Movemental crafts from various materials will help to diversify the summer cottage.

Features of trees from wood and plywood for your cottage

How to make a crawler

What crafts can be done

Photo gallery - crafts from wood and plywood for summer cottages

One of their main distinctive features It is the ability to create such products from any submitted materials. Crafts from wood and plywood for your cottage will become an excellent decorative element. They can also carry practical benefits, be useful in everyday use.

Crafts from plywood for giving

Plywood is a thin board, which is made of wooden plates by gluing. It is great for crafts, as it is quite often found in the country area, and anywhere is not involved. The same can be said relative to various wooden utensils, as well as just knots and stumps of trees.

Features of trees from wood and plywood for your cottage

A tree and plywood has a number of positive qualities, thanks to which it becomes an excellent source material for crafts. Here are the key of them:

• Availability. You can get these materials in the country where you want to remove from the old and already unnecessary furniture, take from the remaining after repair work Stocks, simply finding on the plot, as well as many other ways to find them.

Material for crafts is not difficult to find

• Cost of crafts. This advantage grows from the first. You will not spend no means to make the product, because the material and tools are already there. With the exception of advanced crafts for which additional processing is required. But still the price will be much lower than when purchasing similar products in the store or in private craftsmen.

The cost of wood products is rather small

• Diversity. From plywood and wood you can make a huge amount of crafts, both simply decorative and helping in everyday life.

There are many versions of wood crafts for cottages

• Easy to create. Materials are easily processing, and all the necessary tools will be found in the country area. It is enough to have at your disposal a saw yes of the plans and can already be created.

Plywood and tree are easy to handle

• Appearance. Tree is natural material, and plywood is made of its fibers. This means that their appearance after processing will be quite pleasant to the eye, and the product itself will serve as a good decoration for your cottage.

Crafts from wood and plywood for giving will become an excellent decoration

The main disadvantage of the use of wood and plywood as a material for crafts is low stability to bad weather. After the rain, the product can start grew, having lost its beauty. But the handling of the crafts with a water-pumping means is able to temporarily solve this problem.

To extend the service life, treat the materials with a water-repellent

How to make a crawler

The process of creating a craft can be divided into three main stages: thinking of the design of the product, blank and processing of material, assembly. Separately, it is worth highlighting the decoration process. He is not required, for the simplest crafts it can be thrown back. For more complex products, the decoration occurs after the material is processed, and sometimes after assembling the finished product.

Threat product design

It is from the thinking of the design of the future product that the crafts should begin. In the event that the craft is simple, then there is no need to make exact dimensions. If the product is planned complex in shape and with a multitude of components included in the design, it is necessary to calculate the dimensions of one or another component in advance, as well as the method of their bonded.

Sketch Crafts from plywood for giving

Blank material and its processing

The second stage is the workpiece and pre-processing of the material. If a wooden product is used as a base for crafts, then it is to be divided into components. If it is solid, then individual details can be obtained by dipping method, if the collapsible, then simply disconnect them from each other.

Material markup for composite parts

The billet of the sheets of plywood lies in the selection of integers, as well as the pumping of normal parts in rotten.

Now you can proceed to the processing stage. All work should be done in gloves. First of all, it is necessary to give a plywood or a tree the form necessary for the product is best for this household saw. Next you need to get rid of external material defects, such as irregularities and gaps, if they do not become special elements of crafts. It is necessary to make the surface of plywood or wooden part smooth, so that there is no possibility when contacting it with it. This is done with the help of emery paper, in particularly difficult situations will help the planer.

Grinding material before starting work

An interesting solution for a wooden craft will be the use of a groin connection when dusting parts. It is quite difficult to make a newcomer, a special care is required and agreed actions. But, thanks to all the efforts spent, it will be possible to get an exercise, which will be easy to assemble, and then disassemble without disrupting the integrity of the design.

Sliding Wooden Details

When parts are already fitted in size and smooth can be searched to the decorated part. Tree and Phaneru are quite easy to paint, because it has just been shattered by sandpaper. Paint can be taken any for exterior work, including aerosol. One layer will be enough. After the product must dry completely.

Crafts from plywood and wood are easy to color

In the case of the future use of handled crafts, it should be additionally treated with a water supplying agent. For this suitable lacquer or spray.

Assembly craft

The final stage is directly assembling crafts from wood and plywood for your cottage. It should be started only after the billets are finally dried. It all depends on the complexity of the product. For example, if it is the simplest wooden box, then it is enough to combine individual parts and nail with nails to each other. For more complex products, the assembly process will be more time-consuming.

Build a simple tree drawer

For some products after the assembly, the decoration stage continues. The angles are smoothed, the joints are closed and carving is applied.

What crafts can be done

The newcomer is best to start with the simplest products and gradually, accumulating experience, move to more complex. The crafts themselves can be divided into two categories: used simply for decoration and still carrying practical benefits. Consider several examples from each group that differ in the complexity of execution.

Examples of decorative crafts

Such products are intended just to delight the eyes of the owners and guests cottage plot.

Wooden shoes will serve an excellent decoration for the hallway country house. For their manufacture, a square plywood is suitable for about twenty centimeters or a thin area of \u200b\u200bsimilar sizes.

Decorative plywood shoes

To begin with, the workpiece should be divided into two equal parts. At one of them, it is planned to be a cut line that coincides with the future form of the shoe. And cut with a saw. Carefully it will do with the help of power tools. Next, you have to treat the workpiece, removing roughness on a flat surface, as well as the smoothing of irregularities on the spell.

Painted boot for the entrance decor

Before further work, an unfinished product should be attached to the second part of the board or plywood and designate its contour. By the same principle to prepare the second workpiece. As a result, they should turn out to be approximately the same form.

The next step is to do the holes for the laces. It is easiest to outline a few paired holes on one billet, attach it to another, and after drilling them. The resulting holes are also desirable to smooth out the emery paper, for greater smoothness of the forms.

After the craft is almost ready to begin decoration. For example, paint the boot into some color or just leave the inscription on it. For greater preservation, it should be varnished. After the exercise dry, it is necessary to complete the composition, travelers of the shoelace. Now shoes can be placed on a prominent place, surprising their guests.

A wooden keyboard will be a more complex variant of the decorative craft. To perform it, you will need a rustling of the appropriate size, more desire, as well as a lot of free time. After all, the manufacture of such a craft will be extremely laborious.

Wood keyboard manufacture

It will also require the presence of a special tool for creating internal angular sections and subsequent key engraving. But, as a result, you will get high quality decorative craftwhich will perfectly complement the desktop or any other place of the country house. A rather original idea for its placement will be the inner side of the fence. Any guest will appreciate such a handful of advantage.

Finished wooden keyboard

Crafts from wood and plywood for giving are reflection of your creative start. Working with products in which are invested own ideas And ideas, brings special pleasure. And with a small diurn, its result will always please you and remind you of your own thoughts at the time of creating crafts.

Examples of practical crafts

For such crafts from wood and plywood for your cottage there is a suitable application in the economy. But, along with this, they can also get out beautiful.

A memorable photo can be placed in the hand-made wooden frame. The design of this product is as simple as possible, a plywood sheet of the corresponding dimensions is used as the basis. And for the framing, four small bores will fit.

Frame drawing for photos from wood

First of all harvested necessary materials. The plywood sheet is adjusted for the sizes of photography. Two pairs of thin bores are cut already according to its dimensions. They must be cut so that when drawing into the frame, they are joined.

Dores for the frame must be connected into the joint

After finishing preparatory stage Crafts are carefully processed, so that they become smooth.

Product collection itself is most simple as possible. The plywood sheet is taken vertically, a photo is superimposed on top of it, a small area is also installed at the very top, and after fasten. The compound can be performed using nails or special glue. With the second version, the plywood sheet should be more photos. So all four rusties are connected. The remnants of the adhesive are neatly cleaned. If the bonding occurred with the help of nails, which were covered, then their sharp tips should be beatened so that they could not be injured.

After all these actions, the photo frame is ready. You got a lightweight and practical craft from a tree and plywood for your cottage.

Ready wooden frames For photos

Much more difficult will be the manufacture of a bench for a country site. First you need to decide on its dimensions and an exemplary design. After prepare and cut the required amount of wooden blanks, as well as connecting elements. Thoroughly process everything, paint, varnish and proceed directly to the assembly itself.

Figure photo frame

In the design of this product, you can also include a variety decorative elements, for example, carved legs or a curved back.

Simple and original idea for crafts

The personnel hanger will become a product that simultaneously includes external beauty, ease of manufacture, as well as practical benefits.

Original plywood hanger

For its manufacture, it is necessary to prepare a sheet of plywood approximately a half-meter long, and thirty centimeters height. Next, it is necessary to draw a sketch of the future product. The easiest way it will be done by an application to a sheet of real hanger and circuit of its contours.

Drawing of wood plywood hangers

Next, you have to carefully cut the workpiece, carefully process it, smoothding bends and roughness on both sides. As a completion, it can be applied any inscription. Such a hanger will have a pleasant external speciesAnd also perfectly replace the store option.

Hangers from plywood will add a highlight to the interior of the cottage

Products from such materials for the country area can be made infinitely a lot. And not the same type, but the most diverse, which will combine both beauty and practicality or each function separately. Crafts from wood and plywood for your cottage will become an excellent decoration of a country house or a plot.

Photo gallery - crafts from wood and plywood for summer cottages

Plywood is very affordable, relatively inexpensive material for various crafts. Things made from it can have not only decorative meaning, but also be useful in our daily life, in everyday life.

Plywood is easily processed by building material, which is produced by gluing several layers of veneer, specially treated wood chips.

Introduction

These sheets that can be used for making crafts and structures may differ:

• the number of veneer layers is three-layer, five-layer and multilayer;
• wood breed, of which a multilayer sheet (deciduous or coniferous) is manufactured;
• according to the degree of treatment (polished from one or both sides, not polished).

Construction rates and standards

To learn more about the considered building material (On the classification of the entire plywood nomenclature, the variety of standard sizes), which can be purchased for the manufacture of many products and crafts, it is recommended to familiarize yourself with the following documents:

• GOST 3916.1-96 "General Plywood with outer layers of hardwood veneer".
• GOST 3916.2-96 "Plywood of general purpose with outer layers of veneer of coniferous rocks."

Schemes, drawings and patterns for products from plywood sheets

Drawing programs for computers

Today, without difficulty, you will find the diagram, the pattern of plywood design so that later using automated design systems to prepare any drawing (including the above-mentioned cat). Next, with the help of the plotter, withdraw on the paper sheet of the required format.

Drawing popular programs are easier in development and can be used in 2D and 3D modeling, including for plywood structures:

• "Compass" - a complex of automated systems, with the possibility of drawing up drawings, according to the standards of the Esskdi SPDS series;
• AutoCAD is a two- and three-dimensional automated design and drawing system.

So, if you can't find a detailed drawing of the products you need from plywood material, the applied capabilities of the given software will help you make a full drawing according to any schemes and patterns laid out on the Internet.

Kayak

The price of the construction plywood, from which the kayak is made is simply incommensurable with the pleasure that a person will receive, who made it with his own hands, loving water rides on rigorous boats.

Kayak in Eskimos, this is the same kayak at Aleutov - the traditional rowing boat of the peoples of the Arctic. Such a boat can be a single, double or triple. We post the kayak drawings from plywood for one person.

The algorithm for the construction of a rowing boat from plywood sheets in principle is common, with the exception of some nuances. Step-by-step order Refrigeration, processing and assembly of kayak can be viewed on the video in this article.

Plywood table - simple and functional

The clear drawings of the table of plywood with their own hands, which will be easy to implement even a person, without special carpentry skills and experience. Table lid (1 sheet) - 1300 x 600 x 16 (mm) Inner wall (1 sheet) - 1170 x 400 x 16 (mm)

Plywood designer

Different drawings of the plywood designer are now gaining more and more popularity. Assembling such models from safe material Very useful lesson for children, teenagers. Such crafts will become good instances of collections, will decorate the corner of the modellers.

Tank

Stages of work on the installation of the tank model are as follows:

1. Plywood is grouhed (first the medium-sized, and then fine-grained skurt);
2. Drawings are neatly translated through a copy-grained abrasive plywood material with fine-grained abrasive.
3. In the corners of the contour translation, drill drill through holes (3 mm and more drill);
4. Fasten the pink in the jigsaw and start drinking the tank elements;

Note!
Drinking parts should be started inside the loop of the tank blanks, and only after the contector itself.

Tip!
During the assembly of the plywood nodes of the model, you have various types of nicks at any time to fit the items to each other at any time.

1. After fitting all parts, it is possible to start their gluing (for example, PVA glue, "Titan");

Tip!
So that the nodes and elements of the tank are stronger and more reliable to grab each other, it is possible for a while after their gluing, tie into a thread or rope.

1. Cannon can be done by circumcalling a wooden handle of a tassel for watercolor paint or from another utility material;
2. If you wish for a tank, or on any other model, you can apply the onboard number or other inscriptions and patterns;
3. For greater preservation and decorating the model, they can be covered with varnishes and paints.

Machine - Retro (old "Mercedes")

Note!
When you transfer these drawings of the car from plywood with your own hands on the plywood sheets themselves, do not forget to move and numbers.

When assembling the model itself, look at the numbers carefully.

In this case, the process is carried out according to the following algorithm, in accordance with digital notation:

• detail or node under number 1 must be connected to another number 1;
• and the item under the number 2 is mounted, respectively, with the following number 2 and so on, while the machine will not be collected.

Pistol

Drawings of a pistol from plywood models "Bulldog". When assembling, we observe the same rules as when assembling the car: the same numbers must be mounted with each other.

Tip!
This pistol model is better to cover from the vial of spraying paint, for better similarities with the original, the black paint layers can be applied.

Dinosaur

Dinosaur drawings from plywood, for example, presented below, can be performed when designing to perform in any, scale you need to presented in the drawing program for a computer.

Preparation of material, model elements and the assembly itself does not differ in difficulty, but you will have to stock up with some patience when working the logging and fitting the model nodes to each other.

Salnament - "Vintage leaves"

This object in the form of grape leaves is always useful in the household in direct purpose - for napkins and for storage, for example, paper sheets of the selected format:

Vase, stand under pencils, handles, brushes

Drawings of vases from plywood, which can be easily cutting over the sample you need:

Plywood Punk

It is the ease and simplicity of drinking fuel from plywood sheets of various configurations with different sizes, installation of them of various structures, allows you to perform multiplicate decorative panels For the walls of our housing. Any panel made carefully is a great gift to relatives and familiar people.

Drawings Panels from plywood, which also performs the role of a shelf in the household:

Some useful advice And warnings:

• When transferring patterns, the drawings on the phanee use the thinnest and sharp stiffel of the pencil. It is even better to use the used ball handle, then the lines will always be the same, and the copy paper from the ball does not break. It is convenient to carry the drawings on the phaneer using a laser printer.
• For better fastening of parts, where it is possible, it is recommended that the width of the grooves match.
• There are two types of pylons with large and small cloths. Newbies will be more convenient to learn how to use a thick filling, and finely drink minor details, already having some experience and skills to use the jigsaw.
• Pilking should cut from above - down, so pay special attention to the proper fastening of the peel in the jig.
• Pilking can easily break, so sawing carefully, do not allow the partitions on the saw blade.
• By purchasing a popul, see that the cloves are sharp, and it should not be easily bend easily, but on the contrary it should be solid. It is convenient to work not flat, and the so-called "twisted peelings" - they can be made in any direction.
• For those who saw the designs from plywood sheets - a hobby, there is no need to purchase a ribbon saw, it is enough to purchase an electrolybiz. Although everything is an amateur, some masters still often resort to manual jigsaw when "it is necessary to feel the material."

conclusions

1. Before choosing, acquiring and direct work with the material, from which you will cut the models, panels, designers and designs. Check out its views, classification for construction documents (GOST).
2. For drinking, purchase a high-quality tool, equipment and snap to it.
   
3. Speakly approach the choice of high-quality plywood. Do not limit it to its visual inspection, tapping it on the subject of internal voids and bundles, due to poor gluing layers of veneer.
4. Before the work itself, the jigscription optimally equip your workplace. Special attention is paid to its good lighting, so that the cut is perfectly visible, markup and not tired. Not bad to illuminate the place of work with a jigsaw apply a strobe. Comfortable and comfortable sawing!

IN modern interior Increased distribution, natural materials are obtained, perfectly fit in trend eco-style. Until recently, the permanent leader among them was wood, but today it is actively tested by Plywood, which has become a favorite material of designers. It is easier to work with it, giving any desired shape, and some simplicity can be compensated by originality. On how to choose the material, you can learn from the article, and in this selection there are some interesting ideas for lovers to make something useful.

Universal storage system

As the basis - a sheet of plywood, in the example is rectangular, but the form may be, any. If you do for a nursery, it is worth choosing something thematic. You can change not only the form of the base, but also the quantity, and the location of the shelves and hooks.

Through the through holes in which wooden pins are inserted, shelves are stacked on them, and they are used as hooks. In the original embodiment, the following elements are used:

• Plywood sheet 110x65 cm, 2 cm thick.
• Wooden rapid pins, 16 cm long.
• The board is 1.5 m long, 14 cm wide.

The mounting holes in the sheet are symmetrically, the indentation from any edge is 10 cm, between the holes - 15 cm, the 7 rows of 4 fasteners are obtained. The diameter of the holes depends on the thickness of the selected string minus millimeter, so that the pin can enter the tight and began to "walk" with humidity oscillations. The holes are drilled along the pencil markup, the edges are processed by sandpaper, the edges of the pins after cutting are also cleaned with sandpaper. In the holes fasteners are inserted by 2 cm so as not to perform as the basis. The board is cut into three parts - 2 at 55 cm long and the remaining segment 40 cm, the edges are grinding.

Depending on the intended filling, the shelves can be fixed to the base and fastening the joinery glue, but then they will be static. And you can simply install and change the location of the shelves and hooks at will.

Stand / Paper Holder

From plywood waste, you can collect an original holder for various receipts, papers and a pair-triple pencils or handles, so that you are always at hand. The decorativeness of this organizer is provided by the curved form of the elements, and for its manufacture, the simplest set of tools and a certain sequence of actions will be required.

Preparation

Since the organizer does not require special strength, fine trimming (4 mm) of any variety of plywood, rectangular shape will be suitable. Dimensions arbitrary dimensions, let's say a small scatter of sizes, the author of the crafts of rectangles with a side within 20 cm. The number of boobs is also not critical, in the presented version of their 16 pieces. To remove roughness and show the drawing, the blanks on both sides are cleaned with grinders (p 120).

Forming

To bend quickly and without any problems, it must be displeps, and optimal option - "water bath". If there is no special fixture, the saucepan with boiling water is suitable, into which the colander is placed, it is put on the edge into it and covered with a lid. On average, the plywood begins to be well stuffed after 4 minutes of stepping, if it does not give in, time is increased. Since the sheets will be hot, you should not take them with your hands. From the barark, the blanks are removed alternately so that they do not have time to cool before processing.

Boots with hands, taking with dry rags from two ends, neatly squeezing until the arc succeeds. The radius, as well as the size, may not coincide exactly, more or less than the same blanks, curved stronger than the rest, are needed to the edges, for the middle part there is quite a completely small bend. When the arc is formed, the workpiece must be delayed in one position for a few minutes so that it cooled a little and fixed in new formAfter forming, all elements must completely cool.

Assembly

When assembling, the most curved pieces are left for the edges, the middle put more even blanks in the middle, until a stack is formed.

To drill holes for fasteners, the stack is clamping into the clamps and drill two holes at the edges.

Two metal studs with threads, lock nuts and washers are used as fasteners. Nuts are screwed on the studs, the washers are dressed, the first sheet is rolled up, on top of two washers and the next sheet, the last sheet is fixed with a washer and nut. To evenly clamp a stack, the washers are twisted at once from both sides (wrench or divorce keys).

If necessary, the remains of rods are cut. In the fixed stack drill the lower holes for writing accessories.

To increase the decorativeness of the organizer, before assembling the workpiece, one can be covered with colorless or sample varnish.

Plywood is a wonderful material for those who love to do everything with their own hands. And we are not at all about the repair of the floor or walls. And about various household things for home, accessories and crafts. Which of some masters are so much original and beautiful that sometimes they even surprise it. Therefore, even a gift to present such things is not ashamed. And what can be done from plywood, we will tell you and show you on the examples.

Stands from plywood

This is one of the few things that can be filled with your own hands with a jigsaw of a small piece of plywood. Stands are designed to make a person's life more comfortable. For example, a plywood laptop stand, as below on the first photo. It is capable not only to bring comfort, but also to keep health, because with its help you can work in different positions and not only sitting, but lying and even standing.

And the Option on the second photo will not only make a job for a comfortable laptop, but also will save the device from overheating.

Will cost these things not expensive if they do own hands. After all, Plywood is not much money.

But the stand under the bowl will make a comfortable life of pets. Simple design and availability of material allows you to implement everything quite quickly.

For children from plywood, you can make this creative stand for the handles and pencils. The product is so much original that the child is unlikely to pay attention to what it is.

And so that the phone, keys, charger and other little things have not been crushed throughout the house, this is such a thing from plywood will help support order. When everything has a certain place, always easier and faster find the right thing.

As you can see a lot that you can do from trimming plywood for home. And here is the following confirmation - this wooden gift is already appreciated by adults. The stand for the bottles is made of very unintegone pieces of plywood, but it looks stylish.

Therefore, if even narrow pieces remain, do not throw them away, it is necessary to dream and above them, it may be possible to come up with something original. Even if you have everything, you can always make things from plywood for sale, because today the hand-made products are in demand and expensive.

Tea storage idea

Tired of keeping tea bags in a packaging box?! Then this house repository will replace it. A highlight will appear in the kitchen and the space with such beauty will be transformed. Such a house for tea will surely enjoy every hostess.

Support for flowers

Human phantation does not have borders, so some crafts from plywood for home are more like a work of art. For example, this elegant stand for flowers in the form of a carriage. There is not enough horses and Kucher.

Watches cut from plywood

A simple round shape, no digits, but the presence of a tree is all this very much for the interior in the style of modern minimalism or eco. They are made with their own hands from plywood easily, it is enough to have an electric or hand jigsaw. And the clock mechanism can be removed from the old people who opposed their clocks, well, the arrows can be cut out of cardboard or out of thin plywood. It is possible to decorate them to your taste with ordinary colors.

By the way, such hours are easy to transform and with the help of burning or decoupage technique. You only need to decide on the picture.

Volumetric paintings from plywood

The author of the paintings, in the photo below, Maria Ostashova. Her favorite theme is pictures of plywood in the style of pop art. Its works are really original and very colorful. It works in the 3D technique. Surely such products require painstaking work. But, as they say, the result is worth it. It is in such things that truly felt the professionalism and love of the author to their craft.

And here is another beautiful work from another workshop. Similar aesthetic paintings from plywood can not do not like, so they can not only decorate their interior, but also boldly give. The main thing to choose a suitable topic.

Panels from plywood

Walls can be decorated with pictures, posters, and you can make 3D panels. Of course, it will be done very difficult to do in the photo, especially manual jigsaw, and it will be very decent. But this idea can be embodied on a smaller scale. You only need to prepare the drawing by which templates will be cut.

Piggy banks are different, but we present to your attention an unusual - a piggy bank for bill. If you copy to own house, That is such a symbolic and beautiful copy not only to accommodate the desired amount of money, but also reminds of the goal and will surely motivate its achievement.

Thus, you can make it yourself or under the order to make and a reduced accurate copy of the project's project about which you dream and literally start investing money into it. Is not it interesting idea!?

What can be filled from plywood for home yet?

If you were very inspired and fascinated by this material, then why for own house Do not make I. doorknobs. This is the very case when even the smallest pieces of plywood will go into business. Handles can be made like double-sided and one-sided.

The mirror in the bathroom or the hallway with the participation of plywood is also easy to make. The main thing is that it is necessary to make from plywood in this case, this is the basis for which the mirror itself will be attached. Well, then the decorative lining is cut out of it. Here as they say - that comes to mind.

Furniture from plywood for the house is today popular due to the great interests of the Hand-Maid of the Industry. More and more people try not to buy standard cabinet furniture, but they make it yourself. Such a creative expression is also useful also to the preservation of the budget.

For example, none in the furniture store does not find such a creative horse in the form of a horse like this one.

Some ideas of furniture from plywood are incredibly complex, others differ in their laconic simplicity. As a rule, in the first case, it is the development of professional designers.

Round shelf of plywood, a good place For storage of cosmetics.

Garden Swing Chair

What can you do from plywood yet? Of course, lamps, both for home and for street lighting under the roof: desktop, outdoor, suspended. Plywood products fully compete with the rest of the materials, but they have a unique advantage - they are made of wood.

Not practical but aesthetic

When there is free timeWhy not give in to the creative impulse and do not cut out of plywood something for the soul, such as bird figures and animals. Yes, they cannot be applied almost, but with their help you can fill the house with warmth and fairy tale.

And you can make from plywood figures for giving. This is an excellent alternative to gypsum options. Filling your garden with cartoon characters and fairy tales, you will not only transform the plot, but also greatly enjoy your children.

The designer's work in a broad sense involves the presence of a developed fantasy, the ability to generate creative ideas and embody them in the form of items that have a completely utilitarian purpose. Ease of processing, the possibility of creating amazing things from an affordable and inexpensive material was erected by Faero in the rank of favorites in the medium of many modern fashionable furniture masters and interior items.

From plywood you can make any things: furniture, boxes, decorations, all that is enough fantasy and carpentry skills.

From plywood, you can do almost everything that wanted. From moisture-resistant, even the hull of small boats make it a variety. Decorated with plastic or veneer of expensive breeds of a plywood tree applied in the interiors and how finish finish, and for the manufacture of furniture. Durable and cheap, environmentally friendly material is suitable for making children's toys, design solutions In the design of the garden, drawers for storing products and various trifles.

Manufacturing technology

Types of plywood boxes and wall connection methods.

In order for the product for a long time and looks quite attractive, you need to know the rules for processing the material from which it will be manufactured. Unlike the wood massif, the plywood is thin sheets of veneer glued together so that the fibers of one layer are perpendicular to the direction of fibers in the other. This allows bending sheets in any direction, creating complex forms. But when sawing across the fibers of the upper layer there is an opportunity to damage it. Therefore, when working with plywood, you need to follow a few simple rules:

• to prevent the surface cracking during cutting across the fibers, it is necessary to pre-hold the knife along the cutting line;
• before climbing the nails or screws the screws, drill holes under them;
• under the caps of the fastening elements, it is necessary to place the washers;
• when gluing the surface, you need to clean the skin, apply adhesive with a uniform layer over the entire surface and ensure the uniform compression of the parts connected;
• to flexing the elements, they are pre-wet or sprinkled, after which they are placed in the template and withstand in the desired position at least a day;
• thin plywood (up to 1.5 mm) is cut into a sharp knife, the sheets up to 6 mm thick are cut by a jigsaw, and a thicker disk saw;
• the edges of the sliced \u200b\u200bparts may have burrs when cutting at home, which requires mandatory processing with their file or grinding.

For the manufacture of almost any subject of plywood, a small set of tools will be required:

• a sharp knife, an electrolybiz with a set of saws;
• drill, drill and bit set, screwdriver;
• glue carbon black or suitable for working with wood;
• fIRL, skar sandpaper;
• measuring instrument, pencil;
• fastening elements.

Back to the category

Boxes from plywood

Figure 1. Circuit box of plywood under bed

For training and acquiring the necessary skills to work with new for homemade Masters We need to start material from making the simplest packaging for various needs. In such drawers, you can store tools, photos and documents, various small objects, etc. Dimensions are selected individually based on the destination of the boxes (Fig. 1).

For the manufacture, it will take plywood with a thickness of 6 and 15 mm. From the thin sheet, the front and rear walls are cut, the bottom and the lid of the drawer. The sidewalls will go fastest material. The handle can be made of plywood any thickness depending on personal preference or use a piece of thin bar.

Determine the dimensions of parts, place and cut the blanks. The edges pollute the skin with small grain. In the lateral details, mark the places for the grooves by which the cover will move. The bottom of the box will be inserted into the same grooves. The grooves make a special cutter of 6.2 mm. The drill of 4 mm in the front and rear walls is drilled by a hole for the self-tapping screw at a distance of 7.5 mm from the side edges.

The assembly of the plywood box is performed in the following order:

The assembly of the box is made by self-drawing and glue.

• lubricate the side walls with glue, attach and attach to them on the rear wall on them;
• load the groove with the groove for the bottom of the box and put the desired detail there;
• on the glue and self-drawing, consolidate the front wall;
• place the lid in the grooves, check the ease of movement and, if necessary, pollute the sliding surfaces;
• print the handle or secure with screws from the bottom, with the inside of the lid.

The finished product is polished once again over the entire surface and cover with paint or varnish to protect against moisture. If you wish, you can decorate it in any available way.

Back to the category

Mini-dresser for trifles

Collect a mini chest of plywood for storing small tools or other little things.

From several plywood boxes, you can collect a mini-comed room for storing handmade details or small tools, nails and other little things. The boxes for the mini-dresser do not need a lid, so it will be necessary to place and cut only parts for the walls and the bottom. For convenience in the details of the front wall make a small recess handle. The assembly of boxes is made as indicated above.

Determining the quantity and size retractable boxes, You can calculate the size of the chest in which they will be placed. The height of the side and back walls will be equal to the total height of all boxes with the addition of the total thickness of the partitions between the floors of the comed. The width of the sidewall should be a few millimeters more than the length of the box so that in the closed state he did not play the front wall. The bottom, the cover and partitions are determined on the basis of the length of the box (the width of the shelf) and the total width of all boxes at the same level with the addition of several millimeters on the gaps between the boxes.

The walls of the chest, the bottom and the lid are performed from thick plywood (15 mm). Connect, as in the previous case, on glue and self-tapping screw, forming first the case of the chest. After that, the shelves are installed on the desired distance from each other (the height of the box). The final stage will attach the rear wall.

Back to the category

Furniture

Figure 2. Chairs and sofas from lamellas are harvested from equally dug details.

Minimalist furniture is becoming increasingly demand due to a relatively low price. Modern designers Already long ago paid their attention to the Faneru as a material for its manufacture. You can highlight 2 main types of plywood furniture:

• items collected from lamellae;
• furniture-puzzle.

Designers of J. and L. Dresslers are made of birch plywood elegant openwork furniture, which can be done by even a novice master. The secret of the designers is that their armchairs and sofas are collected from many of the elements repeating each other (lamella). The surfaces of the backs or seats are formed by the edges of the lamellas. Thanks to such technology, curved parts are not required for the manufacture of furniture. The lamellas are cut down on the template and are assembled in a certain order on the threaded fasteners (Fig. 2).

As can be seen from the drawing, the chair consists of 3 types of parts: the back and seat, the base and the parts connecting them. The bench is assembled from the same M-shaped parts, which are deployed in relation to each other and are interconnected in the seat area. Metal studs with washers and nuts are used to fasten the parts.

In order to make such things, you will need to draw the subject of the furniture of the desired configuration and on the lateral projection to draw the outline of the slave. Enlarge image to the desired size, transfer it to the paneur and cut the parts. Their amount depends on the plywood thickness and the desired object width. It must be taken into account the gaps between the slats. If the parts are fixed entirely, then between them on the fastening heel, you can wear chips from the same plywood for the formation of gaps. In the case of assembling furniture from parts similar to those shown in the figure, the gaps are formed as a result of placing the ends of the lamellas of the same type between the elements of another type.

It is important to drill holes under fastening strictly on the same place on each detail.

Figure 3. Template for stool and table.

To do this, use a template with holes that are applied to each lamella, setting exactly all the locations of the holes. The assembly is produced by putting on the heel alternately.

An option for such furniture can be objects made of two side lamellae, rigidly bonded with studs. Between them in the transverse direction on the self-tapping and glue, a row of planks or one-piece details of the seat, backs or countertops are fixed.

The team furniture is able to make even a person without a joiner. You can develop parts schemes yourself, if you understand how it combines the details of such a designer. In fig. 3. The charts of the chair and the table and the finished products are shown, the details of which are held at the expense of propyl, where they are inserted.