The procedure for parsing door handles is simple and does not require a wizard call. Before removing the door handle yourself, it is necessary to determine the type of mechanism, and then familiarize yourself with the simple instruction.

Common Types of Door Handles

Pens - the most sought-after element for equipping outdoor and interroom doors. World manufacturers offer a colossal variety of fittings for all sizes and configurations that combine only the type of fasteners and locks.

Main types of products:

• stationary;
• round with a socket;
• push;
• round knob knobs;
• with magnetic lock.

Causes of dismantling door mechanisms

Door handles are subjected to mechanical loads. Therefore, despite the strength promised by manufacturers, accessories quickly fail and needs to be dismantled for subsequent replacement.

This is necessary to bring different situations:

• The breakdown is often with the most unforeseen circumstances when accidentally jammed the lock or the outer knob of the entrance door.
• Repair - with a radical change of the interior, the door fittings is very striking.
• The loss of appearance - the presence of scratches, scuffs and a tear coating spoil the view of the room as a whole.

Detailed description and manual

To learn how to disassemble the door handle, you will not need much time. A simple procedure can be performed independently. The specificity of the process depends on the type of construction.

Stationary handles

Represents the planks of various configurations: round, square, in the form of figures or brackets. Combines their elementary mount on the door canvase with screws.

Stationary handles are sometimes mounted on both sides of the door on a single rod. It is easy to check by fixing the accessories on one side and turning the second fragment on the other. The back side handle should scroll.

To know how to disassemble the door handle, fit on self-drawing, no special knowledge is required. You just need:

1. A screwdriver unscrew the screws from the very base of the handle or from the plank on which it holds (depends on the type of fittings).
2. Handle carefully remove.

If the handle is attached on a single axial rod:

1. Unscrew a gently fragment of the fittings on one side of the door.
2. Then remove the design on the reverse side.

Door handle Round with a power outlet

main feature Such handles are a rotary decorative element and no holes for a screwdriver or key. Dismantle such round handle Need, starting with the removal of the upper element of the decoration.

The procedure requires attention and caution: the elements of the mechanism are often fragile and can easily burst.

The dismissal process is quite simple:

1. Decorative elements are required to divide. For this you need to keep the base of the handle.
2. Turn over the top and carefully remove the rosette from the thread.
3. Now you can see the opened elements of the mechanism inside the handle and proceed to remove them.

Often such door mechanisms are attached on the usual common rod, which is easily removed, and the handle can be removed.

Pressure handle

A common model is characterized by ease of installation and ease of use. Suitable for any type of doors from internal to external. Contains two elements of accessories, which are fixed on a single axial rod. Accompanied by mechanical castle With a tongue that snapped when the door is closed. Pressing the door opening knob drives the lock mechanism.

During the parsing of the mechanism, remember the process to then quickly collect all the items in the reverse order.

It is easy to figure out how to remove the handle with the door:

1. Screws holding a lining, unscrewed with a screwdriver. Remove the invoice.
2. A standard four-mounted axial element will open. In some configurations, the axis is connected to the rod fitting, which is easily removed.
3. The remaining part of the handle is unscrewed.
4. Remove the pad from the second fragment on the reverse side of the door.
5. Carefully remove the second fragment.

Handle-Knob.

The knob-knob is a common view of the accessories, installed on the interior doors and is a round lever with a lock in the center. Such mechanisms are installed on interroom doors or in bathrooms. The main feature is the moving part of the spherical form. It consists of two mirror elements, one of which opens with the key, the fixing button is located on the second.

To disassemble a door knob, you will need flat and cross screwdrivers, depending on the type of fastening.

The process of parsing looks like this:

1. The first thing to be done is to pose the edge of the lining, which is stuffing the door handle, flat screwdriver.
2. The key or any thin object is to click on the opened stopper. The handle is simultaneously pulled out, then carefully pull out and leave to hang out.
3. In the empty connector that appears on the place of the handle, unscrew several opened screws, and then you can remove both parts of the fittings.
4. Now you can unscrew the screws on which it keeps door lock. Door handle removed completely.

Purpose handle equipped with a magnetic lock

A simple magnetic lock is called passive, consists of mechanical elements and is used in interior doors. The design is completely recessed in the canvas, silent to use. Such a castle is perfect for bedrooms and children's rooms.

The mechanism is reliable and durable, but sooner or later it is capable of failure and will require dismantling. Under the power of a magnet can jam or skew the latch from time or long-term coarse use.

To dismantle the handle with a magnetic type lock, you will need the smallest hexagon, a flat or cross screwdriver and a sharp thin object.

The process is not very different from the parsing of the usual push handle for the door:

1. The bar around the rolling part of the handle is fixed. In the lower part it is located a small connector under the hexagon, with which the base should be unscrewed and leave to sign.
2. In the movable part of the handle, the second connector with small thread is usually located. Using the hexagon, unscrew the handle and remove.
3. A single rod axis will open to which the second part of the fittings on the back of the door is attached. Repeat the same manipulation with the second door handle.
4. The main mount is kept on bolts to be removed. After that, the elements of the fittings are easily removed.
5. After removing the handles, the magnetic lock is easily unscrewed from the door with a screwdriver and removed.

The magnetic handle may look a little non-standard. In this case, you need to act on the same principle: find the screws and unscrew them.

A more clearly dismantling process (on the example of a push handle) can be viewed on the video.

Any owner will be useful to know how to disassemble the handle on the door, especially interior. This accessure is subject to a serious test of all residents, so someday it will fail, and it will be needed to replace another. In this case, you will not need to call specialists, you can cope on your own, saving at the same time on the wage of the employee. Especially since this case does not require great skills, but only a few skills. The dismantling process may differ depending on the type of handle, but the whole process should not cause special difficulties.

How to remove the handle with interior door? Before proceeding to the analysis of the mechanism, you need to figure out what kind of classification it applies. The division occurs in several criteria. The described below is suitable precisely to parse the handle, because it has a classification according to constructive features.

Varieties of handles

Pressure. Such a handle is attached on both sides of the door web and has a M-shaped form. Opening occurs due to the load on the handle, after which the tongue is driven. The disadvantage of this accessory is that it is very effortful.

Swivel. The opening method is the same as the pressure, only the tongue is driven by not by pressing the handle, but its turn. Such models are often not very comfortable, because to scroll it, your hands need to be dry, otherwise they will slip. When replacing them, there is a reasonable question about how to unscrew the interior door handle.

Stationary. This handle has no latch. It is attached by self-drawing directly to the door of the door. It happens one or two-way, while the axial connecting element has.

Reasons for pars

Disassemble any of the models of door handles is not so difficult, because they have a similar design.

At the same time, the analysis of this accessure is required extremely rarely. What causes can cause it? How to remove the handle with the interior door?

The first reason is a breakdown. She meets most often. Often, Chinese models are susceptible to breakdowns that are not designed for permanent and coarse load. If the prevention of certain elements is not observed, the accessories come into disrepair. It should be repaired, and sometimes to replace the element entirely.

Next reason is the need to replace. Every year the market is updated with new and improved models. At the same time you can pick up color gamutsuitable for the interior, or put a new, more functional and reliable model.

Repair indoors often implies change style. Do not take care of the attention and door handles. Therefore, it often raises the question of how to disassemble the door handle.

Another reason is spoiled appearance. If the item is made of low-quality material, threads and scratches will be visible on it very soon, which negatively affects the entire interior.

Remove the pressure handle

How to remove the handle from the interior door of the push type? This mechanism is more complicated for disassembly, because in its design there is an axis rod, due to which the handle holds. It is delayed by a tetrahedron.

The process of parsing the handle must be started with removal of the plugs around it. They are attached to self-drawing or tightly pressed. They are very simply removed using a minus screwdriver.

On the one hand do the door you need to unscrew the accessories and extract. Then the second part is removed on which the axis rod remains.

If the handle is with that it is also extracted.

Compliance with the sequence and accuracy will remove the mechanism without problems without damaging the details and without creating unnecessary trouble.

How to remove the handle with the interior door swivel with a socket?

When in fittings swivel type No side of the hole in which you can insert a key or screwdriver, then the items are separated manually. Both parts of the handle should be scrolled in different directions and gradually remove from the thread. One of them will be axial rod.

Similarly, the socket is removed and cogs are unscrewed. When the axis is removed, you can do the following elements - latch or lock, if there is such a need. When decorative parts are removed, you need to follow the use of your strength, because overlooking it, you can damage the elements.

Remove the swivel handle

The knob with the lock for the interior door of the rotary type is removed as follows.

This will require a key to clamp the spring mechanism. Often it is not included in the packaging with the product, but it can easily replace a nail or other thin object.

First of all, you need to remove decorative plates that can be simply posed with a sharp object.

To push the sightlened pin with a key or nail, inserting the tool into the process hole located on the side. Together with this pull the handle and remove it along with the cap.

After you need to push the mounting screws located on the plate. Then two parts of the handle fall to the removal with the axis.

Collect back handles for doors round will not be difficult, only all actions must be done in the reverse order. First comes which is fixed with the plate, then the axis is inserted, the fasteners are put on it. Decorative inserts are mounted last. The main thing is not to forget that first the decorative flange is like, and then the main part of the handle is attached.

Remove the stationary handle

How to disassemble a stationary door handle? They are less common to break or deform. This is due to the lack of moving elements in it. Often the door handles of this type after removal are not repaired, but change the entire one. The removal process occurs as follows:

1. Screwdriver unscrews unscrew.
2. One part is unscrewed from the rod, and the second is removed with it.

This design may not have a central rod, it is much reduced process. It will only be necessary to select the desired screwdriver to unscrew the screws of a certain diameter.

Remove the handle with the latch

First of all, when the handle latch is dismantled for interior doors with an automatic retainer, you must remove the screws with a screwdriver. Next, discover the overhead items. Using unscrewed the rod.

After that, pull out the swivel mechanism, wrapped with a spring.

Popular way

There are several ways that the handle latch is removed for the interior door of the circular shape with the retainer. Here is the most popular of them.

You need to remove with a screwdriver, first from the part where the device is located. On the opening stop, it is necessary to press and at the same time pull the handle to yourself.

Then the retainer is pulled out, for which screws are unscrewed, after the latch is released.

Thus, to disassemble any door handle with your own hands does not make great difficulties.

Breaking door knob Interior doors are two types. Most often, when you click on the handle, it simply scrolls, the door latch does not respond in any way and does not open the door. Rightly inside the spring breaks, the handle saves and no longer returns to a horizontal position.

Whatever the options you encounter, to solve the problem, the door handle must first be disassembled and removed. The sequence of work depends on the design and features of the device of a particular model. Therefore, before you start a description of the technology of removal and disassembling the handles, let's look at what parts it consists.

Design door knob

The photo below shows the design of the simplest door handle.

The first is the pen herself (in our case pressure). A plastic ring is attached to it, which provides a dense adjacent of the handle to the base. It is also called the "socket", a decorative flange or plank. Inside it is a return spring, ensuring the stability of the horizontal position of the handle.

The following two elements are a stroke limiter and a locking ring. Their task is to prevent scrolling the handle on the required trajectory. All of these components are consistently located on the rod (in the image - square) and fixed with a locking screw. The rod in turn is inserted into the locking mechanism and leads the latch.

The next photo shows the disassembly handle on the outlet with a slightly more complex design of some details.

Having understood with the names and purpose of each of the elements, we turn to the sequence of removing the handle from the door and its disassembly.

Step-by-step instructions for work

1. First of all, remove the handle (designated in the photo above). It is attached to the rod by a locking screw, or, in the simplest case, is fixed with a spring-loaded locking pin. The screw is unscrewed by a screwdriver or hexagon, depending on the shape of the groove on it. If we are dealing with a spring-loaded pin, then it needs to be pressed into the nail and effort to pull the door handle.
2. Having removed the handle, we get access to the outlet. If the fastening screws can be seen on the outlet, then you will be able to immediately remove it from the rod. But more often on top of fasteners there will be a special pad (a decorative flange - in the photo above is signed as a socket). In the place of fitting to the door, she will have a groove for which it can be pushed with a screwdriver and remove. Perhaps the pad must simply scroll counterclockwise if it holds on the thread. Removing a decorative lining We get access to the fastening screws fixing the socket itself. Since access to them is open and nothing bothers nothing, they will be easily unscrewed with a screwdriver.

It happens that the outlet, as well as the handle in other structures, has a hole in the end: there is a springtime pin in the recess. In this case, to remove the socket, you need to press it on it, while simultaneously tightening the rosette from the rod. If you have found the hole, but there is no pin in it - it means that when installing the handle, the rosette was tested around their axis and the pin is somewhere else. You can find it smoothly turning the rosette with a nail inserted into the recess until the nail is stored in the pin.

After disassembling the handle in the proposed sequence, you can determine the exact design of your model. And on the basis of its features, draw conclusions that it was the cause of the breakage and how to eliminate it.

Types of handles for interior doors

Door handles sell two types: "Knob" and "on the outlet". The knob's handle is usually hollow and easy, and on the outlet is made of more massive materials and is usually incomplete inside. The first design over time, with the wear of the spring mechanism, can start hanging out or cross. The second will last longer and will be more comfortable in operation. Accordingly, their prices differ: the most budget options - These are knob sticks.

Shaped handle shared on swearing and pressure. Pressure has a classic handle shape: when you press the door latch hides in the lock case and the door opens. A swivel handle has a ball shape, which allows you to make it less noticeable. In addition to the difference in design, these two designs differ non-obvious at first glance.

Rotary handle is more compact: it is more difficult to accidentally hurt passing by the door. And if it happens, it will not be so painful as with a push handle. At the same time, it is very uncomfortable with hands in the shape of a ball every day, the hands are very uncomfortable from the cream's hands - the hands are slipped. So, with regular use on the doors in the kitchen or in the bathroom, the push handle will create less difficulties.

Each owner can not know how to disassemble the door handle on the interior door. This element is subjected to every day exposed by the tenants of the house, and not always with the handle cost carefully, and therefore sooner or later it can break or you just want to change it to a new model. In this case, so as not to call the wizard, you can do everything with your own hands. In addition, to independently disassemble and assemble the door handle is not so difficult.

Different types of door handles are disassembled in different ways.

Types of handles

Before you begin work, you need to decide on the type of fittings. All door handles can be divided into several groups. This classification is perhaps the determining factor when disassembling the design. So, let's look at:

• Stationary.Not related in any way with the lock and latch. It serves solely to move the door leaf. Fastened to simple screws or screws. It may be one-sided and double-sided, connected axial element.
• Pressure.It usually has the form of a M-shaped design with a fastening on both sides of the canvas. When the load is submitted to the handle, it leads to the movement of the faleva and allows pressure to open the door.
• Swivel.The principle of operation is the same as the pressure model, but it is necessary to turn the handle, most often such models have a view of a ball or buttons.

The main types of handles for interroom doors

Because of its shape, the pressure model has a certain disadvantage: it is easy to hit it easily. The minus of the swivel samples is that the person's hand can slip over its surface, which makes it difficult to open the door.

Also distinguish models with a decorative flange and on the outlet. What are their main differences? When using a socket, you do not need to drill a huge hole in the door. In addition, such a handle is full and heavy. But the decorative linings are usually large in diameter and are installed on the light hollow nobody with a lock or latch. Both options deserve attention.

Why disassemble the handle

Since the specified models of door handles are presented quite simply and according to a similar principle, each person can do without any problems to do it. But the disassembly and assembly of the handles is not a routine process, the need for this does not always occur. What can lead to such a need?

• Breaking.This is one of the most frequent reasonsThis is especially true of cheap Chinese products. Over time or due to rough circulation and ignoring prevention measures, the mechanism is wearing and some of its parts fail, so it is necessary to carry out timely repair of accessories.
• Replacing an outdated model.Every year, new models of products and old samples come to the market. It makes sense to replace more than perfect in the technical and aesthetic plan.
• Repairs.When repairing in the house, the interior is most often changed dramatically in the style of the door, so the old door for the door may be inappropriate and then it needs to be disassembled and replaced.
• Waste.The lower the quality decorative coatingMoreover, such a pen will come to unsuitability due to the appearance on its surface of scuffs, cutting paints or chips. Such accessories is better replaced if you do not want to spoil the overall impression of the room.

During long-term operation, the handle mechanism often fails

Pressure

The most popular model of the handle for interior door is push. In order to disassemble this type of product, it is necessary to take one only screwdriver. To start, unscrew the handle itself, that is, the pressure element. From the side or from the bottom of such models there is a slight recess with the hidden screw, it needs to be unscrewed with a screwdriver and then remove the element from the axis. In some cases, instead of a screwdriver, you may need a hex key.

After that, remove the decorative lining that masks the main mount, in most models it has a thread, so it is necessary to turn it out several times. Twisted screws. Carefully unscrew them and pull the design on yourself, holding the handle on the other hand, you can now remove it with the rotary axial element.

If you need to disassemble a latch or lock, the actions are carried out in the same manner, but in addition you need to unscrew the plate from the end of the canvas and extract the mechanism installed in it.

Purpose door handle

Round with socket

Now let's look at how to disassemble a round door handle. The principle of work is very similar, but the main difference lies in the method of removing the decorative rotary part. If the side of the handle does not turn a turnkey hole or a screwdriver, then you need to manually disconnect the items. To do this, keep the handle on one side of the door, and turn it out the second part and remove it from the thread, you may need to just pull it on yourself.

After that, remove the socket in the same way and unscrew the screws. Remove the axis and proceed to other elements: lock or latch, if there is a need. When removing decorative parts, it is important not to overdo it so that some elements of the mechanism do not burst.

Round door handle with socket

Noby

In order to disassemble a round knob of the Nob, you will need an additionally special key to hold the spring mechanism.

The key included in the kit may not approach in length, in this case it can be replaced with a nail or other thin object.

First, remove the decorative top of the top. Using the key or nail, slide the spring-loaded pin, leaking the tool into the process hole on the side, simultaneously pull the handle and remove it along with the cap. After that, you need to push the latch of the decorative flange and also remove it. Then unscrew the mounting screws on the plate. Now you can fully disassemble the handle and remove both of it with the axis.

As you can see, nothing is complicated. In order to assemble the handle, it is necessary to produce all manipulations in the reverse order: the lock is first installed and the plate is fixed, then the axis is inserted and the fastening elements are put on and only then decorative parts are collected. Do not forget that at first it is necessary to turn a decorative flange, and after it is already putting on the pressure itself or the turning part.

Almost all interior doors are equipped with accessories in the form of a handle with both locks and without them. Due to the fact that their use is occurring regularly, accessories quickly wear out and is subject to mechanical damage, which can occur. Before calling the wizard and make a replacement, you should disassemble the handle of the interior door and try to eliminate the fault with your own hands. Depending on the type of handles of interior doors, this process may differ, but there should be no special difficulties.

Types of door handles

To understand how to remove the handle of the interior door, first of all, it should be declared as it type. This data will depend on this data. required tool And the process itself, how to disassemble it. All handles for interior doors can be divided into 3 types:

1. Pressure - the mechanism is arranged in such a way that when pressed on the handle, the tongue hides inside the canvas and thereby allows you to open the door.
2. Rotary - the device of this type of accessories is similar to a push view, but instead of pressing the knob, its turn is performed.
3. Stationary - this type of fittings does not have internal mechanisms and serves more decorative element, installed on interior doors of those rooms that are not closed.

The overall mechanics for extracting accessories from the canvas, as a rule, coincides, since the routing process is not much different. But due to the difference in the device of the internal mechanism, it is possible to disassemble the handles in different ways.

How to disassemble a push handle

The pressure mechanism belongs to the most difficult, and its dismantling may require a little longer than the analogues. It is caused by the fact that the whole design is fixed due to a single axial rod and additionally tightened with a tetrahedron. In the photo it can be seen in which location takes place. To remove the door handle of the interior door with such a mechanism, you need to statenly perform the following actions:

1. The whole process of removing the plugs around the handle begins. Depending on the species, they can be fixed with self-tapping screw or simply tightly bent. In any of the cases with a screwdriver, the plate is easily removed.
2. With the help of a tetrahedron, you need to weaken the mounting of the rod, which fits the mechanism tightly.
3. Accessories on one side is unscrewed from the axis and is removed.
4. The second part of the door handle is removed along with the retaining rod.
5. If a lock is provided in the door accessory, this mechanism is also extracted from the web.

If you fulfill all actions consistently and carefully, then remove and disassemble the pressure handle with your own hands it will be easy.

What you need to remove swivel knobs

Rotary handles or nobody (KNOD), as in the photo, remove consistently, observing a number of uncomplicated rules. The whole process is as follows:

• First of all, decorative plates are removed from both sides. For this, they are enough to make something flat.
• After the protective element is removed, the deaf side is unscrewed from the canvas and axial rod. To do this, with the help of the key, you need to constantly hold the nob, so that it does not let go of the mechanism.
• After performing these actions, it is possible to easily remove all the fittings, thereby freeing the mechanism.
• In the last stage, the mechanism is removed.

After all the details of the door handle and the lock are extracted, you can start troubleshooting and repairing accessories.

In which cases you need to remove stationary handles

Stationary handles are less likely to be breakdown, as a rule, they are most durable due to the lack of moving parts. Usually the repair of the door handles of interior doors of the stationary species is not required, and they are subject to replacement after removal. The whole process is built as follows:

• with a screwdriver, screws are unscrewed;
• the head is unscrewed from the retaining rod on one side;
• pull out the parallel side along with the rod.

If the design does not have a central rod, the process is greatly simplified, and it is only required to unscrew the screws. For all work there will be a screwdriver with a cross section depending on the size of the screws of the self-press.

How to repair the handle of the interroom door

Depending on the complexity of the breakdown in some cases, it is possible to repair the handles on their own. To repair, the handle first needs to be removed from the canvas. Depending on which item that stopped functioning, the entire design with the lock is subject to dismantling, or its separate parts. After the fittings managed to remove, if necessary, you need to disassemble the mechanism to eliminate problems in it. Sometimes it is not required, and enough will only slightly fix the attachments and lubricate all the rotary elements. How to repair the handle of the interior door with the mechanical part with your own hands, you can see more detail on the video.

If you fail to adjust the interior door handle and bring it into a working condition, it will be best to purchase similar accessories. The canvas and the box are already appropriately processed under the mechanisms of a particular type, and the installation of a new element will not be difficult.