Almost every person at least once in his life tried to emboditive soap bubbles from the girlfriend (most often in childhood

We note a few things for yourself:

• the magnitude of bubbles that people call big greatly fluctuate for different viewers (most considers 50-60 cm in diameter with something from the exotic area)
• the size of bubbles depends both on the composition and to no less from the design and materials of the devices, as well as the mastery of a person.
• in the internet on different honeycomb sites, both under the carcake are written with a dozen primitive recipes based on dishwashes, soap, glycerin, and other remedies with which it is indeed, you can easily score bubbles from half the meter in diameter that most people consider it large.

But for whom such sizes are poorly looking deeper! Universal recipe you are unlikely to tell you, in any case you will have to experiment with concentrations.

For those who crave really huge bubbles, a few meters in diameter we will give an important hook-this water-soluble polymers, that is the secret! Glycerin and sugar of course help (without them difficult), but only before a certain concentration - if higher, it becomes worse!

Try gelatin, egg white, Polyvinyl alcohol, etc. But best (and this is advised by many professionals) - cellulose ether (propylmethylcellulose hydroxyethylcellulose hydroxyethylcellulose) or accessible to all CMC. With gelatin, it can also work very well.

The remaining additives is a matter of taste and the goals set. Experiment, and you will succeed!

As for unclean glycerin, do not be afraid, most often in pharmacies, it is simply diluted with water to 70% concentration in order to save and deceive the buyer ...

Cellulose esters are absolutely not dangerous for health (we often eat them with ice cream, sauces, sweets and pills ...) Unfortunately, it is not so easy to get pure hydroxyethylcellulose in small quantities for a tour trip, but it is quite available to products that contains it in sufficient quantities .

Here is the simplest recipe of bubbles from which the children will be delighted:

(Please note the composition is given in grams! For glycerin, etc. Additive density is not equal to one, everything must be weighed!)

• Fairy - 150g (better to take with yellow or green color)
• Glycerin (99%) - 50 g or 70g -70% of the pharmacy
• Gel-lubricant - 100g (or 0.2 g quality KCM - the thick and more transparently the resulting gel that is better)
• Water up to 1 kg

Cooking: Gel-lubricant or CMC Carefully and slowly without whipping Mix with glycerin, add Fairi, bring to 1 kg warm (almost hot) boiled water (ideally distilled) after cooling the composition is ready for use.

As an inventory for allowing bubbles, the knocker is perfectly suitable (internal rings and patterns are cut off with a hot knife, leaving only an external hoop with the handle). The handle is heated near the hoop itself and bend under 45grad. To make more convenient to scat in a bowl with mortar. The rim from the knocker tightly across the circumference is cut off not by thick hb rope to hold more solution.

The solution is very sensitive to the presence of fatty pollution, dust and TP, so be bothering its cleanliness (pre-wash the basins, hands, inventory ...)

Pleasure is guaranteed!

this is a basic composition ... You can add different additives in it, I still improve it, but each additive has its own ...

By the way, besides Fairi, there is little suitable for normal bubbles, so take only it - already a proven version! If you get pure hydroxyethylcellulose, then the dosage is the same as for CMC (0.2g per liter of solution "+/-" 0.1 g) - the dosage should be clearly observed, because if it is a multiple bubble, it will be bad and quickly burst.

Polyvinyl alcohol is different by viscosity and method of dissolution (soluble in cold and hot water). The percentage of it as well as for CMC varies within the limits of the tenth gram per liter of the solution, and how much exactly should be selected for each brand separately.

It is recommended to make a 10% PVA solution in water (so it is easier to dose): Heat the desired amount of water to 80-90 degrees in a water bath, quickly stirring falling asleep PVA in water without allowing sticking of the granules. With constant stirring on a water bath, the granules dissolve in 20-40 minutes (depends on the brand and size of the pellets).

Store the resulting solution in the refrigerator, because It is affected by microorganisms, or prepare small amounts immediately before use (more preferably, because some PVA grades during solutions are stored, especially in cold conditions change the ultimate viscosity and properties).

Having a base composition for bubbles, the method of selection gradually increasing the concentration of the PVA, easily find the best option.

In fact, there is a wiki on giant bubbles and a bunch of open recipes. Even on YouTube there. by keywords giant bubbles.

Composition close to Jamble Juse and other. That is, Ferie, water, PEO and PEC and specifically: POLI-OX (polyethylene oxide) and Natrosol 250hhr CS. The problem is different. It is impossible to get stable results. The same composition is that no. Depends on the heap of conditions and location of the stars. In addition, modern Ferie is redirected in thickeners.

How to inflate giant soap bubbles

First we make a soap solution. We will need: some container. Water (1 l.). Detergent (for example, fairy) or shower gel (for example, Palmolive) (150-200 ml.). Some glycerin, which can be bought in pharmacies (25 ml.). (Optional) Personal lubricant, not on an oil basis, which can also be bought in pharmacies (25 ml.). Two sticks of any size, but for certainty, let them be 30 cm. Cotton rope, about 50 cm.

In order for bubbles to be durable, water should be soft, better if it is distilled. Heat the water and pour it into your container. It is better to use such a container that there will be a wide cover so that you can freely omit our rally. If you use a glass container, remember that hot water should be poured into it gradually, warming the wall of the vessel, otherwise it burst. How easy to inflate bubbles depends on the set of parameters, in particular, from humidity in the area where you live. Therefore, if you want to achieve the perfect composition, pour the shower gel into the water with several portions, after checking every time, whether your solution has improved. If you are impatient, you can immediately mix 150 ml. Gel with water, bubbles can be inflated with imperfect. Add 25 ml to a solution. Glycerin and 25 ml. Lubricant (you can do without a lubricant) and stir well well. Make sure that when stirring, foam has not formed. If she still appears, it can be removed by a spoon. Check the solution, inflatable bubble through the tube. Do not worry if bubbles are so far from ordinary. The secret of huge bubbles consists not only in the recipe of a soap solution. You can add gel or other ingredients if you want to experiment.

Now you need to make an inflore device. It is two sticks, between which the rope is tied in such a way that it forms it to form a triangle. Inflatable bubbles are best on the street in a windless weather (or with a weak breeze). Lower the splashing device into the solution, then lift it up and start moving back. The resulting air flow inflates a bubble. Have fun and feel free to experiment!

Secrets of creating large soap bubbles

1. Composition, larger recipe soap bubbles (BMP).

The main components are not secret for a long time. In Europe, this is Fairy liquid soap, I use non-concentrated, preferably without perfume additives (but it is not necessary), 10% of the volume from the solution. In America, use soap brand DAWN. Glycerin - 5 - 10% of the volume of the solution. Polymers. I tried various and stopped at the J-Lube Gleitgel Pulver. This PEO is very high (important) molecular weight. 1 - 1.5 grams of powder per liter of solution. With this polymer, the stool inflates and will fly. As well as some additives that improve the solution. More details read on the SOAP Bubble Wiki Ingredients website (you need to translate from English a dozen words or drive text to one of the Internet translators). This is the best variant. I want to add. Water take a pretentious, and not from the nearest well. A FAIRY present, and not spilled in the basement around the corner.

2. Why are bubbles do not work?

You bought an expensive factory overseas powder or a solution from local professionals, but there is no puzzar. And it does not inflate. Because most often we do not have instructions or concepts in this, not quite a simple matter. Usually people want to please themselves in a warm, sunny day. And for a normal bubble, a temperature is desirable not higher than 20 °, no less than 60% and shadow. Bubbles do not tolerate high temperature and dryness. More than 50 different appears in Youtube show that conditions or created or are suitable. I conducted experiments with various solutions only in the morning. However, if there is a good solution and the correct tool, and most importantly - experience can be surprised by children and acquaintances in the worst (for bubbles) weather conditions.

3. The tool is important.

You will find samples in YouTube. The triangle for running bubbles should be made of natural, moisture-intensive material. Wool, flax and others. Use a triangle divided into four sectors. What does it give? There is a complex of small flicker bubbles, each of which is more biased. The stocking is obtained up to two to four meters long and existed up to 5 - 7 seconds after the separation, which is enough to admire, and for children - to pierce it. In the unfavorable (for bubbles), the weather can be used with a rope with 5 - 8 small triangles. It turns out small but more stable bubbles and a lot. But experience is required. All tool, of course, homemade.

How to make giant soap bubbles

To obtain soap bubbles of large size or multiple bubbles, film-forming formulations are used - solutions of surfactants in compositions with alkanolami high molecular weight additives and electrolytes. In these compositions, water, glycerin, glycols, polyglycols and other liquids, as well as mixtures thereof, are used as a solvent. The use of non-aqueous solvents having a boiling point above the boiling point of water allows to improve the colorfulness, stability and elasticity of the film. The content of water in the composition is usually within 10-99%, the content of non-aqueous solvents can reach up to 90%. As a surfactant, an anionactive surfactant is used as partial and secondary alkyl sulfates, alkyl sulphons and anionactive derivatives of non-ionic surfactants, for example, hydrogen-based alkalolanes, in which the hydrogen atom is substituted for the -OSO3NA group. The quantitative grip content is 0.2-10% by weight of the composition. To improve the consumer properties of the composition and make the composition of the necessary viscosity and elasticity of the film, primary and secondary alcohols with the number of carbon atoms N \u003d 8-15 or narrower fractions are used as additives to surfactants, for example, with n \u003d 12-14, as well as soluble in The composition of high molecular compounds, in particular cellulose derivatives - methylcellulose, carboxymethylcellulose, hydroxyethyl cellulose, etc. The content of alkanarols and cellulose derivatives is 0.1-2% by weight of each.

Various salts that change the solubility of surfactants and other components of the composition, or (s) are used as electrolytes, and the stabilizing pH of the surfactant solution and affecting the viscosity and surface tension of the film. The concentration of electrolytes in the composition can reach up to 30 wt.%. In addition to these components, the composition usually contains a preservative.

Example. The film-forming composition of blowing soap bubbles contains, in wt.%:

• Water - 47.
• Glycerin - 47.
• Sodium alkyl sulfonate - 4.5
• Sodium tetraboy) - 0.7
• Methylcellulose - 0.5
• Mix of alkanov n \u003d 12 - 0.2
• Preservative - 0.1O.

Recipe How to make soap bubbles for the show

• 15 parts of distilled water
• 0.5 parts of Glycerin
• 2 tablespoons of lemon juice
• 1 tablespoon of soda bicarbonate
• 1 teaspoon J-Lube (J-Lube - concentrated grease for sex in the form of a powder, which consists of 75% sucrose and 25% of polymers)

Second recipe

A little different proportional composition for soap bubbles:

• 12 parts of distilled water
• 1 part of the liquid detergent "Fairy Ultra"
• 0.5 parts of Glycerin
• 0,25 hours of polyvinyl alcohol
• 2 teaspoons of Metylan's glue (see the photo below)
• 1 teaspoon J-Lube

Third recipe

We need: 6 cups of distilled water, half a cup of gel for washing dishes, Hollows of corn starch, 1 tablespoon of the bakery powder and 1 tablespoon of glycerol.

Experience: in water, dissolve corn starch, interfer the remaining ingredients. Let's hinder well, but we try not to create a foam. We leave alone the mixture for about an hour. From the primary items, we make the framework of any forms to make a liquid.

What happens: our bubble can live for some time and swell to huge sizes due to surface tension. However, it is simply from the water to make a bubble will not work, you need to increase the surface tension using different additives.

Large soap bubbles. Recipes

How to make large soap bubbles.

Soap bubbles in childhood who just did not indulge. Running them with a straw or tube from the balcony. However, time goes, progress is moving. And on the Internet, (rarely on the street) you can see the show of soap bubbles or just huge bubbles. Soap bubbles of up to 2 meters or bubbles in 2 - 4 meters are overflowed with all the colors of the rainbow, flashed in the sun, leaving an unforgettable impression. Adults become children for a moment, and children rejoice.

Is it possible to make big bubbles? It is possible, but it is not quite a simple matter and requires not only money, but also time. And if the case with money can be solved, then with patience and time - not always.

Let's start with recipes.

Look in the Internet, asking for soap bubbles in the search engine and you will find hundreds of recipes. The majority of them are repeated, godlessly rewritten from each other. A dozen two remains in the rest. Turning to gram, they often be monstrously different.

However, the overall pattern is visible.

1. The solution is simple.

• Fairy detergent (SPÜLMITTEL) - 150 - 200 ml. (You can try to replace Fairy, but the result may not be better.)
• Glycerin (Glyzerin) - 25 - 50 ml. (Increases the durability of the soap bubble).
• Sugar (Traubenzucker) - 1 tablespoon. (Sugar and glycerin can be replaced with sugar syrup. However, if there is a mousek or wasp, I would advise using a little more glycerin, without sugar.)
• Gelatine (Gelatine) - 1-2 teaspoons of a solution from the next recipe.

Under the conditions described below, this recipe gives small, reliable bubbles.

2. The budget recipe, giving enough large bubbles.

• Water (DESTILERTES WASSER) - up to 1000 ml.
• The detergent FAIRY (SPÜLMITTEL) - 100 - 120 ml. (In a majority of 10% of the amount of mortar).
• Glycerin (Glyzerin) - 30 ml.
• Sugar (Traubenzucker) - 1 tablespoon. (I used grape sugar, but it is not necessary. Sugar can be replaced with griterin, and glycerin and sugar - sugar syrup.)
• CMC melting solution (TapetenKleister) - 100 - 150 ml. (Local glue CMC - on the packaging is written - the composition of CarboxyMethylcellulose - or sodium salt of this substance, known as the food additive - E 466. So - a teaspoon without a slide to dissolve in 300 - 400 milliliters of cold or warm water and during the day several times Mix to complete dissolution. 100 - 150 ml of this solution and use. The solution is stored 4 - 5 days, no more).
• Software solution (gelatine) - 2 - 3 teaspoons. (3 grams. Gelatin dissolve in 50 ml of water in a water bath. Davop cool, add to solution. Start with 2 teaspoons. Gelatin improves soap bubbles, but when you enjoy you get jelly.)
• Gelatine (Gelatine) can be replaced by a small amount of Xanthan Gum (food additive E415 - xanthan gum).

Under the conditions described below, this recipe, by me the tested, gives, depending on the tool used - the frame - the triangle, stable soap bubbles up to one and a half meters.

This solution is not stored. (Glue can lose viscosity, and sugar and gelatin - spoil). After 3 - 4 days after it is better to pour.

You can experiment a little with a solution. The number of glycerin can be doubled. If you use a little more gelatin - you can reduce the number of melting glue of CMC or vice versa.

3. Third mortar, for bubbles.

• Water (DESTILLIERTES WASSER) - up to 1500 ml.
• Washing medium Fairy (SPÜLMITTEL) - 130 - 150 ml. (10% of the amount of solution - optimal)
• J - Lube Pulver - Lubricat - 1.5 - 2 grams.
• Glycerin (Glyzerin) - 50 - 100 ml.
• Food Soda (Backpulver - Natron) - 1.5 - 2 grams. per liter of solution.
• Lemon Acid (Zitronensäure) - 1 gr. per liter of solution.

To reduce the fluidity of the solution, you can add up to 0.8 grams per liter of the Xanthan Gum solution (E415 food additive - xanthan gum) or gelatin.

Under the conditions described below, it is the best and more common solution, a chemical that is creating in this solution of wonders - a polymer, which makes up 25% of this powder - Poly-Ethylen-Oxid (PEO) or (PEG-90M) with a molecular weight of more than 35,000. The remaining 75% is a sucrose that does not allow the polymer to stick together and improves dissolution in water. The relative of this polymer is Poly-Ethylen-Glykol (PEG) - with a smaller molecular weight, not so effective.

J - Lube Pulver - dissolve in a small amount of water in the maximum frozen jar in the microwave, as it has a bad property to foam like milk and run away. It can be dissolved in a water bath and even in hot water, which will take more taking. Wash your hands and dishes easily water or dry cooking salt. Banks of this powder - 284 grams will enforce at least 200 liters of solution. Therefore, at a price of 20 euros per bank - the price of a liter solution will be small.

The amount of lubricat, soda and acid must be quite accurately observed. Weighing can be asked in a pharmacy or on simple homemade scales, using 1, 2, 5 cents or a penny as Garek. Food soda and citric acid are dissolved separately in a small amount of water, sodium citrate is obtained, and then added to the solution.

With soda I. lemon Acid Soap bubbles are better.

Replacement Fairy to another detergent worsens a solution. Americans use their liquid non-accurate or concentrated liquid soap - Non-Concentrated Classic Dawn and Dawn Professional and others.

Any solution will be better if after cooking a day will stand in a cool place. Two - three times it costs to prevent well. In total, for a small party with children and adults, it can take up to 4 - 5 liters.

Possible polymer replacement (PEO) or J - Lube Gleitgel Pulver, but not always equivalent - "Macrogol" - E1521 (PEG) with the highest possible molecular weight (it is possible to 3-4 times more than J-Lube). As well as Dow WSR301 (PEO), Hydroxy-Ethyl-Cellulose (HEC) - Natrosol-250 HX, Dow Cellosize QP100MN, KY Gleitgel, KY JELLY LUBRICANT, SYLK GLIETMITTEL GEL, HYDROXY-PROPYL-METHYL-CELLULOSE (HPMC) - E464, SurgiLube, HPMC K15M (Dow), Methocel-Cellulose Ethers. Information about these chemicals is on the Internet, and the dosage of these polymers can be found on English-speaking sites, asked in the search box - "SOAP BUBBLE", "Ingredients-Soap Bubble Wiki", "Bubble Formula", "Bubble Magic".

You do not know English? It happens. On the Internet there is a dozen public translators. With English, they translate badly to Russian, but it is possible to deal with the recipe.

More than 50 original appearances are in Youtube. You will find them by setting in the search box - "show soap bubbles" or "Giant soap bubbles".

With the amount of substances in recipes, you can experiment.

Now about the important.

Safety.

Do not run soap bubbles in close roads with car traffic. Children or Sabaki can run behind the bubbles on the road. Man driving can look at soap bubbles and enter not there. It is fraught with big trouble. The remnants of the bubble that fell on an expensive suit, although they will not spoil it, but can lead to the scandal. In the room on the floor, where soap bubbles are inflated, be sure to steer the film. Washed the floor from the solution will not be easy.

The conditions under which solutions work.

Film soap bubble fine. And therefore it is very sensitive to humidity (or dryness) of air. In good, dry, sunny weather bubbles often do not inflate and immediately burst. And no, even the most secret, even the most expensive solution does not help here. Inflatable soap bubbles are better in the windless or with a weak breeze, non-jarous, wet weather. In the morning or closer to the evening. Better in the shade. Good turns on the seashore or river. After the rain or even if a little bit dripping.

Air humidity can quickly fall. It is important that the air was clean, without odors and dust, midges and fervent trees. Although, for some reason, the garbage that fell into the solution - often does not interfere. However, driving a moped nearby, Nadymiv, can stop your experiences. The room should not be a draft or working air conditioners.

Water for soap solution must be distilled. After checking the resulting solution, you can experiment with local water.

The instrument you make bubbles are important. Without a good tool, no experience and skills should begin to demonstrate to friends. An inflation device consists of two sticks or bamboo sticks (or fishing rods, between which a rope is attached, forming a triangle. The rope is better to use from natural material - wool, cotton or flax, like more moisture. These materials accumulate more solution. The rope can consist of several Threads with a total diameter of up to 4 or more millimeters. Rings with a handle It is advisable to invise a woolen or other thread.

It is interesting to use a fan for inflation bubbles. It is generally known, but not everyone knows that the wet air at an equal temperature is lighter dry. And in the weather with a small humidity, the wet air should raise a bubble. You can try with a fan to use a hair dryer for drying hair, filling a soap bubble with warm air. Carefully looking at Youtube Vicked - Show bubbles, you will discover many secrets. For the most advanced, not bad to put a notebook, where to write the composition with which you are experimenting now, the weather is the presence or absence of the sun, the time of day, humidity (it would be nice to have a hygrometer or a psychrometer. Measure Humidity is needed, of course, on the street.), His wind and direction. (In the morning it happens blowing down the slope up, which makes uncomfortable launches). And also note the approximate diameter of the ball, the length of the stocking and the time of the existence of a soap bubble.

However, the main secret and the basis of success is invested, in this exciting business, your time.

In the family where there are little children, is very acute the question of buying all sorts of toys, which constantly break, fighting or deal with intelligent tea. Even when it comes to buying soap bubbles, any parents know: jars with a soap liquid for an active child will have enough maximum half an hour. After that, you need to run to the store again to please the kid with multi-colored soap balls. However, you can use a simpler and easy way to solve the problem if you prepare a liquid for allowing bubbles yourself. Most recipes that are suitable for use at home do not contain dangerous or expensive components, the main part of which is always found in the kitchen or in the bathroom. Plus, the liquid for soap bubbles is perfectly stored in the refrigerator, so it is necessary to take care in advance that it is always at hand in sufficient quantity.

We all tried to let soap bubbles in childhood, using shampoo for these purposes, which was necessary to dissolve water. The charm of such a recipe consisted in the simplicity of the preparation of a soap mixture, which, however, had its drawbacks. After 10-15 minutes, the bubbles simply ceased to blow out or instantly burst. However, if an extraordinary situation has developed, and the child must urgently distract with something, then such a recipe for soap bubbles is perfect. In any case, the baby will be able to calm down and switch his attention to overflowing balls instead of considering the broken knee with horror.

Soap bubbles with glycerin

However, experienced soap bubbles starters are aware of what the main problem is how to achieve the longest period of their "life". Well, at least such that allows to achieve the fluid of industrial production. And in this regard, an indispensable assistant is glycerin, which allows you to make the walls of soap bubbles more durable. As a result, some recipes give a truly striking effect when bubbles, successfully landing on the asphalt or any other relatively smooth surface, form a semicherele that does not burst for 10-15 minutes.

On the basis of glycerin at home, you can create several types of soap bubbles. If necessary, so that they get small and not particularly durableIn this case, in this case, you can take about 100 ml of any means for washing dishes, it is pretty mixed with 300 ml of warm water, and then add 30 ml of glycerin. Then it should be thoroughly mixed all the ingredients, after which you can safely arrange the show not only for children, but also for adults. Those who expect to learn to blow big and heavy soap bubblesIt is worth using a more complex recipe for preparing the mixture. You can take any shampoo as a basis for it, 100 ml of which 300 ml of water should be diluted, then add 1 tablespoon of glycerol and the same amount of sugar. The mixture must be mixed well and leave in a refrigerator for about 10-12 hours. From such a soap solution, excellent soap bubbles are obtained, large and non-burst for quite a long time.

Soap bubbles from the household soap

Those who love small and neat bubbles, but at the same time want them to do not burst immediately after blowing, you should take advantage of the recipe that is preparing on the basis of economic soap. It needs to be taken about 50 g and grate on the grater, pour 100 ml of water and lightly warm on the stove so that it turns out thick, viscous and homogeneous mixture. When it cools, you should pour another 200 ml of water, 100 ml of glycerin and 1 teaspo ammona alcoholThanks to which bubbles will be blocked by all the colors of the rainbow. The resulting composition should be perished in the refrigerator at least 2 days, after which it must be carefully moved, skip through several layers of gauze to remove the clots, and again send it to a cold place for 5-7 hours. After that, a solution for bubbles can be safely used without fear that they will burst too quickly.

Soap bubbles from children's shampoo

When it comes to young children, the adults often arises the question: how to secure them from trouble during the game? Even when ordinary soap bubbles are used, innocent entertainment can turn into children's tears if, for example, the composition will fall into the eyes. To reduce the risk of such trouble, at home can be prepared so-called soap bubbles without tears, the basis of which is a children's shampoo. It will take about 100 ml, which should be dissolved in 200 ml of cold water, after which it is for a day to put a mixture in the refrigerator. Before use, the resulting liquid must be mixed and pour into it 30 ml of glycerin.

Soap bubbles without glycerin

If we are talking about soap bubbles for one-time use, for example, during a home party, you can do without glycerin. In this case, its functions perfectly performs ordinary sugar. However, it should be borne in mind that such bubbles meaninglessly stored in the refrigerator, since when repeated use, they simply will not be blown out. As the basis for "sugar" bubbles, you can use absolutely any detergents. Experts claim that the most ideal is the combination of shampoo and dishwashing agents, which are taken at about equal proportions, after which they fill cold water. Then it is enough to add approximately 1 teaspoon of sugar to the mixture so that at least a few hours get quite large and long non-buzzing bubbles. In addition, a mixture of washing powder can be used to prepare a soap liquid, a dishwashing and shaving cream, which come about the same proportions and are bred by water, in which it is pre-adding some sugar. Well, the extremals have long been chosen for these purposes women's gels for intimate hygiene, which mixed with any shampoo water and sugar, due to which very large and beautiful soap bubbles are obtained.

Good day! I do not know who, like, but my childhood was bright. And such a love of parents, good friends, a sea of \u200b\u200bfunny games, fun holidays and balloons with soap bubbles. I remember well that one day my mother showed me how to do, and since then our yard has become like a drum washing machine, he literally drowned in bubbles and foam!

Since then, a lot of years has passed, but I know for sure that as soon as the son is growing, I will definitely tell him about this recipe. In the meantime, I will share it with you. And not only to them, I have appeared in arsenal and a new remedy, with glycerin . Probably from him will begin.

But! Formerly, I will tell you about the most important secret for any solution !!!

The cooked solution should "stand up! He needs from 2 to 24 hours to get the desired stunning effect!
Here is what we did:

The most durable bubbles in the world! Secret Ingredient

Intrigued? Believe me, it is worth it! And it is better not to believe, but check.

So that we need:

• Water - 300ml;
• Detergent (liquid) - 100ml;
• Glycerin - 50ml.

In order for us everything came out perfectly, we take into account one point. Water must be purified. If it is not possible to hardly profil it, then it will be enough to boil. But we need water room temperature, not hot.

Guess? The secret tool is glycerin. It we need so that soap balls will be particularly durable, hurrying . But also provides long storage of the means itself. It can be done in advance. It will not lose its properties and a few days later.

All ingredients are stirred, but not to the foam, just enough to connect them. Everything! You and your croches are ready to meet a warm day overflowing on the sun with balls!

Giant bubbles

For this recipe, gigantic bubbles are also obtained. Size You can choose yourself, mix the mixture immediately in a bucket or a basin, where your facility is placed for bubbles.

One condition - the weather should be calm, otherwise the wind will immediately burst all bubbles.

The rope that shorterately tie the ends to the ends of the sticks, with a long piece of rope make the same thing, pre-put the nut on it, like a bead. It turns out a triangle.

I lower the sticks with the rope in the bucket, gently slowly take out in the folded form, and slowly drag the sticks. More in the video, it is in English, but there everything is clear:

The easiest and affordable solution for bubbles

Now promised secret from childhood without glycerin . It is manufactured in a couple of minutes, and impressions gives for the whole day.

What is needed for him:

• Water - 150ml;
• Liquid detergent Wed - 2h.l.;
• Sugar - 1h.l ..

Prepare soap bubbles at home Recipe :

• Washing mixed with sugar.
• We add water and mix again to a homogeneous state.

The stronger that in the first case provided glycerin, now it helps to get sugar.

Innovative

And one more surprise for my friends! A new way to make a solution. In addition to water, sugar and detergent, it will be needed for him:

• Washing powder;
• Shaving foam.

Everything is taken in equal proportions.

But besides the solution itself, I will share some tricks that help do a lot with a balls, inflated large Bubbles or, how to do, if there was no special ring for inflation at hand.

Lyfhaki to launch soap bubbles

What to replace the ring. From the wire you can twist the loop of a suitable size. Or, disassemble the old handle and blow bubbles from a plastic rod.

Many at the same time. Tie a cocktail tube (with a cut corrugated part) with a rubber band. So that the design is durable, tie them on both sides.

Especially big. So that the balls do not burst ahead of time, and they could be inflated very large, you need double strength. To do this, add sugar, and glycerin into the solution. And now build a tool, with which we will get these bubbles.
We will need:

• 2 wooden spanks;
• 2 cocktail tubes;
• Meter yarn.

Step-by-step production:

• We skip the yarn through the tubes.
• Night ends tie. Cut the tips.
• Slide the tube so to get a rectangle.
• Inside each tube, we encourage the ships to strengthen the design. Before this, each spit is covered with glue.

Soap bubbles generator

And how do you like this idea? Why strain and inflate, you can arrange a complete party with soap bubbles, a good idea.

Here is a design with a motor:

That's it! The secret of my glorious childhood is revealed! I hope you will serve as a good service, and you will give you happiness with your children with it. If you know how else you can make a solution, write. And also, tell us about the results, if we used my advice. For some reason I thought now, that in this way your babies will arrange a real furyor in the yard. And their parents will ask what the secret of eternal bubbles. Tell them about the site, let them come and find out about everything in the world, which makes us better and happier! And do not forget to issue a subscription to not miss new articles.

That's all, to new meetings!

All children adore soap bubbles. Even the most capricious child begins to smile at the sight of the shredding of transparent balls. In addition, this fun also soul and adults. After all, the launching series of flying rainbow bubbles, we return to childhood. They are great for photo shoots, cheerful children's holidays and simply to decorate the usual gray weekdays.

The most pleasant thing is that this entertainment does not take you a lot of money. Because a small bubble with soap bubbles is fairly cheap. And for even more fun and endless happiness, it is enough to make a solution for bubbles yourself in any quantity. In addition, home bubbles are easy to prepare in advance and storing them later in the refrigerator for any convenient incident.

Secrets of cooking successful soap bubbles

Make soap bubbles at home quite simple. But in order not to spend a lot of time on samples and errors, it is worth learn all the secrets and subtleties in advance.

• For the manufacture of high-quality bubbles that do not burst on the first second and will have a good film, you only need to use distilled or boiled water. The fact is, the usual water from the crane contains a variety of salts and impurities, which significantly worsens the composition of the solution and the bubbles themselves.
• Increase the density and strength of soap bubbles allows the addition of glycerol into a solution previously dissolved in warm water.
• For the smallest "blowwalls" bubbles, it is better to prepare not very dense mortar, diluting it with plenty of water.
• Always check if you have a good solution. To do this, you need to inflate the bubble, and then touch it with your finger, wet in the foam. If it is bursting, then you should add soap or glycerin for density.
• Do not rush to use freshly prepared solution. His excerpt in the refrigerator during the day significantly improves soap bubbles. Because just during this time completely settles foam.

Recipes for home soap bubbles

Although they are called "soap", but in fact, bubbles are fairly easy to prepare and from such girlfriends as shampoo, glycerin and gels for washing dishes.

Below will consider the simplest and effective recipes For the preparation of large and small bubbles from various compositions.

With economic soap (for big bubbles)

You will need:

• 1 cup of grazed household soap,
• 5 glasses of water,
• 1 tablespoon of glycerol.

Economic soap is pre-grasped to grasp the crumb and mix with hot water. Then add glycerin to this solution. Then additionally dilute to the required density soap mixture with water. For small bubbles, it is enough to reduce the amount of ingredients in half.

With shampoo

You will need:

• 1 cup shampoo,
• 2 glasses of water,
• 3 tablespoons of glycerol.

Mix all the ingredients with each other. Water should be slightly warm for better dissolution of glycerol. Such a mixture must be insteaded about a day.

With bath foam

You will need:

• 0.5 glasses of water,
• 200 ml of bath foam.

Such fragrant bubbles from the foam for baths must draw after mixing the components. For a complete sediment of foam, the solution must be put in the refrigerator for 12-24 hours.

With detergent (for large bubbles)

You will need:

• 0.5 cup of detergent,
• 5 glasses of water,
• 1 tablespoon of glycerol.

Warm water is also used to prepare such a solution. First, dissolve glycerin in it, and then add detergent. Such bubbles are perfectly suitable for launching on the street.

With liquid soap

You will need:

• 0.5 glasses of liquid soap,
• 2 tablespoons of water,
• 1 teaspoon glycerol.

First you need to mix soap with warm distilled or boiled water. At the same time, a lot of foam will be formed, leave the solution in a cold place for 3 hours to asslave it. Then add glycerin, and insist the solution for another 10 hours in the refrigerator.

With sugar (for the biggest bubbles)

You will need:

• 5 tablespoons glycerol,
• 1 glassware for washing dishes,
• 3 tablespoons of sugar,
• 2.5 glasses of water.

Pre-dissolve sugar in a small amount of hot water boiled water. Then add and stir the glycerol in the same mixture. We dilute everything with water and pour the dishwashing fluid. Hold the solution at least 12 hours in the refrigerator. With the help of such bubbles, it will even be possible to build figures on any flat surface. It will also be great for large bubbles that are great for fun children's holidays. After all, they do not even have to blow out, but just enough to swing in the air figure wand.

What to inflate soap bubbles

In purchased versions of soap bubbles there are ready-made figured sticks for inflation. But when the preparation of the solution occurs at home, then a huge variety of devices for blowing bubbles appears. It all depends on your imagination and from the remedies that are in the house.

Plunction of bubbles, especially large is a breathtaking and magical spectacle. And with the addition of dyes or various effects, you are able to create your own fascinating show of soap bubbles.

You can spend a quiet evening of experiments, it is possible - a funny competition, and you can - a noisy pampering for the baby ... By the way, how many adults will be able to pass by children who let soap bubbles, and not show the "class"?

What is important to know in order to make soap bubbles at home oK?

Of course, the main thing is a solution and what sticks (tubes, frames) for soap bubbles you use. Below we give 7 recipes for soap bubbles. You can choose the one that suits you more, but do not be surprised: you may have to "fit" it under your conditions. Let some useful tips help you.

The main secret of success!

The basic condition for the preparation of a good solution - application high-quality water. If the water is too tough, the solution will be poorly: bubbles will fall small or they will not blow at all. We advise you to take drinking non-carbonated or filtered water. Not bad solutions are obtained on boiled or thawed water. Apply good waterYou have repeatedly raise the chances of success!

Useful tips for those who make soap bubbles at home:

• The smaller the impurities (perfume and other additives) will be in a soap or other washing tool used for the preparation of fluid, the more reliable the result.
• How to make a solution denser, and the quality of bubbles is better? To do this, use glycerin or sugar dissolved in warm water.
• The main thing is not to overdo it with glycerin and sugar, otherwise it will be difficult to blow bubbles.
• A less dense solution forms less stable bubbles, but they are easier to blow them (suitable for kids).
• Many fans of soap bubbles are advised to withstand a solution from 12 to 24 hours before use.
• At the start, before blowing the bubble, it is necessary to wait for a clean whole film (which you will blow), without additional small bubbles on the edges that sometimes arise. Bubbles need to carefully remove or wait when they disappear. And in general, the foam is desirable to avoid: insist, cool the liquid for soap bubbles - if only foam was less.
• Wind and dust in the air are not helpers for soap bubbles.
• High humidity Air - Assistant.

Solution for soap bubbles: recipes for all occasions

Classic solution of soap bubbles according to GOST

It is this recipe for soap bubbles that was used according to GOST for the preparation of a solution during the times of our childhood.

Ingredients:

• Purified water - 100 grams
• Economic soap or glycerin (non-soldered) - 10 grams
• Glycerin Clean - 20-30 grams

Cut or grasp soap. Soap must completely dissolve. It is impossible to use flavored varieties of soap, it is necessary that the economic or pure glycerin-free without additives. Strain the solution through the gauze.

Add to a mixture of glycerin. First you need to add 20 grams, and try bubbles to blow, and if they are not obtained, 20 more grams of glycerol are added to the mixture. Glycerin is needed in pure form - it is impossible to use the cream. Without glycerol, do it hard - bubbles will get "dry", from this they will bury faster.

Recipe 1, simple: soap bubbles from dishwashing liquid

You will need:

• 1/2 cup liquid for washing dishes
• 2 glasses of water
• 2 teaspoons of sugar

Mix all the ingredients thoroughly. Ready!

You can use a similar composition, where glycerin is used instead of sugar:

• 2/3 cup liquid for washing dishes,
• 4 glasses of water,
• 2-3 tablespoons of glycerin.

Mix all the ingredients thoroughly and remove the mixture into a cool place for 24 hours. Glycerin can be purchased in any pharmacy.

In order to make multicolored soap bubbles , Add a food dye to the mixture (2-3 teaspoons on the entire volume or divide into parts to get bubbles of different colors).

Recipe 2, for the smallest: How to make soap bubbles from a children's shampoo?

You will need:

• 200 ml of children's shampoo,
• 400 ml of distilled (boiled, thawed) water.

This liquid must be broken during the day, after which you should add:

• 3 tablespoons of glycerol or 6 teaspoons of sugar.

Recipe 3, fragrant: soap bubbles from bath foam

You will need:

• 3 pieces of foam for bath
• 1 part of water.

Recipe 4, original: soap bubbles with syrup

You will need:

• 2 glasses of dishwashing liquids
• 6 glasses of water
• 3/4 cup of corn syrup

Recipe 5, cheap and angry: a solution for soap bubbles from the household soap

You will need:

• 10 glasses of water
• 1 glass of sturdy soap
• 2 teaspoons of glycerol (or sugar solution in warm water can be with gelatin).

You can do the combination of water and soap without additional additives (for example, if glycerin is simply not). Curvated soap needed to fall asleep in boiled water, and hot, and stir until complete Dissolving soap. If the dissolution goes hard - you can slightly warm the mixture with continuous stirring. Do not bring to boil!

And if you do not want to rub a waste soap on the grater, then use such a composition:

• 100 ml of liquid soap,
• 20 ml of distilled water,
• 10 drops of glycerin (after the foam is falling, i.e. about 2 hours. It is better to insist fluid in a cold place).

Recipe 6: Especially durable soap bubbles for experimenters

You will need:

• 1 part of concentrated sugar syrup (proportion: on 1 part of water 5 parts sugar: for example, 50 g of sugar - 10 ml of water),
• 2 pieces of squeezed on the cooler of the soap,
• 4 parts of glycerin,
• 8 parts of distilled water.

With this solution, you can, for example, build a variety of shapes from soap bubbles, blowing them on the smooth surface of the table.

Recipe 7: Giant Soap Bubbles for Children's Holiday

You will need:

• 50 ml of glycerin,
• 100 ml means for washing dishes,
• 4 h. Sugar spoons,
• 300 ml of water.

A solution for giant soap bubbles can be prepared in a basin, and "blow out" them with a gymnastic hoop or specially twisted from flexible frame material. Honestly, it is not necessary to blow something - it's more likely to wave a frame or slowly pull out a large durable bubble from the basin.

What blowing? Tubes / frames / wands for soap bubbles

You can use tubules of different diameters, frames, cocktail sticks as sticks for soap bubbles (especially with cutting cruciform or in the form of a bugger and bent "petals"), hollow blasting or macariality, molds for cutting the dough, funnels, can be bought in the store Special pistols for soap bubbles or just blow them through your fingers!

And if you are invited to this hall of soap bubbles Or arrange such in itself, you can make original wands-frames with your own wires from wire and color beads, for example, such:

One more original idea - Use to blow up large soap bubbles ... plasticvery bottles !

If you have your ways to make soap bubbles at home or articles on the topic (especially with photos!) - Please share them in the comments!