One of the most unusual ways Posted by room a solid and even chic appearance is the upholstery of the walls with a cloth. Such drapery is rare enough, and fans from standards in creating their residential space can definitely advise this option. After all, he is really able to surprise.

One of the most popular ways to create an interior of the century ago was precisely being considered by us today. It is known to know their bedrooms, halls and treasurers in the era of the Middle Ages. Naturally, the most expensive fabrics were used in the design, which only you could get at that time - silk, a group, velvet and others.

Since then, everything has changed much, because a huge number of ways have appeared to transform the interior. However, the fabrics on the walls are still used as an alternative to standard plaster, painting or panel cladding. Yes, and the range of tissues themselves became much more, and the photo interesting designsCreated in a similar style, we can in large quantities to observe the internet media.

In which premises this finish will be relevant

• Bedroom. The fabric on the walls creates an incredible comfort, and the bedroom is the most obvious place for this. When it can use similar textiles, both for walls and for bed linen, curtains and other things;
• Living room. It's not just about classic interiors, such as finishing in the style of Provence, but also about modern minimalist and high-tech versions. After all, fabrics do not necessarily be with patterns, and with such an approach it is quite possible to give the mills extremely attractive modern species;
• Children's Cheerful fabrics with drawings of children's themes or just bright landscapes - the variations of the finish here are really a lot, and it can be created with the wishes of your child.

Advantages and disadvantages of such a finish method

• A large number of designer options due to huge varieties in the tissues;
• All irregularities and other flares can be effectively hidden behind the tissue layer. Such method is the fastest in the finishing of the premises;
• Under the layer of fabrics, a foam or other insulating material can be mounted, and in connection with the room it becomes warmer. In addition, under the layer of fabric you can hide wiring and communications;
• In the textiles covered, the rooms are no echo, since in this way the walls are absorbed by sound waves;
• The surface finished surfaces do not react to the shrinkage of the walls, so it is possible to carry out such work immediately after the end of the construction;
• If necessary, you can quickly remove the old fabric and pull a new, radically changing the appearance of the room;
• High environmental friendliness;
• Installation process is very simple and does not require professional knowledge. At the same time, this method of finishing is also the cleanest, since the dirt and garbage does not occur during the process.

Important! There are special fabrics for finishing walls, which are treated with protective impregnations, allowing such material to be more resistant to pollution, dust and ultraviolet radiation.

There are such a way to give the walls external view and disadvantages. The first is that such fabrics can be very expensive, and prices for most types of wallpapers will be more democratic. Also, this method of decoration of walls is unsuitable for premises with high patency, as the fabric gets rapidly and come into disrepair. Yes, and in the urban apartment, this approach will be less attractive than in a rural house removed from the tracks. The reason in dust, which will not only spoil the view of the walls, but also lead to allergies.

Important! Solving the situation in this case will be the use of such a way of installing tissue on the walls, which will allow you to quickly remove it, wash and mount it back.

Another disadvantage is that the life of the tissue coatings on the walls is less than that of the same wallpaper. However, the simplicity of the change of fabrics is leveled.

Which fabric is better to use for wall tightness

The most popular fabrics - linen and cotton are not suitable for these purposes, and preference is better to give synthetic materials as more resistant. Among the latter, polyester, polyamide, viscose and polyacryl can be distinguished. If you are an adherent of natural, then you will fit Jute, Sizal, Jacquard and them like. The advantages of Jacquard and the heavy tissues like it are also the fact that they have a high degree of sound insulation.

If you use a cloth for the upholstery of wet room walls, it is better to use the synthetics for this, which is predeforeced to be treated with water-repellent materials. As an option, you can use a fabric for furniture upholstery, as it already contains impregnation, increasing stability. At the same time, the very concept of "wet room" does not mean that the cloth can be covered with the walls in the bathroom or in the kitchen. In these rooms it is better to use other ways to finish.

Important! Use only those tissues that are not stretched. Otherwise, saggings will quickly appear on the wall.

Basic Fabric Mounting Methods for Walls

Tie on the rail

On the perimeter of the separated area, the rails are stuffed to which the tissue is stretched. You need to start from any place from above, stretching the canvas and securing it to the rails of cloves or furniture brackets. Similar work is done below. And so consistently we do in several places, after which the tension and fixation in the corners at the final stage are carried out. At the same time, this method is attractive in that in parallel with the installation of the rails, it is possible to mount the material and insulated wall material.

Tie tissue tank

A very difficult version of covered walls, which is better to carry out with an assistant. After choosing a cloth, which will be about 12 centimeters longer than the height of the wall, we scores one of its angle at the start of the finish, after which they score the opposite angle at the same time stretching the fabric. Next comes the most difficult moment - the need to install the rail and tensioning the tissue under it. Fasteners need to be carried out at a distance of about 0.15-0.2 meters from each other, pulling the fabric in the course of work. Make sure that the folds are not formed during the work. All that remains now to do - hold similar works bottom.

Blind

The process resembles shook wallpaper. It, as well as the method described, is better to exercise with a partner. First of all, we must wove the wall with furniture glue. Applying a slightly more composition at the edges in order to prevent the dissolution of the fabric angles in the future. Try not to leave no glue to the wall of the wall. At the same time, you can process the entire surface at once, since without temperature effects, the glue composition is frozen long. For this reason, gluitive cloth is necessary with the iron stroke.

It is necessary to start work with fixing the upper corner with a clove, after which the partner begins to hold the fabric from above, and the second is to stroke it with an iron, to set glue. It is important not to stretch the tissue, but to apply it naturally, since glue for some time saves elasticity, and this can lead to deformation.

Important! Unlike other ways to finish the walls with cloth, this is demanding for preliminary preparation and alignment of the walls.

As in the blending of wallpaper, the fabric can be bubble in some places. In this case, simply proceed in it and release the air. If bubbles began to appear the next day, then you can release air, after which it is possible to heat this place with an iron and glue the wall. Total furniture glue to frozen may take up to 3 days.

Beautiful, sophisticated, stylish interiors Created with tissues that are separated by walls. Combining them with other materials, designers create luxury decorations for the premises. It is believed that this work is under the power of only professionals. In this article we will try to convince you that the walls of the walls can be performed with their own hands.

Fabrics are specific material, it is advisable to use them for wall decorations in:

• bedrooms;
• living rooms;
• cabinets.

But in the hallway, in the kitchen, in the children's room, such a finishing material, like fabric, undesirable, is difficult to clean them, and these are those places where the walls are rapidly polluted.

Advantages and disadvantages

Fabric coverage has many advantages:

• it is beautiful and aesthetic;
• masks disadvantages of walls and wiring;
• allows you to maintain heat;
• absorbs sounds;
• natural fabrics make walls breathable;
• it is elastic, so the shrinkage does not affect the quality of wall decoration;
• if the fabric is wide, then seams are not visible;
• the finishing process is not accompanied by a large number of construction debris.

And to disadvantages of wall decoration, the cloth refers:

• that it is more complicated than wallpaper;
• non-easy care.

What fabric to choose

In general, it is possible to separate the walls by any cloth:

• genuine: flane, silk, cotton, jacquard, parol, atlas;
• artificial, i.e. viscose;
• mixed. This is when silk, wool, flax are added to cotton;
• synthetic, wherein polyamide, polyester, polypropylene belong. Material for the release of synthetic tissue used for wall decoration is a modified non-combustible synthetic fiber. Peeling is not formed on it, it does not mind, does not save static electricity and dust, it does not fade.

Choosing the fabric you need to look at such characteristics:

• how it behaves under the influence of sunlight. Will not burn out after a while;
• whether it was a special processing that increases its service life;
• does not tire with drawing with its brightness;
• does hardening in the form of a foam rubber on the back of the tissue base.

For example, Belgian Bekaert Textiles fabrics that differ:

• ease of work on their wall mounting;
• do not require special care;
• lack of smell;
• dense weave of jacquard drawing and the presence of teflon coating, which makes fabric invulnerable before mechanical damage;
• resistant to moisture. BekaRt Textiles are caught by even bathrooms and saunas;
• a huge number of colors, shades and design solutions. The wall decoration with a cloth whose photo is located below, is made just from the material from Bekaert Textiles.

Quality and Swiss fabrics from Creation Baumann, characterized in:

• special strength;
• sophistication applied with a laser, drawing;
• multiple shades;
• the presence in the Dimmer Sky fabric collection with the starry sky effect.

Keep in mind: buy fabrics a little more than required by calculation, perhaps, after the incident of the year or two, some kind of site will have to be restored.

Finishing wall cloth with your own hands the most common way

Separate the wall with a cloth in several ways.

Ways finish

There are such methods with which the walls decorate the walls:

• casting. This way is most often used;
• upholstery;
• drapery;
• decorative niches;
• application;
• shirma zoning.

Preparing the walls to pasting fabric

The method of finishing walls with a cloth, which we will now consider, is used most often. They usually finish not all the walls in the room, and 1 or 2, or at all, separate some section of the surface, therefore, they emphasize on the picture placed there or TV. Before crossing walls with cloth, technology is provided for the preparation of the surface to be finished. Preparation is needed to eliminate large visible defects:

• we take a steel spatula and carefully cleaned the wall over the entire area. If the wall was whiten of lime, then first wash it with water;
• cooking a solution for plastering and fill it all deepening, including traces from nails;
• we give dry, and in the meantime we prepare newspapers or thin paper, then we stick this waste paper on the wall, smoothing carefully. We give paper to dry and gluify the surface, eliminating irregularities using sandpaper;
• the spots available on the wall are covered with nitroloma, which will exclude their manifestation through the fabric.

We work with a cloth

If the material is planned to glue to the top, then it is necessary to beat off the line under the ceiling. It's just done:

• the rope is rubbed by any pigment;
• stretches at the desired level;
• the line is littered, and then parallelism is checked with a level.

• we check it on the shrinkage, wet first a small segment, if after drying, it will decrease, then soak all the fabric, then we dry and stroke. This procedure is called decoction;
• next, we cut the cloth with stripes, the length of which is equal to the height of the wall, of course, while we leave the stock;
• we measure the length of the wall to be pasted and stepping among themselves the bands. As a result, a cloth addictive to the whole wall should turn out;
• smoothing the seams and turn the cloth into the roll;
• for further work, you need an assistant. Fracting glue, well, at least "bustilat" or caseinov, a wall from one edge to a width of centimeters 10;
• slightly deploy the cloth rolled into the roll and apply it to the end to the glue strip. Side, at the top and bottom there should be a small allowance. While you hold the roll, the assistant roller smoothes the glued area. On one glue, the fabric may not resist, so it is desirable to progress, having stuck on it a temporary rail, but the nails do not roll completely, the gap remains between the hat and the wall;
• we apply the same strip of glue on the upper limit of the wall. One member of the process of the roll unwinds, and the other sticks the cloth, pressing it with a roller. If the material is heavy, then again you feed the rail;
• we wait until the glue dry and continue: glue to the same technology first the remaining edge, and then the bottom. Tissue, while stretching well;
• after complete drying of the glue, we remove if they were used at all, rails. Nails remove very neat pliers;
• cut the allowance with a sharp blade;
• it remains only to arrange the edges by plinths, baguettes or moldings.

Important: In places where glue was applied, even the day after the fit, air bubbles may appear on the fabric. To eliminate the defect, pinched them with a needle, and then join the iron.

The above method has one minus: the cloth is attached difficult and if you need it to be wrapped, it is difficult to remove it, but the next way to fasten the tissue, the wash question is simplified.

Upholstery of wall cloth

Upholstery or as elsewhere called this method, tightness, akin to the installation of stretch ceilings, so I need a framework. It is purchased ready or manufactured from wooden planks or corners. Purchased frames are plastic and rubber.

Constructing a frame

For the construction of the frame, we will need:

• wooden planks 50-70 mm width 10 mm thick;
• nails or screws;
• screwdriver or hammer.

Frame assembly:

• if the wall is concrete or brick, then we drill holes in it for mounting slats;
• fresh all horizontal planks: at the ceiling, on the floor, above the doors and windows. The edges of the fabric will need to be hidden behind the straps, so 3 mm is needed under the ceiling and above the floor;
• mount the vertical strips starting from the angle at a distance of 0.5-0.6 m.

Upholstery

After making the frame, proceed to the upholstery:

• moving from the ceiling from the corner. Stitched and ironed fabric fasten up with a furniture stapler or nails. The minimum distance between the fastener is 50 mm, the maximum is 100 mm;
• for the pent, we leave centimeter 2-3;
• in the process, tissue tensioning with quite large effort;
• take a plumb and check the vertical of the panel;
• nail the web from the bottom, following the folds, the folds are not formed;
• we take a screwdriver and refuel the upper and lower edges under the bar.

If s wooden carcass I do not want to buy a finished profile - polyvinyl chloride. It is expensive and on it is usually fixed by polyester fabrics.

The most convenient way to fasten the fabric on the wall

The wash and cleaning of the fabric will help the fastening with the help of lipochki:

• we assign one tape on the wall;
• on the involvement of the panels also secure a sticky tape and we combine with the one that on the wall.

Ancient technology finishing with cloth

The decoration of the walls with a cloth whose technology was borrowed from the masters involved in the finish of the carriage, and called: Kareny. It does not just make the walls stylish and beautiful, and also makes noise insulating and insulate the room. So, we define right away: the material takes only dense and:

• on the surface of the wall glue noise and thermal insulation material;
• next, draw a sketch. It is necessary in order to determine how much material is required for upholstery and how much you need to make fasteners. The screeds themselves can be carved both from the same material that is used for tightness and highlight them by making contrast;
• on the cloth, observing accuracy, make the mark where we will beat the nails;
• fasten the top of the fabric;
• we put on the canvas fastening ties and fasten them with furniture nails;
• due to the fact that the bottom is soft material, the drawing will be convex. The stylistic completion of the design of the room will be attached to the same armchair and sofas.

Here you will clearly see the process of finishing walls with a cloth, whose video is a fragment from the popular TV show "Apartment question":

Decorating the walls with carpet and fabrics began many centuries ago. In the East and now the tradition is preserved instead of partitions to hang tapestry or painting the walls and paint them with gilding to imitate the expensive embroidered material.

Drapeting walls with cloth decorated palaces in Greece and Rome. Even when the first paper chopers appeared, the interior of the living room was luxuriously looked with daking in expensive fabrics. Wallpaper adhesive people with low incomes, to know and rich merchants preferred to drape the walls of the house with a cloth.

Wall finishing methods with a canvas

For a long time the upholstery of the walls with a cloth was expensive pleasure available to a little. Gradually, the quality of the fabric has changed, appeared relatively inexpensive textiles responsible modern requirements interior. Kirill interested the beautiful wall material suitable for any style and turning into the decor. Now my assistant wanted to know how to separate the wall with your own fabric. There are several fabric finishing technologies on the walls instead of wallpaper:

• Drapery.
• Wallpaper.
• Seamless salable under the rail.
• Finishing with frames and frames.

By analogy with the walls done stretch ceiling. Material must be prepared in size, create a pattern, wet and pull on the harvested frame, attach to the clamps around the perimeter and enclosed with moldings or ceiling plinth. Fabric finish for walls is better than paint:

• Luxurious and unique view of the interior.
• Suitable for any style.
• Enhances the sound absorbing effect of the walls.
• Keeps warm.
• Fast drapery replacement, you can wash.
• No need to level the walls and eliminate small defects.
• You can quickly enclose the room without a single junction.

Disadvantages There are, for example, a kitchen with its dampness and smells is not suitable to go off the absorbent smell of the material. In the dining area there is a facing, but it is desirable that it is skin or upholstery, impregnated with protective compositions. Fact and loose material delays dust on its surface, absorbs dirt and moisture.

Wall drape cloth (video)

Drapery - elegant walls of banquet halls

The design of soft falling waves is used in the halls for celebrations and banquets, in the living rooms, when preparing for the holiday. The photo shows a fabric decor that can be replaced quickly, step by step repeating simple actions With ready-made material. Fabric must be prepared:

1. Sew solid cloth, width more than a wall, as the decoration of the bank hanging waves.
2. Sew top and bottom, withstanding the height of the partition.
3. Starch and smooth out.
4. Secure on a bar or bamboo cornice.

The advantage of the method is that it is possible to quickly build walls, give the hall decorative and festive look. Then, in a short time, change the style and themes, place the room to the next celebration. The finish does not need to stick, it is enough to temporarily wave a soft drape material.

The advantage of drapery is able to quickly change the design, wash the fabric, to use any option for finishes, inexpensive creating a stylish and elegant look. We did not fit this option with Kirill because we do overhaul Residential buildings and apartments.

Watching strip strips

Instead paper wallpaper Fabric strips glued on the wall. The texture is chosen dense. The technology is partially different from the method of amusement with rolled finishing material. We had to stick the matter with a luxurious pattern in the living room with their own hands.

Before finishing, it is recommended to check a piece of fabric on the shrinkage. I prefer to soak all the fabric that takes on the finish. From it is washed out production dust, oil from equipment. At the same time, dissolve salt in the water, fixing the paint, makes brighter the colors of the fabric base, make the material of the non-flammable. Fabric texture is compacted. Now she best lies on the wall and attracts dust less. I had a large desktop, which was smoothed fabric before revealing. The strips are narrow, so they glued them as ordinary wallpapers.

1. Cut into pieces with a bunch in length. Checked matching pattern.
2. They smeared glue on the wall, and starting on top of the cloth.

The top edge can be fixed with cloves, then separated using lace or fringe.

Seamless salary and complexity of its execution

The height of the children's wall allowed to stick the fabric across. We did a seamless wall covering.

• Prepared fabric, I soaked her salt and smoothed well enough, turned into a roll face inside.
• From the angle smeared the surface of the wall with casein glue, paying special attention to the perimeter.

• Passed left end. Kirill unfolded the cloth and spread it, I stroked the hot iron, melting and fixing the glue.
• At the location of the switch cut the hole, oh when they reached the opening, tinned fabric in fact.

I am alone difficult to cover the walls and smooth them. We coped with the nephew quickly. But I already have experience, and several times rubbed the wall with a cloth in such a way.

Tightwork on and under the rail

The next one was the bedroom. We used a seamless method, fixing the wallpaper from the viscose fabric for the walls under the bar. The width of the panel allowed to close the entire wall. I prepared a fabric and with the help of a nephew raised it into a roll. Then we acted according to the instructions.

The order of action can be seen on the video.

1. Passed the left upper corner of the cloth with a nail.
2. With the help of Cyril pulled the cloth at the top of the outlined horizontal line and secured the right angle. The wall is long, so for convenience I scored a carnation and in the center to resilize less. On short spans, I usually do not.
3. Together we were closed, but convenient. I fled the fabric under the bar, Kirill twisted the screws. I made Paths in advance, at a distance of 15 cm. Moved in the habit from left to right.
4. Having finished up, switched down. They pulled and fixed the angles, then screwed the bar.
5. The angles were made simultaneously with the adjacent wall, consolidating with one plate 2 of the panels. It is not necessary to glue textile material, just to pull evenly.

To close the rail, you can stick a cloth border, put on moldings glue or decorate with braid, lace, paint. The idea of \u200b\u200bfinishing can be any. The main thing is to do neatly and in accordance with the interior style. At the scene of the socket and switch, I cut the cloth, made a 2-cm hole for a side and recorded around the perimeter as the same rack as all the cloth. In the office you need silence for work, so the fabric was fixed on the rail, they laid a thin layer of foam rubber.

1. They were placed in terms of the level and pinch and attached the camcas.
2. Then they began to cut and glue the porolon on the wall.
3. True started on top, by analogy of fastening under the rail.

You can glue in advance in the size of the frame from the rivers and sowed their cloth. The insulation substrate is inserted into the frame. The sheath is made unnoticed by carnations on the reverse side. The walls are mounted using glue ready-made sections. It remains to disguise the joints of the frame.

Tip! The framework of frame tightness is convenient if the other is often replaced by another. Or update in places where the surface is quickly wiping and smeared, for example, in the hallways and corridors.

Warming with foam rubber

Beautiful finish is obtained by creating a embossed surface. A substrate is installed on the frame. To fasten the thick layer of foam rubber. Everything is covered with a cloth. Matter is cut with a switch 10 - 15 cm. Fixed with a stapler from the back. Then on the convex surface on the markup, a fabor with a foam rubber is made, an exhaust is obtained. The fragmentary decoration perfectly decorates the walls in the headboard, zones soft corners in the living room.

The decoration of walls with a cloth can be made by four ways: tensioning the material, sticking, upholstery and the drapery of surfaces. Any of them improves sound insulation, allows you to hide the wall defects and helps to keep the heat indoors.

It is advisable to use any tissue as a finishing material for the walls, but it is desirable that it be sufficiently dense. Synthetic fabrics have proven well - durable, easy to work and do not require special care.

Another possible option is the fabrics used for furniture upholstery. They are durable, resistant to mechanical damage, moisture resistant. For drapets, a lightweight material will be needed.

Select the material and the method of finishing, after examining the photo different interiors Using this reception.

It is important to remember that if indoors increased humidity, such a way to finish the walls will not fit.

Fabric pulling

Technology finishing wall cloth is pretty simple.
Read:

• wooden rails;
• dowels and selflessness;
• building level (hydroelect);
• nails and hammer;
• roulette, pencil;
• screwdriver.

A free space is formed between the wall and stretched textiles, equal to the height of the used rail. If necessary, this air pocket can be laid insulation or noise insulating material. For fixing the material, special glue is used, the joints are carefully close so that he does not learn on the fabric.

When choosing a material, the properties of textiles are taken into account - the insulation of the same color is chosen for light, the dark will be shining.

Progress

On the entire perimeter of the premises of the drawing installation lines, using pencil, roulette and construction level. The lines must be located at the same height from the floor and the ceiling, while the distance between them should also be maintained so that the fixed tissue is stretched evenly, there was no distortion.

Wooden rails are fixed with dowels and screws on the marked line.

For further action, two pairs of hands will be required. The cloth must be pulled evenly and strong enough. In places of fastening on the rails, it is seized twice to prevent the appearance of breaks. It is naked with small carnations, under each predetermine a piece of skin. Other possible method Fixation - on furniture brackets.

At the final stage, the places of fastening textiles to the raids are closed by plinth or decorative planks.

Sticking fabric

Sticking is the most popular, but a rather laborious process.

Surface preparation

Before you begin to finish the walls with your own fabric, you must prepare the surface.

This will require:

• putty knife;
• plaster;
• paper or newspaper;
• sandpaper;
• nitrolac (for spots on the walls, if any).

Operating procedure:

1. With the spatula, the wall surface is cleaned.
2. All irregularities and recesses close the plaster mortar. Waiting until he is dry.
3. The entire surface of the wall is sealed with paper or newspapers. When glue dries, the wall is grinning using sandpaper.
4. If, after all these operations on the wall, stains remained, they are treated with nitroloma so that they do not appear on the tissue.

Preparation of fabric

Unlike wallpaper, textiles glued on the wall not cut off, but a solid web. It is advisable to choose the widest possible cut so that the connections are as small as possible. If there is no such possibility, then the wall is measured, the strips of the material are stitching, leaving the stock from above and below. The seams are ironed from the wrong side, the finished cut is folded into the roll.

The material is tested for shrinkage - a small flap is measured, immersed in water, and then dried. Measure again, and if the dimensions have decreased, then the whole cutout prepared for work is soaked, dried and stroke.

Operating procedure

Furniture glue can be applied immediately to the entire surface of the wall, other adhesive compositions are applied with intervals, into separate sections so that it does not have time to dry.

Work starts from the top segment of the wall. The cloth is applied and stretched. For this operation, 2 people will be required - one will hold the roll, the second to glue the finishing material and thoroughly smoothed it with a roller so that it will be evenly and tight.

The fabric is temporarily fixed with small carnations. Aligned and simultaneously fix with a stroke iron, leading down the device from top to bottom. When heated glue will stick, securely fixing textiles on the wall. To try the entire surface of the wall is required several times so that there are no missed areas.

When the work is over, the surplus of the canvas on the ceiling and near the floor are neatly cut off, trying to make the edge of the material. Separations are additionally missed by glue.

The process of complete pouring of glue takes about 3 days. After this period, the fabric is carefully examined if air bubbles are visible on the surface, they are neatly pierced and stroke the iron.

Final stage - Registration of edges with molding, plinth or baguette.

Drapery

Drapeting wall cloth will require an assistant attraction.

For decoration it will take a large web, the width of which is significantly more than the perimeter of the room - it is necessary to create folds.

The work does not imply fixate the fabric over the entire wall surface, most often textiles are fixed on the bar located at the ceiling, and below it freely floats.

Materials and tools that will be required for drapery:

Preparation of walls

Before drapeting the wall textiles, the wall surface is cleaned with a spatula, wipe with a damp cloth to remove dust. Large and small cracks close up by plaster. After drying, the solution is passed on the surface of sandpaper, then dust remove again.

Preparation of fabric

So that the material lay down with even the same folds around the perimeter of the room, you need to prepare it. It is easiest to outline the folds using a pin, and then flash the cloth over the entire length of the upper edge. In this case, it turns out ready for the work of the canvas with the folds already executed. To form them at the stage of feeding the fabric to the wall is much more complicated, and the end result may not satisfy.

Operating procedure

Using the level, spend all over the perimeter of the room with a line on which the rail will be installed.

The cloth is cooled along the edge, fixed on the intended line with the help of carnations. On top of the attached textile with the help of screws and the screwdriver, rails are fixed. Fasteners are not further 30 cm from each other.

After installing the rails around the perimeter, the room is moving to the tissue fixation from the bottom. To understand all the subtleties of work, it is recommended to watch the video on which the process is filled in detail.

Upholstery

To hide the wall with a cloth with a carriage tie, you will need to first install a special framework. It will be difficult to cope with the task on your own, but if desired, it can be done.

For upholstery, it will take a dense and durable fabric, transmitting air and resistant to sunlight.

It will also be necessary to create a sketch with which you can calculate the amount of material and fasteners. The width of the cut must be greater than the height of the wall (about 10 cm). The screed can be made in the form of squares or rhombuses, a particular drawing is achieved by the location of the mounting strips (vertically or diagonally).

The fastener itself can be made of the same fabric as the upholstery, and may be contrasting.

Operating procedure:

1. The surface of the wall is covered with heat and noise insulation. From the thickness of the layer will depend on the degree of relief of the finished finish - the greater the layer, the more effectively the walls will look like.
2. Textile material is placed along the entire length (they make markers in which the fabric will be fixed with nails to the wall). You can not allow errors when working - each puncture will be noticeable, it cannot be removed.
3. For work use assistants. The top edge of the canvas is glued along the ceiling. In marked places, nails are driven, acting from top to bottom, placing material evenly, tracking so that there is no distortion.

Upholstery or wamp of wall cloth - a spectacular way of finishing the room. With this method, it is easy to disguise the flaws of walls and communications. However, it is necessary to remember that the textile surface accumulates a large number of Dust, so it is necessary to regularly care for it: vacuuming and timely remove stains.

More and more often modern designers Returning to the old days of inspiration - you see, previously knew how to build and repair for centuries. Moreover, all vintage technologies are distinguished by exquisite taste and simplicity. This is so possible to characterize the fabric. This technology, and more or rather, the three ways of wall decor, we will analyze in this article. Together with the site, we will examine the question in detail how the upholstery of the walls of the cloth with their own hands and learn all the subtleties of this process.

In principle, the drapery of the walls can be performed in three ways - they are all pretty simple and accessible to everyone. Believe me, this process, despite the seeming complexity, is much easier than the walls of the walls by wallpaper.

Upholstery of wall cloth with her hands photo

Wall Drapery: Fashion Method - Testing Fabric Under Rake

This way of decor wall cloth can be called the most difficult. The fact is that on large squares Alone is difficult to implement it, although if desired it is possible.

Woven fabric, the dimensions of which are 10-15 cm more than the size of the wall, fixed with the help of carnations or small dowels first in the same upper corner, and then in the other - at this stage of the work it is necessary to pull the top cut of the tissue to the maximum. After that, a decorative rail is stuffed over the tissue. Here you have to show all your efforts and patience - you must simultaneously and put the rail, and pull the canvas.

Drapery wall cloth photo

You need to start from one of the corners and consistently move to the side - the fasten is better installed every 15-20 cm. As a fastener, you will have to choose either decorative hats, or use ordinary, but install them in sweating, which you can subsequently disguise with decorative caps. If the edge of the wall crawls, then the carnation, pre-locking fabric, will have to be removed - it is possible to take care in advance, before installing the last piece of decorative rail (you can hardly get a rake in the whole wall).

So, with the top figured out, now it's time to switch to the bottom of the wall. Almost all the same here. First, we stretch one of the lower edges, then the second and, like last time, we set the decorative bar and simultaneously stretch the fabric. Similarly, the sides of the woven canvas are also attached.

In all of this case there is one very important momentRegarding the installation of a decorative rail - if you want the walls of the walls with a cloth a hundred percent, you will have to take care of the correctness of the corners. They need to be cut in advance before the start of work. In principle, it is even possible to prepare all the fasteners and drill holes under them not only in the rail, but also in the wall - then you will only learn to pull the canvas and roll the rail.

Wall decoration with your own fabric

Wall Casing Tissue: Method Second - Testing Fabric on Rake

This method of decorating the walls with a cloth is much easier - it consists in the fact that around the perimeter of the wall first the rake is stuffed, and only then the fabric is attached to the rail. This method has one advantage - thanks to a packed rail, it is possible to perform insulation and the wallsching of the wall. Full insulation for such a wall, of course, do not launch, but you can use a thin foam or felt.

Crowing wall cloth with your own hands

In principle, the entire process of tensioning the fabric looks in the same way as in the first way, only as a fastening is used either nails with decorative hats (in this case, the edges of the fabric will have to bend), or furniture brackets. The second way to mount the fabric is easier and faster. Subsequently, the place of attachment is overlapped with decorative planks.

The wall decoration with a cloth in the second way is carried out in the following sequence. Starting from any upper angle, the fabric is simultaneously stretched and nailed to the rake first under the ceiling, then above the floor and only after that from the edges of the walls. It should be closely monitoring the tension of the web so that the folds are not formed.

Decoration wall cloth with your own hands photo

Cast Upholster Fabric: Third Method - Sticking

In principle, in this way you can stick almost any tissue. To decorate the walls in this way the partner will need, which will hold the naughty cloth. A sharp knife and a powerful iron of an old sample can be useful from the tools. Of the additional materials - exclusively furnace glue, frozen when exposed to high temperature.

As in the previous cases, the design of the walls with a fabric method of its sticking begins on top. Furniture glue without temperature exposure freezes for a long time, so you can safely spread the whole wall at once and do not worry about anything. For convenience in the work of one angle of woven canvas, from which all the work begins, can be fixed with a small carnation. While the partner holds the cloth under the ceiling, you calmly smooth it with an iron - the glue is absorbed into the upper layer of the waterfront of the fabric, gluing it in this way to the wall. So that the upper edge of the fabric does not fall apart, it is better to immediately warm the band with a half-meter width.

Wall decor fabric photo

Having reached the opposite edge of the wall, the partner can free and entrust the fabric trimming. Hand in the hands of a flat metal ruler and a sharp construction knife - putting a line into the angle between the ceiling and the wall, it is quick and easy, and most importantly, smoothly, remove the surplus of the fabric. Similarly, the fabric is cut and near the ceiling baguettes.

While the partner is underway with the trimming of the canvas, we continue the interrupted fabric sticking process. We are moving in the same way as under the top - we take a strip of half a meter wide and, gradually warming it, we reach the opposite edge of the wall.

How to stick the fabric on the walls do it yourself

That's the strip behind the strip, all woven fabric passes. In the process of work, special attention should be paid to the following points.

1. First, in the process of covers the walls, it should not be pulled by a cloth - it should lie on the walls naturally. The fact is that even after warming up the glue remains plastic and the fabric can shift to the side, resulting in folds.
2. Secondly, the edges. Oh neither twist, and the cutting edge can be fruited during operation. It is only one way prevents - on the perimeter of the wall, it is necessary to apply glue slightly more than everywhere. It is deeply absorbed into the fabric and after frozen prevents the rapter of the edges.
3. Thirdly, closely follow the uniformity of gluing. Sometimes air can remain under the cloth, which does not allow the canvas to stick in this place. At the end of the work, the wall must be carefully examined on the subject of bubbles that have arisen and, if necessary, remove them - a couple of punctures of a thin needle and re-stroking the iron solve this problem the best way. By the way, such bubbles may arise the next day - there is nothing terrible in it. The glue dries completely for three days, during which it can be reheated and eliminated all the flaws of the work. After this time, such an opportunity disappears - heat the glue will already be impossible.

This is how the upholstery of the walls of the cloth with their own hands. It is difficult or not very, judging only to you. Yes, and the way to finish is also likely to do. I will say honestly, I personally like the last way. But, unfortunately, it has one drawback - when the fabric on the walls you get tired, the woven canvas is quite difficult to remove. Even if you quickly cope with this work, you will additionally need to spend a lot of time and effort to bring the walls in order.