.

Above the larva can make a special protective cover. If the castle began to eat, it is better to replace it until the key started sticking in it. If the mechanism even cries slightly, it will continue further. And then you have to think how to get a broken key from the castle.

Keys need to handle carefully. No need to use them like a plumbing tool. Do not clap the door. Also, the second lock can also be installed for the safety net. Duplicates are recommended to do only in proven workshops.

So, we found out how to get a wreck of a key from the castle with different methods.

How to pull the broken key from the door lock

Our life is abounding with curious cases, but one thing when such a case causes a universal laughter and raises the mood, and completely different when it turns into serious difficulties. Opening once again the entrance or garage door can be accessed in the situation when one part of the key remains in the castle, and the second in your hands. Usually how you called you somewhere in a hurry, hoping, how quickly you can jump out home or in the garage, take some thing in order to run on, and one careless movement and it turns out that there is no sense.

I break the key, the most important thing is not to panic and do not make stupid in order not to aggravate the situation. No need to shove the debris in your hand in your hand in the key well, pushing the broken part even deeper, better take advantage of the councils of specialists on how to pull out the broken key from the castle, we presented them in this article.

Why is the key be chosen during the opening of the castle?

Before considering specific tips on extracting the key pieces from the lock of the castle, let's decide why such a key breaks down. There are really a lot of reasons for this. We define their thesis.

Experts claim that theoretically, with the help of thin steel wire, you can remove the stuck part of the key, but for this you need a snarling and it turns out this only in a very limited number of cases.

Pull out the broken part of the key, breaking the castle

Unless broke the key in the lock, then you need a fast and reliable way to remove the broken part from the keyhole, preferably without damping the lock. Reliable methods exist, well, the rate of extraction of the damaged part will depend on your skill. Perhaps the most correct way to solve this problem can be considered the extraction of a fragment from the disassembled lock.

But there is a problem, because you need to penetrate the room and open the door to access the lock case, and this is more likely not available. Therefore, this method can be taken by a note, in case you manage to come up with an alternative version of penetration into a closed room.

Pull the key will help the self-sufficiency

Comparely quickly and efficiently, you can pull out the stuck chip from the keyhole using a drill with a thin drill and self-pressing. Work is to be very subtle, worthy of the best jeweler. The challenge is to get a drill to the end of the jammed piece of the key, drill a hole in it and manage to screw the screws in it, if you act gently, it is quite possible.

Do not rush to pull for yourself or twist it, trying to extract the chip immediately, better sprinkle into the keyhole, the WD-40 liquid and gently shook the stuck part of the key. Only after 5-10 minutes of such a "swing", you can try, applying the pliers very carefully "to wipe" the debris.

We use pliers

If part of its debris is sticking out of the key of the key, is sufficiently sufficient to grab it with pliers, round-rolls or on the extreme case of a sharpening tweezers, it is worth trying to remove it with these tools. Again, doing this, do not repeat the mistakes of thousands of "grief-masters", which grabbing the chip of pliers, so much and thoughtlessly jerked, that they were repeated, exacerbating the problem.

Before starting "to wrap up" tool, you need to prettay to lubricate the insides of the locking well, and wait until the lubricant is cut, getting between the stuck debris and the walls of the secret mechanism, and only then perform attempts to pull the broken part of the key. Act carefully and the chances of success will be very serious.

Exotic methods for extracting a broken key from the lock mechanism

Summing up, we note that there are pretty unusual ways Extraction of a wreck of a key from the castle offered by professionals. Consider them too, as they clearly deserve our attention.

Probably all familiar stories when the key does not turn into a poorly running lock. Often it happens due to the extreme wear of the core of the castle, which, by the way of the backlash, caused by many years of his work is no longer able to accept the native key as its own.

If the wear is not yet critical, light movements from side to side with a simultaneous turn of the core can still be achieved. The main thing is not to overdo it with the effort attached to rotation, since the key can be collapsed, thereby spoiling its position even more.

A detailed guide on how to pull the broken key from the door of the door responsible to all questions will not be able to give no one, since all cases have their own nuances. This article summarizes the recommendations that will help to understand how and what will have to work in most cases.

What should I do if the key is already broken?

Immediately, we note that the information is relevant for two-way cores, that is, those in which the key is inserted both from one side and on the other.

In addition, access to the second side of the core is necessary, as some manipulations will need to produce there.

So, here is a list of the desired tool to remove the broken key:

1. Screwdriver. It will suit the cross, type Ph2 or PZ2. If there are no, it will suit the slotted, the length of the slot is 3 millimeters.
2. Lubes. The smaller this tool will be, the better, since the slope formed on the blades of the instrument, directly increases with the increase in their dimensions. This means that to capture the chip, protruding from the core by 1 millimeter, much more complicated by a large tool, the blades of which are closed at a distance of 2 millimeters from the end of the tool. The smallest, in which this closure will be 0.5 millimeters from the end, act easier. If there are no buns in the farm at all, it is ideal for cuticulus trimming, widely used by women around the world.
3. The second, not broken, the key from the castle. Must be from the opposite side of a damaged core.
4. Needle. It may be necessary if the nipples are scraped, at the same time tricking the debris deeper into the core.

It should be noted that the ordinary dismantling of the core, the owner will not help, because this item has a simple, but effective protection from ordinary disassembly. It is in a faded core dog, and, without having to turn the key, at the same time removing the core, it will not be possible to extract it.

Consider the first version of the repair in which the key was broken indoors. The door is open.

We disassemble the lining of the castle. To do this, unscrew 2 screws from the inside of the door, and carefully remove decorative elements. Unscrew the protective core lining.

Now, getting access directly to the castle core, insert a whole key on the back, making additional efforts to push the debris.

The core design allows you to push the broken key by 1.5 millimeters from the end of the part. Next, without removing the whole key, you need to grab the protruding lipplants, and fixing it reliably, remove it from the castle.

Despite all the simplicity, this process will take the bulk of the time to repair, as the plugs can constantly slip, at the same time pushing the fragment on the initial position in the core. If such slipping happened, use a needle to make a chip and output it back.

If the door was closed, and there is no access to the back of the lock, you need to constantly use a needle instead of a second key to pull the chip out on the necessary one and a half millimeters. Otherwise, the whole process is absolutely similar to the above manual.

If still the key was broken outside the door in its closed condition, then, without having relatives inside the apartment, the core will only have to knock out with a hammer.

If there is relatives inside the apartment, then not still lost. It is necessary to disassemble the locking decor on the back of the door, since all the screws are located there. Further, the relative should be asked to insert the key from the inside to push out the outflow for fixing with nipples.

Since the bruises in a person who is outside, most likely no, should be applied for the help of neighbors. Facebook required toolThe debris will be removed from the core.

If the key was broken and the door is open at the same time, then everything will be much simplified, since it is not necessary to apply for the shorter tools.

In conclusion, we note that if there are no neighbors, or they are, but they have no buns, you can always ask the relatives to transfer the tool through the window by throwing it to the flower bed in front of the house. Only, it will be possible to pull out the broken key from the castle, without resorting to the services of the repairmen.

Instruction

In order to get a broken key in the lock, you need to take a thin drink from the jigsaw, and then insert it into the lock so that the peeling teeth are located up. After that, you need to turn the pink so that it clings to the key. Next, it is necessary very neat, without jerks to pull the pink along with the wreck of the key.

If a piece of the key looks out of the well, you can do by conventional pliers. The main thing is to grasp the debris in such a way as to pull the key.

In the event that the wreck of the key is not visible outside, then the pliers will not help here. We must try to extract the key with a piece of steel wire.

If you can disassemble the castle, it will be the best way out. Indeed, in this case, the lock can be saved in working condition and less chances to damage it.

Also, the wreck of the key can be tried to extract with a super block. To do this, buy superciles, apply it to the remaining part of the key and gently insert into the lock. Then you should close a part of the key, wait, and gently remove the whole key. Subsequently, this key is better not to use.

Helpful advice

If you order duplicate keys, follow the blanks for them from durable metal.

One of the most common problems arising from operation cars- Singing the castle of the front door. To find out the cause of the breakdown, you need to pull out lock of cars. You can do this operation with your own hands without resorting to the service of car service.

You will need

• - cruciform screwdriver;
• - slotted screwdriver;
• - pliers;
• - wrenches number 8 and 10;
• - Marker.

Instruction

To pull out lock with front door carsRaise the glass and remove the upholstery. To do this, take a cruciform screwdriver and find it the detail, which is a plug armrest. Remove the handle with your hand. Unscrew the three fastening screws located in the recesses of the armrest, with the help of a cruciform screwdriver. Enter the end of the slotted screwdriver between the lining of the handle, located on the windows and the outlet. Separate the cladding of the handle from the outlet, pressing them away from each other. Remove facing material pens. Pull out the socket and the handle itself from the door. Remove the facing material from a small locking lever, pushing it with a slotted screwdriver. Press the slotted screwdriver seven plastic locks that attached the upholstery located on the side of the door. Take the upholstery down and remove it from the inner handle of the door.

Start pulling out the castle. Using a cruciform screwdriver, unscrew the two screws of the rear groove located on the door of the door. Slightly lower lock And remove the tongue from the groove. Return lock to the side. Disconnect the button closing lock. Disconnect the switch of the switch located on the outside of the door.

Unscrew the nut locking the front groove, with a wrench number 8. Move the plastic plug, lower the groove down and disconnect it from the swivel glass frame. Remove the front groove from the door. Remove the two screws located on the front door handle using a cross-shaped screwdriver. Put the handle on the door. Remove the crosswise screwdriver three screws that are on the door of the door and fixing lock. Remove lock From the door with the handle and pull. Unscrew the three bolts of the fixture attachment, using the spanner number 10. Remove the lock lock.

Video on the topic

note

It is best to produce all types of work in protective gloves, as practically all manipulations are made in extremely uncomfortable places, and the likely to damage the hands about the metal edges of the partitions of the door.

Helpful advice

To improve the lock operation, unscrew the retainer screws and move the lock to the desired position at which it will easily open and close.

Broken keyFor example, from the apartment or from the garage, is a lot of trouble. But great trouble brings key Then when he is broken directly in the castle. For the removal of a debris from the castle you can use different waysBut not the fact that they will always be effective. In such a matter, in addition to the skill, it is necessary to have a little good luck. For each individual, a separate approach is needed.

You will need

• Pliers, rust fluid, brass tube, soldering lamp, screwdriver, magnet.

Instruction

Video on the topic

Imagine a moment the situation: after a hard work day, they returned home, put the key to the keyhole, but instead of clicking the opening lock, you hear the key crunch. Catastrophe! How to get into the apartment? Do not panic: the situation is corrected.

You will need

• - Pilochka from the jigsaw;
• - pliers;
• - drill with a drill;
• - Bulgarian;
• - screwdriver;
• - Lomik.

Instruction

To begin with, pull out the broken key that is stuck in the keyboard. Ask a file from the pubsik. Take it and insert into the keyhole so that the peeling teeth are directed up. Then slowly turning the sawing, try to hook the key. After that, slowly pull the file with the key out.

If a piece of the key looks out of the door, then open the inlet door and pull the key using pliers. Cook the tool for looking out the edge of a broken key and take it carefully in the direction where the key turned out, opening the door. After the door opens, drag the key on yourself.

If the key to pull out, but the castle did not open, perhaps the problem lies in the fact that the castle itself broke. Try to get to the inner mechanism of the castle. Perform it quite easily if on entrance door Installed "" Castle. To get to the internal mechanism, drill the cylinder, then remove the lock "larvae", and after using metal hooks, it hook a drive mechanism, so that the riglels are in the castle housing.

If the lockings of the castle are viewed between the door clove and the box, cut them with the help of a grinder.

In the event that the entrance door has even small backlats, try to pose it with a strong screwdriver and a lomika: this manipulation will allow you to determine the vulnerable door of the door, so that it could be discovered without damaging the door canvas.

note

If you decide on Extreme - shighted your capabilities from the neighbor's balcony. Perhaps the risk is not justified! To do it too dangerous at a high altitude, without having a safety net!

Helpful advice

Take advantage of the services of the service whose specialists if you have a passport or another document, testifying that you really live in this apartment, you will open the entrance door.

If you have fallen into a situation where the key in the door lock broke and you do not know what to do, you will definitely use further recommendations. Unfortunately, everyone risks to face such a problem. From day to day, the castle is to wear out, dust is stuffed inside, and proper care provides not every owner. In addition, the key can also cause damage if it is incorrectly inserted and inadvertently breaking when trying to turn. Well, if the key is just slightly stuck and it can be removed from the castle without prejudice to the secret. And what if the chip falling down far inside the mechanism and blocks access to the apartment?

I broke the key in the castle - such a nuisance may occur with each

Useful tools

The situation when the key gets stuck in the door lock is not uncommon. What do everyone is obliged to do in this case. There are many methods for eliminating this problem, but not always at hand there is a whole needed tool. What can help unlock the mechanism and remove the chip?

Useful tools and materials:

• screwdriver;
• awl;
• hairpin;
• lobzik;
• passatia;
• nail holder;
• tweezers;
• a hammer;
• drill;
• bulgarian.

Required toolkit to remove the broken key from the castle

With these objects or their analogues, you can try to get a wreck of the key and open the door. At the same time, all methods can be grouped into three categories:

• Sparing. In this case, the ability to function the shut-off mechanism is maximally saved. The main task is to extract the stuck or broken key without damage to the secret.
• With damage to the castle.If the debris is too deep, nothing remains anything else, except to disassemble the castle. In some cases, it can be restored after non-hard manipulations, but often the need for its complete replacement occurs.
• Rough. This is extreme measures when nothing helps, and naturally it does not work out the door from the door. Then, most likely, you will have to not only change the fittings, but also the door itself.

It is better not to bring to this and call the wizard, which gently eliminates the problem.

Splashing methods

The smallest threat to access to the apartment you carries the situation when the key remained as much, but just stuck in the door lock. It needs to be carefully pulled out without damaging the pins inside the secret. Most frequent cause In such cases, the mechanism is scored by mud. In order to get the key, it is necessary to clear the accumulation of dust. To do this, you need one of the following funds:

• WD-40;
• machine oil;
• solidol;
• liquid silicone;
• litol.

As well as the stuck wreck wrench will be easier to pull out if a little lubricate the castle

In the extreme case, take sunflower oil and fill it inside. It is very convenient to do it with a syringe. You need to rinse in the literal sense of the word core. When the key is stuck in the lock you can not do sharp movements, carefully tighten it with slow loosening movements and pull out. If your hands slide, you can use passas.

Sometimes the mechanism is blocked by broken parts inside the well. In this case, you need to lift the blocking item with a pin or studs and release the key.

But how to get the wreck of a key from the door of the door lock? To carefully open an apartment and not damage the mechanism can be used by the following methods:

• Butter. The principle of action is the same as with a whole key. You can use tweezers or passatages to capture if the protruding edge allows you to capture it with a tool.
• Lobzik. This is one of the most efficient and popular methods. Not the entire tool is used, but only its cutting part. The blade is existed inside the core under the key and gently turns to the teeth to be top. Thus, it is necessary to catch the debris and through contact with the teeth pull it out.
• Saws. This option is suitable only for thick debris. With the help of a drill, the hole in the layer is dried and the self-screwing is screwed into the inside. Next, you need to capture it with passatsia and pull out with the broken part.
• Vibration. This very unusual method is primarily suitable for disk mechanism. First, it is necessary to carefully lubricate the pins and move them along with the fragment in one position. Then, on the back, pick up the lock with the hammer and under the influence of the created vibration the key must go out a little. Then pick it up and get the passage.

To remove the wreck of a key from the lock, you can try various ways

Removing the castle

If the key broke into the lock, and it does not work out the above methods, you will have to resort to the dismantling of the mechanism itself to open the apartment.

Methods for extracting the secret for all types of locks are different. The easiest way to cope with cylinder varieties.

Consider how you can pull the key and the lock itself from the door:

• Knock the cylinder. To do this, you need to remove the front-layer on the reverse side, if it is available, remove the screws and catch on the protruding cylinder with a hammer.
• Pry core. You can use seer, thin screwdriver, hairpins and other healthy items. The tool is entered into the well, and then lifts the pins in the secret to free the debris and open an apartment. At the same time, the mechanism is very easy to break, so you need to do everything extremely gently.
• Drill cylinder. This is a standard way to open the doors. The cylinder is drilled above the well, slightly turns and extracts outward.
• Twist the castle. For work, you need a gas key. The protruding developed cylinder must be captured by the tool and turn 90 degrees, and then pull out the outside.
• Remove from face. If the door remained open, you can just get the lock from the canvas and disassemble it in detail. At the same time, the fragment should not interfere, that is, sticking out of the well.

For complex cases of key jams, they resort to the dismantling of the castle mechanism

Extreme measures

Extreme measures to open the door lock if it accidentally broke the key is unlikely to arrange any owner. However, sometimes you can not do without them. If all of the above methods did not bring any result to an even account, and to the house you need to get very urgently, then touch your teeth and break the entrance.

One way to cut the locking of the lock. For this, they should be seen in the gap between the web and the box. To work is a hacksaw or Bulgarian. You can also cut the castle, but in this case the door will be unusable. True, the metal can be welded in the form of insert and bring everything into a normal look. Another option is to cut the loops. It is not always possible, since modern designs have special protection and anti-removable rigels.

In order not to get into such a situation, the mechanism inspection should be carried out regularly and lubricate the lock. When detecting jams, you need to immediately replace the secret. Also pay attention to the state of the key: if he brought himself or has no devils, trouble is not far off and better throw it away.