24.01.2015 2710

And then the moment came when you decided to make repairs in your cozy nest with your own hands. I want to make a beautiful and unique interior of your home and for this construction industry offers many materials for wall decoration. The finishing technology will depend on the material you choose.

The so-called "vinyl" models are the most popular among the owners of housing and hired masters. Vinyl products are distinguished between themselves with a paper and fliesline base. We will talk about the second form. Fliseline is applied in construction not so long ago, more often can be heard about its use in the textile industry. It is necessary for a more dense and strong structure, for this purpose also applies in building materials.

Vinyl wallpaper themselves are divided into four main groups:

Smooth, or dense vinyl (very sensitive, it is better not to apply on the surfaces of the premises where there are animals and children);

Solid vinyl (it is enough the new kind Wallpaper combines air permeability and durability, will be relevant in the hallways and in the kitchens);

Foamed vinyl (mainly used under the color, there are very interesting instances to create unusual design. Withstands two or three staining - this is the maximum amount, then the surface is simply coming into disrepair due to its appearance (failure and damage). Not profitable in the part, in addition to wallpaper, you still need to buy paint).

Vinyl wallpapers Fliseline based durable and durable. In any room your home they will look great. Convenient in everyday life, separate species will rather wipe with a wet sponge or clean with a vacuum cleaner and they already have an initial look.

The advantages of vinyl wallpapers on the phlizelin substrate

1. Have a solid foundation. What makes it possible to stick the wallpaper on the surface having small defects in the form of furrow and cracked plaster.

2. You can save a completely any type of surface. Even if the wall is uneven, the wallpaper is perfectly held and hide the wall defects.

3. It is very convenient to operate, which makes it possible to use, depending on the type and invoice, to repair the premises of various use.

4. Large assortment in structure and colors. You can order models with photos, patterns, appliqués.

Disadvantages of vinyl wallpapers on the phlizelin substrate.

1. Between furniture and wallpaper it is better to leave the gap, because they may be damaged. If you have children and pets, the duration of "life" is reduced.

2. Basically, all types of wallpaper have airproof, but varieties with micropores appeared. If the wallpaper do not let the air, there is a big risk of development on the surface of the walls of the fungus. It is recommended to process walls with special antifungal agents before the sickness.

3. Some types of wallpapers are not small money. This is due to the price used in the production of materials.

4. Subjected to deformation with a sharp change of temperature or humidity, it is extremely rare, but it should be considered for pasting such a room.

5. When blowing vinyl wallpapers on a fliesline basis, it is necessary to clearly follow the instructions, otherwise there may be irreparable consequences (bubbles, folds, etc.)

So, you entered a construction store or wallpaper store, and you have a head from the abundance of goods. In not dependence on the past room, most likely your choice will fall on vinyl wallpaper on a fliesline basis. And it will be right choice. These are high-quality wallpapers and you will be comfortable not only to work with them, but also admire the fruits of your work.

And so, you have a wallpaper and a great desire to transform the space around you.

Additionally, you will need:

Materials for wall equalization, and at the top for porous surfaces (reinforced concrete, plastered walls) is better to use primer;

Adhesive substance for wallpaper, according to the information of the manufacturer of selected wallpaper. Do not rely on the ratio of the liquid and the mixture indicated on the tutu with the adhesive substance. We must take into account the thickness and severity of purchased wallpaper. What they are harder, that's right to make glue. Based on the experience, the glue bundle goes on a small bucket with water with a tank of ten liters (consistency of a thick jelly-like substance), give a little to stand up (about 5-15 minutes) and glue is ready to use if not used fully can be left the next day;

Roller and brush (convenient to work with a tassel for processing hard to reach places, corners and edges of cloths);

Capacity for glue breeding (plastic bucket, and better stuff. Watering a roller glue will be more convenient);

Rigid rubber roller, rubber spatula or pure rag for glue excess (to remove cavities with air from under wallpaper);

Scissors or a stationery knife (after gluing, for trimming unnecessary wallpapers it is more convenient to use the stationery knife, it must be sharp, otherwise you will not be able to cut off the extra pieces and the risk of getting torn edges. To cut pieces, use scissors);

Long or plumb.

Preparatory work

1. It is necessary to remove the not necessary from the surface of the walls (tile, old wallpaper, etc.). If this old wallpaper is wetted with water and removed with a spatula. Lighting old paint It is better to handle emery paper.

2. If necessary, with a putty align the walls. Perfect evenness to achieve not necessarily. But in order to completely eliminate the occurrence of bubbles and empty cavities, try to achieve it.

3. The base of bright wallpaper can shine, as Flizelin is transparent. In order not to spoil the end result of your work, it is worth making the color of the wall or ceiling smooth and monophonic.

4. If you forgot to get a primer for a wall of drywall or a painted wall, they can be covered with wallpaper glue communicated to liquid state (liquid sour cream). That will avoid a large consumption of finished glue.

I hope no one needs to remind that the presence of drafts, it is a threat of successful pasting of the room by wallpaper. And therefore it is necessary to close the holes in the room and protect the room from the slightest breeze.

Despite the fact that the glue on this kind of wallpaper should not be applied, in hot weather and or in the dry room it does not hurt. Make the adhesive substance should be on the glued wall and on the wallpaper (of course not in such quantities as on the surface paying attention to the edges of the canvas).

Flizelin-based vinyl wallpaper

1. Wallpaper on the phlizelin is only in the jack without gaps.

2. Marking. This is an important step for vinyl having a drawing with straight lines, where errors, and in the places of doors and windows of the horizontal level will be visually visible. It is more convenient to start glue from the visible angle of the room, mostly the angle from the window. With a long construction level or a plumb, in the selected corner of the room, you need to delay a strictly vertical line. This will be the reference point, from this vertical and goes the course of pasting cloth wallpapers.

3. Slicing methods are offered: - immediately after gluing onto the wall (acute stationery knife over a spatula or scissors); - attach to the dry wall of the canvas and cut off the desired size for sticking to the wall. I'll say right away (by personal experience) If the wallpaper has a pattern, it is more convenient as sticking, it is pre-applied to a dry wall to the glued web wallpaper for combining the pattern, and then measure and cut the required size.

4. Clay can be applied to the wall with a roller or brush. It should be densely to miss the place of stickers of the canvas, without skipping. Wallpaper substrate is superimposed to the surface and smoothed from the middle to the sides. Check the level vertically if you can access the web and apply again, these actions will not damage the wallpaper, and begin to remove the air with a solid roller, a rubber spatula or a clean rag (who is more convenient) to eliminate air cavities. Crop line of wallpaper.

5. We follow the algorithm of paragraph 4 and cross the next roll. It is necessary to carefully press the place of contact of the canvase, and remove the surplus of the adhesive substance. Depending on the vinyl spraying, gently use the adhesive substance. Preferably to be outer surface Wallpaper glue did not fall, as the spraying on some types of wallpaper is very gentle and can be spoiled appearance.

6. Corner pasting Responsible and complex work from the entire sticker sticker. Want to achieve perfectly saved corner? It is necessary to perform work gently and be attentive. For this angle, we wash the glue, using the brush. In this case, the "glue oscillation" rule does not work, here the wallpaper is better to stick. The canvas are cut horizontally with a margin of 5-10 centimeters. At the angle put the bedside down, then another is placed on it. Unnecessary strips are cut off with a sharp stationery knife at the height of the corner of the room. The junction must come directly in the accumulated corner of the room.

There are no difficulties in the glue of vinyl cloths on the phliselin substrate, but at the same time requires accuracy and time to execute. Follow the rules for applying glue and the result will not make yourself wait.

Well, now you can go for work and turn the house into a cozy and stylish oasis.

Bright ideas, successful repair and impressions of the work done!

Classic paper wallpaper Cause consumers a much smaller delight than modern finishing materials. Manufacturers produce an extensive range of wallpaper products, among which fliseline products use in great demand. They have high strength, wear resistance, rich gamut of shades and textures and give the interior with an original highlight. But for the decoration of walls and ceilings was impeccable, you need to know how to glue wallpaper on a fliesline basis, correctly accumulate the angles and apply the glue composition.

The complexity of working with phlizelin material is the density of products. But this moment should not confuse anyone, because after a pair of glued bands, experience and pasting skills come. Vinyl wallpaper on a flieslinic basis is not necessarily smeared with glue, it is enough to handle walls or ceilings in the rooms. Important advantages of materials - high plasticity and thickness due to which you can hide minor base defects.

The main nuances, how to properly glue the vinyl wallpaper on the phlizelin-based basis:

• Due to the composition of cellulose fibers and polymer binding components, the material refers to the universal type of coating, suitable for pasting any room.
• With work, you can cope with yourself, which allows you to save on the services of a professional brigade. In extreme cases, you can glue wide wallpapers on a flies-based basis with an assistant.
• The surfaces of the surface must be prepared. The color of the ceilings or walls should be homogeneous and not contrasted with a tint of wallpapers that have a translucent texture.
• It is easy to achieve an ideal coating without visible seams, due to the presence of a qualitatively treated edge of the strip that glue the jack. This also contributes to the meter width of rolls.
• Wallpaper glued quickly and simply, the application of glue on the bands is not required. Enjoy enough adhesive mixture Surface, apply a prepared segment of wallpaper and grop tight, kicking bubbles.

Cut the material on the strips of the desired length is necessary after checking products for the presence of marriage and counting the lifting of the room. Domestic manufacturers produce rolls with a width of 53 cm according to the standard. Foreign companies offer consumers of a large width of 106 cm (meter) and non-standard size in 70, 90, 100, and even 140 mm.

On a note! Very high quality vinyl on a fliesline basis produces Germany, Italy, Belgium and France. The width and length of rolls varies, so when buying needs to pay attention to the size of the finishing material.

With the help of fliselin wallpaper, you can create a seamless effect on the surface. This is very valued, so finishing materials enjoy a big dispute.

The meter width is less junctions on the wall, but these are not the only advantages of flieslinic cloths:

• Easy and fast accumulation procedure. With how to glue wallpaper based on Flizelina, every person will cope, manifesting a little patience.
• For the purchase and stick of one roll of meter vinyl, you will spend less time and money than the acquisition and sticking two narker cloth rolls, plus glue savings.
• A wide variety of textures and shades allows you to realize interesting designer ideas. In the line of fliesiline wallpaper there are options imitating wood, natural stone.
• Technically, the three-layer phlizelinic materials are competent - opaque base, fliesline, vinyl coating as a decorative layer that gives texture and relief.
• Dense structure and elastic properties, due to which it is possible to disguise the irregularities of walls, microcracks, minor surface drops in height.
• High tensile strength, which provides a flieselic substrate, and stability of vinyl coating to abrasion and loss of color saturation.

The additional advantage of wallpaper is easy to care. They can be cleaned with a dry and wet way. If the room increases the level of humidity, the material is not stretched and "not sitting".

To give a room a new look, update the design or implement a bold interior solution, the walls of the ceilings and walls can be painted in the desired shade.

Checked! Flizelin wallpaper can be painted up to ten times. It is unlikely that someone wants to experiment so often with color, but three times the staining material withstands exactly.

The first rule that should be adhere to before purchasing a finishing material - the vinyl in the roll looks differently than on the baked surface. If you buy a wallpaper in a specialized store, you can estimate the appearance of the material according to the samples presented on the stands.

How to pick up a meter wallpaper:

• To get a harmonious interior design, choose finishing materials from one collection, series and batch of one manufacturer.
• Because wallpapers are not suiced, you need to make sure of their compliance with the declared quality, asking the seller to demonstrate the availability of a certificate.
• If there are several options for wallpaper, first view the lower and top rows, and then the middle - at the level of the eye often place a product that is not in demand or cost more.
• You need to choose a drawing and color to your taste, but it is necessary to take into account the overall concept of the interior, the combination color Gamma. and wallpaper textures with furniture objects and room furniture.

To get a visually solid surface without seams after pasting, it is better to choose a wallpaper with a foamed vinyl coating. Fliselinic materials have no shrinkage after drying, which greatly simplifies work with the finish.

There are no significant consumers on the wallpaper on the phlizelin basis. To get the perfect wall covering and ceilings, it is important to prepare a qualitative basis for subsequent pasting. It is necessary to align the surface if it has defects, and large cracks gently shine, pushing and sanding with fine-grained sandpaper after drying.

Some inconvenience of how to glue wallpaper from vinyl on a fliesline basis:

1. Phased preparation of the basis for the upcoming pasting. The surface serves as a base for sticking wallpaper, so on quality preparatory work Depends the strength of fixation of the canvases.
2. You need to stock up with an additional wallpaper roll, if the material is not enough or in the gluing process, the strip breaks, it is nervously lying on the wall. It is important to choose rolls from one batch.
3. Wide wallpapers are glued quite easily, but for careful salary need an assistant. He will be able to hold the edge of the strip so that it is arbitrarily not glued to the smeared glue based.
4. Under the wallpaper there are air bubbles that need to be driven by a roller to the edges of the canvas. If this is not done, the material in such places is discouraged and gradually lags behind.
5. If the question arose how to glue the vinyl wallpaper on the fliesline in hard-to-reach places, it is necessary to leave the allowance and then calculate the consumption of the material.

Fliselin canvases are obtained from cellulose fibers, so they are committed harmless to health. After applying the vinyl coating on them, the effect of the rugs of products is not excluded, which can be attributed to the disadvantages of finishing materials.

Specialists advise! There is a freezene and paper-based wallpaper on sale, which differ in characteristics, brake technologies and cost. How to check the multi-layered cloths? If there is an opportunity, you need to tear a small piece of wallpaper and see how many layers it consists.

Tools and materials

One of the advantages of flieslinic wallpaper is that the canvases themselves do not need to miss glue. It means that it does not require additional space to accommodate wide strips.

To independently cale the room with meter wallpaper, you need to prepare the necessary tools and materials for work in advance, the list of which is presented below:

• Flizelin wallpaper and glue that is suitable for them.
• Construction level, preferably laser.
• Two clean capacity: one for glue, the second for water.
• Narrow metal spatula, roller with a long pile.
• Plastic spatula, brush for applying glue.
• Roulette, pencil and knife for trimming.
• Foam sponge, clean rag, sandpaper.
• Putclone (start, finish), Sherryanka grid, primer.

Listed tools and materials that are required not only for sticking wallpaper, but also for high-quality preparing surfaces under the sticking.

For the final finishing of the room, you can buy a decorative plinth or a corner of plaster, polyurethane foam, polyfoam. It gives the room complete view and hides the docking seams between the canvas on the wall and the ceiling.

Masters recommend! With the help of decorative fragments, you can hide insignificant wallpaper trimming defects. Therefore, glue plinths and corners are easier after sticking the canvas, and not to start the wallpaper with a spatula under the already glued trim.

Surface preparation

The base under the flushing wallpaper should be carefully prepared. Ignoring this moment leads to a rapid lag of cloths, breaking the material in places of cracks and aesthetically unattractive view of the room.

The preparatory stage is the most difficult and takes a lot of time:

1. It is removed from the walls of the cover of the sockets, the housings of the switches, dismantle the fasteners and remove the chandelier, and all the resulting holes gently take the painting tape.
2. Before glueing a meter wallpaper with your own hands, it is necessary to carefully remove the old coating - rimp wallpaper, soaking them with water, blur the whitched ceiling, wash off the paint and plaster.
3. Assess how the foundation looks like is the presence of joints, deformations, cracks. All the problem areas to sharpen, laying the sickle grid and give the mixture to dry. You can apply the finish putty on the entire surface completely to smooth the roughness and partially align the differences in height.
4. If the condition of the walls and ceilings is completely unsatisfactory, they are sewn sheets of drywall, and the seams are shut off with putty. Dark GLCs need to be processed completely.
5. Places of applying starting and finishing putty to handle emery paper. After that, carefully mix dust, wash the walls or wipe with a damp cloth.
6. Apply primer into several layers, making pauses to dry out the compositions. The primer is selected depending on the material of the covered surfaces.

Perfectly smooth walls create a good database for shook wallpaper. If you do not use the primer, the part of the glue is quickly absorbed into the surface, and the wallpaper will be worse worse. From how qualitatively prepared preparation, the durability of the finish depends.

Attention! The primer on the walls and the ceiling should dry well. Time of complete drying is indicated on containers with primer composition.

Ideally, all measurements need to be held before the purchase of wallpapers, as it is easy to make it, using a tape measure. If the material is already purchased, it remains to cut the stripes.

How not to be mistaken in the calculations on a specific example, if room dimensions 4 * 5 * 2.5 (length, width, height):

• Measure the height of the room from the floor to the ceiling \u003d 2.5 m.
• Adjasted 5-15 cm to this figure "Prointer" \u003d 2.65 m.
• Check the length of the roll - there are 10, 15, 20 meters.
• They consider the number of integers in roll \u003d 10 / 2.65 \u003d 3.77 pcs.
• Rounded the value to a smaller side \u003d 3 stripes.
• Calculate perimeter - (length + width) * 2 \u003d (4 + 5) * 2 \u003d 18 m.
• Do deduction of windows and doors, suppose \u003d 1m + 1m + 1.5 m \u003d 3.5 m.
• From the perimeter take away the width of windows and doors \u003d 18-3,5 \u003d 14.5 m.
• The resulting value is divided into a roll width \u003d 14.5 bands.
• Calculated how much rolls need \u003d 14.5 / 3 \u003d 4.83 rolls.

For stacking walls in the room with dimensions 4 * 5 * 2.5 meters, you need five 10-meter rolls of fliesline wallpaper width 106 cm. In this case, you need to buy one roll more for the walls of the walls above the door, above the windows and under them. The material is cut into strips of the required length (2.65 m). By the same principle, the consumption of material on the ceiling is calculated. The length of the strip takes the distance from the wall with windows to the opposite side. If the wallpaper is drawn, each strip is customized under the previous, thoroughly combining pattern.

As an option, you can glue a meter wallpaper on a fliesline basis, straight from the roll without cutting.

After preparing the required number of paste bands, you must apply marking. The vinyl wallpaper is started to glue from the window opening. With the help of a plug, check the checkpoint and spend the vertical strip. On the ceiling markup starts from any edge perpendicular to the windows, because the canvas need to glue the jack. In rare cases, the strips are placed along the length of the room, then it is convenient to place the surface from the windows.

Important! In order for the day lighting, the walls of the wallpaper should not be seen, the strips glue perpendicular to the windows. But if on the design idea, the pattern of wallpaper on the ceiling should pass along the length of the room, the stripes can be glued along the wall with windows.

For vinyl wallpaper, universal formulations or special means for materials on a flieslinic basis are chosen. Before mixing the product, it is necessary to check the compatibility of glue and wallpaper, as different compositions are suitable for lightweight, heavy, dense samples.

How to cook glue:

1. In bucket poured clean water in the desired proportion.
2. Liquid stirred to formed a funnel.
3. Slowly sprinkled glue and constantly stirred.
4. Give mixtures well swell for 20-30 minutes.
5. Before use, glue is mixed again.

The composition is applied only on the surfaces of the surface, but so that the wallpaper is tightly on the ceiling, the canvas themselves can be missed. It is worth adhered to this recommendation in the hot season, since the adhesive quickly dries on the wall.

Attention! It is impossible to disrupt the proportions of water and glue, indicated by the manufacturer on the packaging. Otherwise, the mixture is inconsistent with the consistency and loses its adhesive properties. It is better to use freshly prepared glue.

The process of sticking

How to glue wallpaper on a fliesline basis, every wizard will discern, since there are no fundamental differences from the traditional technology of work. It is necessary to remember that it is not necessary to apply glue to the bands, except for pasting the ceiling or repair at a very hot season.

An important condition that must be observed is to exclude drafts so that heavy canvases do not lag behind the surface.

How to glue wallpaper on a fliesline basis correctly:

• Prepare walls and ceiling, necessary tools and glue.
• Select the direction of bands on the wall taking into account the angle of the fall of the light.
• Hold the drawing to get the effect of a continuous pattern.
• The main rule of sticking - the canvas combine strictly jack.
• Prepare a strip, the wall is smeared with glue using a roller or brush.
• Immediately fix the cloth on the wall at the level of the control line.
• Lounge align from the center to the edges, kicking the air with a roller.
• Crop the extra part of the wallpaper and proceed to sticking the next strip.

In order to smoothly cut the cloth, a wide spatula is applied to it and it is neatly a knife with trimming. Products with a pattern are measured immediately, carefully customizing the pattern, and the excess is cut off so as not to confuse the arrangement of the ornament. Since the stripes are glued, before fixing the next strip, the edge of the previous canvas is not smeared.

Master Council! While the glue does not dry completely, you can not open the windows or swing the doors. If such a situation turned out to be inadvertently, the canvas are immediately lined.

On video: Master class sticking wallpapers on a fliesline basis.

Casting complex plots

Each room has places causing some inconvenience when finishing with wallpaper. These are angles (and they are often uneven), door and window openings, niches or arches.

How to glue meter fliesline wallpapers on complex areas of walls and ceilings:

1. Internal angles. Measure the strip width from the edge of the previous web to inner corner, add 1 cm per battery. They smear the angle of glue and glue the strip, capturing the part of the adjacent wall and wrapping the edge of 1 cm. Linen align and cut off excess. By the same principle, the second part of the corner is covered. Wallpapers cut the vertical so as not to hurt the lower strip. We combine the edges and after drying it is obtained by an imperceptible junction.

2. Door or window opening. If one-photon wallpapers or instances are used without selecting a pattern, gluitive them easier, as you can skip the site over the doorway and then take it into small fragments. When the wallpaper from vinyl on phlizelin with a pronounced pattern, the drawing will have to be combined immediately, not passing the area above the door or under the window. The band is carefully measured, cut out the place for the window / doors in it, and glued to the wall, combining the ornament.

3. "Drown" or detachable angle. If such a plot in the room is located in a prominent place and attracts attention, it is impossible to do the outstretten. How to glue vinyl wallpapers based on Flizelin in this case? The band is set on a adjacent wall for 2 cm, but the science will be unequal. In the narrowest place, the casualties retreat from the edge to the angle of 1 cm, after which they measure the width of the roll from this point and spend the vertical line. Fall in the uneven corner will be approximately 1 cm, but will not be very noticeable.

Some wizards when pasting uneven angles use a double cutting method. How to glue phlizelin meter wallpaper in this case: paste two strips with a large flax in 5 cm, heavily indulging them into the angle; With the help of a rigid profile, the wallpaper is cut in the center of the corner vertically, the edges are cleaned too much, the edges of the bands are lubricated with glue and stroke the roller.

On a note! In places setting outlets and switches, wallpapers glued, as usual, but marked the location of electrical devices. In the noted lines, cuts are made, bend wallpapers inside, and after drying the glue boxes are mounted in the same place.

Coloring

The important advantage of vinyl is compatibility with paint and varnishes. Wallpapers on a fliesline basis are often glued as a base for further paintwork. The type of paint is chosen in accordance with the instructions specified on the package.

Staining nuances:

• Buy paint for internal works.
• Code the entire volume in the desired shade.
• Thoroughly stirring the coloring composition.
• Apply a roller on the wallpaper, slightly pressing it.

Fliselinic canvas can be painted about ten times. It should only be borne in mind that painted walls and ceilings have low vapor permeability. Usually consumers paint rooms, water-plated, no more than three times.

NEW! There are freezelin photo wallpaper on sale, which are interested in interior design. With a large-scale image, you can transform a living room or bedroom. The technology, how to glue phlizelin wallpaper on the wall, does not differ from the standard process - surface preparation, glue preparation, sticking strips. The only nuance - if the photo wallpaper does not fit completely, the drawing is placed in the center and cut the canvas along the edges.

Working with wide vinyl products does not require special skills. The material is well glued to walls and ceilings made of concrete, drywall, wood. You can cope with sticking alone, but it affects the speed of work.

Independently wide strips are more difficult to glue than with an assistant, but it is possible.

If the cloths are lagging behind or fall from the ceiling, there may be several reasons:

• Poor-quality surface preparation.
• Incorrectly selected and made glue.
• Glue managed to dry up until gluing.
• In the room there are draft whether it is very hot.
• Under the wallpaper formed air bubbles.

Wide vinyl canvas decorate the room, creating the effect of a solid artistic composition without junctions. The process of pasting is not fundamentally different from standard technology, you can perform work yourself. To get the desired result, choose high-quality wallpaper, glue and well prepare the walls and ceiling to pasting.

Wallpaper Wallpaper Stages (2 video)

How to glue wallpaper on a fliesline basis (20 photos)

Tsugunov Anton Valerevich

Reading time: 4 minutes

Modern materials for interior decoration of houses and apartments include vinyl wallpapers with the basis of Fliselin. This is not exactly the usual material, and the technology of working with it differs from the mixture of traditional paper canvases. Let's look at the important features of this coverage and find out how to properly glue wallpaper on a fliesline basis.

Attractive sides of vinyl canvases

Vinyl on a fliesline basis is a high-quality synthetic material. It is a two-layer coating:

1. The base is a phlizelin canvas consisting of cellulose fibers. Possessing high plasticity, it largely exceeds paper counterparts. The material goes to the surface well, smoothed and clips with her. In this case, the glue is applied only on the wall.
2. Facial part of vinyl wallpaper - polyvinyl chloride. This layer can be structural (of foamed vinyl), smooth, large-scale, with hot embossed, with filling silk yarns.

Some of these wallpapers, specially intended for painting, can be repeatedly painted by changing the interior of the room. They perfectly hide the wall defects and mask the flaws flashes. Vinyl cloths are used in the interiors decorated in different styles. This is a functional material with high performance: it does not have to change it for a long time.

Vinyl products are heavier in weight and volume in the format. Rolls have a different width: from traditional 53 cm to 70, 100 cm. The length varies and amounts to 10, 15 and 20 meters. Wide cloths after sticking create an impression of coverage without seams. Such wallpapers are more expensive than paper based material, but attract consumers with their quality and excellent decorativeness.

HELPFUL INFORMATION: What wallpaper stuck in the bedroom: types of material and color

Materials and tools for working with vinyl wallpaper

By purchasing vinyl wallpaper on the basis of phlizelin, as a wall covering, it is necessary to take care of the selection of special glue. An ordinary celaser or composition for paper canvas is not suitable. Do not take universal dry mixes: they may contain components harmful to this coverage. In the accompanying instruction on the use of vinyl wallpaper, the type of glue is indicated, which is most suitable for fastening the surfaces to the surface.

For preparatory work before sticking wallpaper and the main process, you need to buy:

• putty or other material aligning walls;
• primer;
• soft and solid (rubber) rollers;
• brush;
• sharp stationery knife, scissors;
• plumb.

If there is no skill working with vinyl products, it is worth starting with the customs of the usual size: 53 cm in width and 10 m in length. It is recommended to use a monochrome coating without large drawings that require fittings. Only having mastered the handling technique with such wallpaper, you can try to work with large-format products.

Preparatory stage

Before glue wallpaper on the walls, the surface must be prepared.

1. : Wallpaper, paint or other.
2. Clean the base from glue and expand cracks.
3. Apply a layer.
4. Conduct the removal of wall defects with a spacade diluted to optimal thickness.
5. Again the liquid soil is applied.

It is not at all necessary to thoroughly burn the surface and make it absolutely smooth. With this task, the selected wallpapers will be perfect.

Cutton cuttings

To properly prepare the material itself, you need to do the following:

• At the stage of acquisition of wallpapers, you need to verify the party numbers. Otherwise, the tubes may differ in shades. If you misunderstood and one roll does not coincide with others by tone, it can be used for pasting of hard-to-reach places, above the window or doorways, in the corners. Where the difference in color will not rush into the eyes.
• The centimeter tape measure the height of the wall, add 5-7 cm to it at the bottom of the bottom and on top. This value is transferred to the wallpaper canvas and cut the desired length. The following strips are checked from the first. If there are an abstract drawing on the products, they do not need to be customized. With a large and small ornament, the lines will be aligned. Make it better on the floor using at the same time 2 rolls.

HELPFUL INFORMATION: How to glue wallpaper (video)

Council. To align the band-glued on the wall will be easier if the surface is pre-applied to the surface: the vertical lines, the distance between which is equal to the roll width.

Preparation and use of adhesive composition

Nuances of working with glue for cloths based on Flizelin:

• Glue for vinyl wallpaper is sold in a dry form. Before applying it is bred by water in the ratio indicated on the packaging package. Its consistency may be a bit thick than manufacturers require.
• The main feature of phlizelin wallpaper is that the adhesive mass is not applied to the canvas itself, as for other materials, on only on the wall. For the stability of the coating, you can additionally slip the edges of the strips.
• The composition applied to the wall dries quickly enough, so you do not need to cover them at once a large surface area. For one, we need to apply glue on the wall fragment, slightly exceeding the width of the wallpaper roll. Landmarks will serve as previously applied markup.

Working with wallpaper

The process of sticking vinyl canvas on fliseline will look like this:

• Start the walls of the walls most often from the window, continuing the movement clockwise. You can read about other options for the "starting point" here.

• The segments prepared for sticking are folded into a roll or several rows so that they can be comfortable to take and transfer to the surface.
• The upper edge of the strip is applied to the lubricated glue wall, leaving the allowance for the ceiling of 1.5-2 cm.
• The plunder is checked how far the strip falls. If there was a markup on the wall, this does not have to do.
• Or a clean rapid spend on the canvas, trying to consolidate it first in the middle, and then at the edges.
• Making smooth, with a little effort, movement, tool spend around the cut of wallpaper from above-down from the middle to the edges. For smooth canvases, it is convenient to use a plastic spatula for textural canvas - roller.

HELPFUL INFORMATION: How to glue ceiling plinth On the wallpaper and can it be done?

• Carefully smooth the edges.
• The next strip is glusted by the "Jack" of the previous one, trying to make sure that the canvas do not dispense.

Work in complex places

Difficult to glue the wallpaper are sections of the walls behind the heating batteries, in the corners, above window and doorways.

• For radiators to use solid canvases. The strip of a certain length is cut into 2-3 parts by wave-like motion. Each piece is glued separately, trying to press as close as possible to the wall. Here you should use a little more glue. The surface will be heated, so the thin layer of the composition dries too fast, and the wallpaper will populate.
• To cover corners, it is recommended to make a gluing of two segments. The first cloth for several centimeters comes to the next wall. Another edge is glued on top of it. Both canvas cut through a sharp knife, extra thin strips are cleaned.
• On the areas above the windows and doors usually stick trimming remaining with rolling rolls.

Vinyl wallpaper on a fliesline basis is a cheaper option for wall decorations, compared with fully phlizelin material, but they are practically not inferior to him in quality. Such finishing is resistant to damage, environmentally friendly and is inexpensive, therefore was widespread. To shove the vinyl wallpaper on a fliesline basis (VF) correctly, it is enough to know the basic principles of work and several small secrets.

Characteristics of vinyl wallpaper on flizelin

Similar finishing material is an excellent combination of practicality, reliability and flexibility, great for conducting repair work Alone. To qualitatively glue this type of wallpaper, special knowledge or experience is needed.

Dignity of material:

• resistance to moisture, which allows the use of VF wallpapers in the kitchen, in the bathroom or basement;
• pollution that appeared on the surface is easy to wash off with a sponge with a means of household chemicals;
• such wallpapers can be repainted in another color up to 15 times;
• such decoration has increased strength;
• the range of colors is very wide;
• VF wallpaper is resistant to the rays of ultraviolet;
• the properties of vapor permeability enable the walls to "breathe", which prevents the occurrence of mold and allows you to create a favorable microclimate in the room;
• when the walls are collected, small surface defects are disguised;
• a long service life of the finish, which is at least 10 years.

The disadvantages include the fact that after gluing cheap vinyl wallpapers based on Flizelin, the first few months in the room can be felt a specific smell. Eliminate the lack will help applying wallpaper on the surface acrylic paint or primer. They will form a polymer layer, which will serve as an obstacle to the contact of vinyl with air.

Glue vinyl wallpaper on a fliesline basis should, apply adhesive composition only on the surface of the wall, which makes it easier to work significantly.

Required tools and materials

Make high-quality repair without required tools It is impossible. In order to glue wallpaper on a fliesline basis, you will need:

• plumb or construction level;
• roulette;
• pencil;
• stationery knife;
• putty knife;
• rubber roller (for smoothing glued to wallpaper wall);
• 2 brushes (large - for applying glue on the walls and small to miss the place of joints of the canvas);
• capacity for the dilution of glue (bucket, pelvis);
• line.

Tip! The plumb can be made with their own hands from a long rope, tied to one end of its end the ship (for example, a nut).

How to choose glue

A high-quality and reliable mounting to wallpaper wall can only be ensured correctly selected glue composition. Save on the tool, buying cheap analogues of good glue, it is not necessary, since the canvas on the flieslinic basis are heavy and to stick them firmly, a high-quality thick composition is needed.

Prepare adhesive solution should be prepared in accordance with the manufacturer's recommendations specified on the product packaging. Dry powder should be poured into the water with a thin trickle, stirring constantly. This will prevent the formation of lumps. Leave the solution for swelling for a while (how much specifically the mass should stand, indicated on the package), after which it is quite well mixed.

Surface preparation

It is very important to prepare the surface of the walls. To do this, first of all it is necessary to delete old finish Metal spatula, pre-mixing it with water or weak glue solution.

Any defects, cracks, curvature need to be sealing a starting putty, and after drying it to handle the surface of the sandpaper. Drops that do not exceed 1 centimeter, the vinyl wallpaper on the flieslinic basis is easily disguised.

Tip! Optimal option - cover the walls to the finish putty completely, since in this case the surface is perfectly smooth, and the finish will look much more attractive and more carefully.

Walls made of concrete, drywall or plaster-covered be sure to treat primer with antifungal additives. This is necessary, since such surfaces are distinguished by increased absorbability, that is, they actively absorb moisture, including from glue, thereby significantly reducing the quality of the mounting of wallpaper to the wall. On Flizelina, mold (fungus) is developing extremely rare, but it is still not necessary to neglect additional protection.

Tip! It is not necessary to buy special primer, it is resolved for this purpose to use the adhesive composition that the wallpaper is installed. Apply glue on the wall with a fur roller and give the treated surface to dry.

If both light color, then the primer is better to paint the same. This is due to the fact that the vinyl finishing materials on the phliselin-based basis are characterized by transparency, and therefore the likelihood of the appearance of spots on them is large.

The primer applied to the wall must completely dry and only then follow the surface to be bold.

Using a plumb, swipe the perfect vertical line at the start of the wall of the wall. It is not necessary to hurry, even if the glue gets dry, it is allowed to apply it to the surface. In addition, the wallpaper on a flieslinic basis is allowed to tear off the wall and paste again if something went wrong.

Instructions for gluing

The process of gluing vinyl wallpaper based on fliesline includes four main stages: cutting roll, wall markup, adhesion kneading, actually installation.

Cutting tools. After the surface of the walls is prepared, measure their height with a tape measure in several places. It is necessary to determine the length of the piece of chipping material. To the resulting digit, add 10 cm - this is a stock of 5 cm at the ceiling and floor. After sticking the first sheet, you will need to align the pattern if it is. To do this, attach the following piece to the previous one and accurately measure it. 5 cm on allowances should also be left. Each roll is 10 m long if the ceiling height is 270 cm, then in each of them will remain 60 cm in stock. Therefore, it is not necessary to be afraid to cut off the more superfluous, one roll is always enough to fit the pattern on three full-size sheets.

Pencil is made. To do this, it is necessary to hang a plunder under the ceiling and spend the line along the rope. After the distance equal to the width of the canvas or roll (it is measured at the ceiling), use another line using a plumb. This technique will allow to glue the finishing material strictly vertically and as much as possible.

Preparation of adhesive composition. Pour in a bucket or tase of approximately 5 liters of water (the exact amount is indicated by the manufacturer on the packaging with the composition). Put the glue with a thin flowing into the water, simultaneously stirring with a stick or any other similar subject.

Tip! To mix glue to high quality, use a drill with a special nozzle mixer.

Leave the solution for 10 minutes for swelling (how long the adhesive should be applied to the manufacturer on the package). Mix a thoroughly again.

Start the wall from the window or door. Squeeze the wall glue, moving from the ceiling to the floor, the width of the missing vertical strip should be equal to the width of the web (roll) or a little wider. To the wall treated with adhesive composition, attached a sliced \u200b\u200bpiece of wallpaper.

At the top, at the ceiling, be sure to leave the allowance of 5 cm. Press the cloth over the entire width first from above, then move down and press it along the markup line on the wall. After that, glue the remaining central, side and lower part of the sheet.

Align the joints of two adjacent cloths - it will be easy, as Flizelin is elastic and stretched.

Tip! To stick the place of the joint to the wall as securely as possible, ride it with a solid roller or pretty press the narrow face of the plastic spatula.

When the cloth is glued, cut the battles from the floor and the ceiling. To do this, pinway the wallpaper in the junction of the wall and ceiling / floor with a long metal spatula. On the edge of the tool, make an incision with a knife. When the blade is approaching the edge of the spatula, leave it on the spot, and the spatula will move and continue cutting the canvas. The knife should move continuously, you do not need to clean it when rearranging the spatula.

The appeared air bubbles are removed by filling with a glue using a syringe and extinguishing the air with a wide brush or a special rubber roller. At the same time, you need to move from the ceiling to the floor and from the central part to the edges.

Excess glue remove immediately with a damp sponge or cloth so that in the fields of the junction of the canvas, as well as the floor and the ceiling there are no brilliant traces, which significantly worsen the appearance of the finish.

By gluing a piece in the corner, on one of the walls, make a two or five centimeter nesting of cloths. In the central part of the allen in a sharp knife, along the edge of the long metal spatula, make a vertical incision along the entire length. Due to the cut, thin strips on the adjacent canvases are cut off. After removing these strips, a perfectly smooth junction turns out.

Similarly, all the walls in the room are seeded. If the next piece covers the door or window, then superfluous (emptiness) just cut off, initially planing the material on the wall. Do not forget to make an indent to 1 cm from the edge, it will provide the necessary reserve of the web, if the opening is not quite smooth.

Open windows for ventilation in the renovated room is allowed not earlier than 48 hours, otherwise the wallpaper will begin to bubble and fall behind the wall.

A special popularity was obtained by trimming on the flieslinic and paper bases, and the leading place among building materials in the modern market took advantage. Easy to use, high specifications And the environmental friendliness of such materials allows you to punish them with your own hands on any complex uneven surfaces.

Advantages of phlizelin wallpaper

Fliselin is a nonwoven fabric that is manufactured by pressing. Unlike the paper base of building materials, the phlizelinic has a multi-layer structure, which makes it possible to hide minor flaws in the form of cracks and irregularities. The canvas on the flieslinic basis is not deformed and not stretched during operation. They have a wider cloth, which allows you to quickly shove the material to the entire work surface. These and other qualities make flizelin widely used in construction.

Preparation of the working surface

Before glue any finishing materials, working wall It is necessary to carefully clean from old cloths. The procedure becomes complicated if the walls need to be cleaned from old paper residues, which were used before joinery and PVA. Separated the remnants such, after overpowering them for a while warm water. When the paper is impregnated with water easier to separate them from the wall. Only soak the walls are needed in parts to have time to remove all messy remnants before they dry.

How to glue wallpaper on a fliesline basis

Punching materials on the phlizelin basis does not require special skills and knowledge. You can glue on the following surfaces:

• wooden;
• plastered;
• painted;
• concrete;
• plasterboard.

Good breathability provides free air access and thereby prevents the formation of mold and fungi under the finishing material. In order to properly glue on the walls of the fliesline canvases, you need to know some of their features:

Vinyl Wallpaper on Flizelin Base

Fliselinic canvas can serve as a base for vinyl wallpaper. In this case, the upper decorative layer is performed from polyvinyl chloride composition. This is one of the widespread types of wallpaper. Such wallpapers have all the advantages of the phlizelin finishing material, but the big advantage is variety of color gamut, pattern and texture. Vinyl wallpapers are made with a smooth surface and an embossed embossed pattern. A wide range will allow you to quickly choose a cloth for any interior.

It is possible to use such cloths in the kitchen with a large humidity. Vinyl spraying allows when cleaning wallpapers apply a wet sponge for rubbing. Speed \u200b\u200bdust on close wallpaper is easy to remove the vacuum cleaner. Variety of vinyl layer texture gives wide opportunities For the design of any room.

Features of sticking vinyl wallpaper

When it becomes necessary to cross the vinyl wallpaper on a fliesline basis, remove the wall covering to the base is not necessary. It is more correct and easier will remove the upper vinyl layer and leave the fliesline basis for further use as an aligning basis for new coatings. Vinyl wallpaper can be laid both on the walls and the ceilings. And the dense fliesline base makes them easy to operate and durable.

The only disadvantage is the airproof polyvinyl chloride. This disadvantage can cause the appearance of mold and characteristic odor, therefore it is recommended to use adhesive composition with anti-grab properties. But modern technology The production of building materials is improved every day, and wallpapers with breathable foamed layers of polyvinyl chloride appeared on sale. Although such easily deformed, it is better to use vinyl foamed wallpapers for the surface of the surface in children's and bedrooms.

Punching of vinyl wallpaper on a fliesline basis

Before starting work, the required amount of cloth is measured. If it is a pattern with a pattern, it is necessary to numbered the stripes on the sticking sequence. Wallpaper sticking on the fliesline basis is made. Behind the radiators, due to difficult access, you can not glue the material, but simply paint the main color. But if necessary, it is not a solid canvas, but small stripes.

Punching of building material near sockets and switches produced strictly with disconnected electric shock . Accessories to remove and glue stripes in the usual way. Make an incision Cross-cross in the place of sockets and switches, move the canvas, freeing the openings. After complete grazing, insert fittings in place.

To finish the surface with vinyl products, use only special adhesive for heavy finishing materials. The glue concentration can be the thicker recommended on the package and when applied to the wall should not save it. Extra remnants of glue and air is dried by a rubber roller or a spatula from the center of the strip to the edges. The remnants of the adhesive are quickly removed from the canvas. Otherwise, the whole process of sticking vinyl coatings is the same as in conventional phlizelin.

Ease of use and dismantling makes vinyl wallpapers on a fliesline basis very popular and popular.