Starting self-repair of housing, many owners of apartments, would like to know how to apply liquid wallpapers on the walls, video of this type of decoration can be quite often found on resources dedicated to construction and repair.

Studying video helps to master the technology of using such a creative finishing material. With this new material, you can create unique facial surfaces on the walls and the ceiling, without spending too much time to carry out preparatory plaster works.

Starting self repair of housing, many owners of apartments, would like to know how to apply liquid wallpaper on the walls

On a note! Before you know how to apply a liquid wallpaper on the walls, you need to understand that they represent, what properties do they have, in what places it is better to hold.

Due to its characteristic state, which is reflected in their name, can be used to finish hard-to-reach places that cannot be separated by rolled counterparts.

With this new material, you can create unique facial surfaces on the walls and the ceiling, without spending too much time to carry out preparatory plaster works.

Great suitable for:

• arches;
• erkers;

Arch decoration liquid wallpaper

• columns;

Before you know how to apply liquid wallpaper on the walls, you need to understand that they represent, what properties do they have, in what places it is better to hold

• air ducts.

In addition, this creative material allows:

• reduce work time due to the refusal of the plastering stage;

Color palette of liquid wallpaper

• conduct an exclusive ceiling overlap decoration, like a liquid wallpaper suitable for the texture and color;
• create a steady facial coating in rooms with temperature differences and high humidity.

Important! The use of this finishing material can significantly reduce the total cost of finishing work.

This finish is applied to the surface in liquid form, which allows it to be used in hard to reach places. How to glue the liquid wallpaper on the wall, you can look at the video, which is presented in the article.

If glue should be applied to roll materials, then the liquid wallpaper is simply applied to the surface of the walls or the ceiling, since glue already enters such a working solution

If glue should be applied to roll materials, then the liquid wallpaper is simply applied to the surface of the wall or ceiling, since glue is already included in such a working solution. The resulting decorative surface does not need to be smoothed as it happens when placing ordinary wallpaper. Such material is suitable for places with increased level Humidity, where it is impossible to use traditional rolled wallpaper to finish the walls and ceiling, even if they are made of synthetic materials.

In this case, such a finishing surface is distinguished by a variety of texture and colors.

From liquid wallpapers can be created unique interiorswithout spending a lot of time and money for it. Their composition may include fibers of natural materials, such as:

• silk,
• cellulose,

From liquid wallpapers, you can create unique interiors without spending a lot of time and money.

• cotton;
• sand;

Brightly pronounced fibers silk

• quartz;
• mica,

Liquid wallpaper - more resistant than normal wallpapers, finishing material that is not afraid of moisture and temperature differences

• flock.

They allow you to create decorative surfaces on the walls and a ceiling of different colors. To do this, add a suitable pigment to the working mixture. Liquid wallpaper is more resistant than conventional wallpapers, finishing material, which is not afraid of moisture and temperature differences.

It is applied with a spatula on the surface of the wall or ceiling and aligned with the help of special tools. This allows you to eliminate irregularities and cracks simultaneously with the application of the facial coating.

Wide decorative and functionality

Masters using drawings with liquid wallpaper on the wall, can not only create exclusive decorative surfaces.

The wizard can create any drawings from liquid wallpapers on the walls.

Such material has:

• soundproofing;
• thermal insulation;

Masters using drawings with liquid wallpaper on the wall, can not only create exclusive decorative surfaces

• wear resistance;
• moisture resistance.

The master can create any drawings of liquid wallpaper on the walls, the photos presented below will allow the decorative possibilities of this finishing material to fully.

Liquid wallpaper in the kitchen

Technological and decorative characteristics of liquid wallpaper allow them to use them for finishing various rooms:

• living room in which you can create a home cinema with good acoustics;
• children's or bedroom, where protection from external sounds is required to create comfortable conditions for sleep;

With their help, you can create unusual color and textural combinations on the walls and the ceiling without unnecessary material and time costs.

• bathroom or in the kitchen;
• hallway, in which you need to use a finish with high wear resistance.

Such materials are made from secure components that will not cause allergies and delay the natural flow of air. Liquid wallpaper is environmentally friendly and safe for human health. With their help, you can create unusual color and textural combinations on the walls and the ceiling without unnecessary material and time costs. For places with elevated levels of humidity and premises, in which the surfaces of the walls and the ceiling are quickly contaminated, it will be necessary to cover the liquid wallpaper after drying with varnish. This will protect them from water and will give an opportunity to carry out wet cleaning.

Eco-friendly liquid wallpapers and safe for human health

On a note! Manufacturers offer a large selection of such a finishing material, which includes various elements in the thickness and structure.

As a result, you can create the desired thickness of the decorative layer, starting with very thin in 2-3 mm, ending with thicker.

Due to its special structure, liquid wallpapers in the frozen state are similar to foam:

• paste air;

Due to its special structure, liquid wallpapers in the frozen state are similar to foam

• do not absorb moisture and contamination with additional processing with special varnish;
• suitable for staining.

Such finishing material will save on cosmetic repair And will give the opportunity to update the interiors without excess costs. It is enough just to paint the surface of the walls and the ceiling, trimmed with liquid wallpaper, in the desired color water-emulsion paintTo change the situation in the house.

The material has excellent agidezide properties and firmly falls on any surface. With it, you can create smooth surfaces without seams, which will visually expand the space indoors.

Wallpaper Coating Technology

Many apartment owners would like to find out how to cover liquid wallpaper when using them for finishing different rooms in the House. But before you need to know how to properly apply onto the walls and the ceiling.

Preparation of working solution

The process of cladding itself includes:

• preparatory work related to cleaning surfaces;
• preparation of the working solution;
• applying liquid wallpapers on wall or ceiling;
• staining the hardened surface with varnishes or paints.

The surface of the walls and the ceiling before finishing should be carefully cleansed from pollution and falling pieces of plaster. You can apply liquid wallpaper only on a solid base that will not absorb moisture and change the color of the facial coating.

You can apply liquid wallpaper only on a solid base that will not absorb moisture and change the color of the facial cover

Before applying liquid wallpaper, surfaces need:

• clear from the old facing layer;
• launch large cracks;
• protect;
• create a rough texture on the surface so that the liquid wallpaper is better to keep and crawled.

After that, you can proceed to the preparation of the work makeup. The dry mixture is diluted with conventional water to the consistency of oily cream or sour cream. Before that, you need to threaten the package with a dry mixture to get rid of lumps. The working mixture is prepared in deep containers so that it can be well stirred to a homogeneous state. Proper holding preparatory work It will make it possible to achieve a qualitative application of liquid wallpaper themselves.

Apply the working mixture is needed by a simple smooth spatula without much effort.

The finished mixture must then be applied to the prepared surfaces by conventional plastering tools. People who have no experience with this material can watch the video on the question of how liquid wallpapers are applied on the walls and the ceiling. It is very simple, even a newcomer will be able to master this technology.

You need to apply the working mixture with a simple smooth spatula without much effort. And you need to try to press the resulting finishing layer. It should be loose and relief. If the walls or ceiling have a large number of irregularities, then you need to be prepared for the fact that you will have to spend more consumables for their finishing, creating certain drawings from liquid wallpapers on the walls and the ceiling.

Modern wall decoration with liquid wallpaper

In order to obtain a smooth and uniform surface, it is necessary to apply the material from one angle to another one. This will avoid irregularities and joints.

Operation and coating care

Such finishing material is universal and suitable for use on:

• walls;
• ceiling;
• complex elements of architectural layout.

On a dried surface, you can create any color combinationsSelecting suitable coloring materials.

In order for such a finish to keep long and looked beautifully, it is necessary to care for her

In order for such a finish to keep long and looked beautifully, it is necessary to care for it. This follows:

1. Cover the dried liquid wallpaper with a special varnish if they are used to create an interior entrance hall, kitchen or bathroom. In these places, the walls and the ceiling should often be covered with a wet cleaning to save their attractive external view. Varnish will protect the liquid wallpaper from the destructive impact of moisture.
2. Regularly update the paint on the walls and the ceiling to maintain the aesthetic type of cladding.
3. Proper to carry out repair work in places of electrical wiring.

Unlike all others facing materials Liquid wallpapers on the ceiling and walls can be restored after repair without resorting to additional costs. To do this, only the right repair itself is necessary: \u200b\u200bduring the repair process:

• with the help of the spray, moisten the wall area where wiring should be conducted;
• remove the softened wallpaper into a special clean capacity;

• replace the wiring;
• protect a renovated area;

Spatula for applying liquid wallpaper

• mix the surface of the pulverizer;
• dilm wallpaper with water tanks to liquid state.

The last operation is to apply wallpaper in place with a spatula.

In this way, you can save the finish from liquid wallpaper not only on the walls, but also on the ceiling, it is enough to see the photo of all stages of work. No other finishing material has such characteristics that allow rationally to spend the budget during cosmetic repair.

No other finishing material has such characteristics that allow rational to spend the budget during cosmetic repair.

In order for liquid wallpapers as long as possible, they retain their original appearance, you must correctly check them. For this, a special moisture-resistant acrylic varnish can be added to the working solution, which will make it possible to achieve the creation:

• moisture resistance;
• vapor permeability;
• hardness.

You can also apply acrylic varnish on the already dried surface, which will improve its wear resistance and resistance to moisture. Compliance with the recommendations of the manufacturer of such a finishing material for applying and subsequent care will preserve cladding from liquid wallpapers over a long period of time and will allow you to significantly save on cosmetic repairs.

Having mastered the simple technology of applying liquid wallpaper, each owner of the housing will be able to implement all his ideas about creating exclusive interiors of residential spaces

Having mastered the simple technology of applying liquid wallpaper, each owner of the housing will be able to implement all his ideas about the creation of exclusive interiors of residential space without spending large material means.

I like

Thanks to diversity color solutions and a special structure, liquid wallpapers are now used everywhere. They can be seen on the walls of offices, residential premises, beauty salons. Such wallpapers are easy to purchase in a construction store. But much more interesting to make them with your own hands.

The advantages of this finishing material can be listed for a long time. Therefore, we allocate only their main advantages:

• the ability to separate complex surfaces, for example, curvilinear;
• the absence of seams when applied to the ceiling and walls (processing is performed by a solid layer);
• an increase in the sound and thermal insulation parameters of the premises (as part of the wallpaper there are fibrous additives);
• alignment of ceiling and wall surfaces on which there are small cracks and other defects;
• dust does not stick to the wallpaper, as they are not able to accumulate static electricity;
• simple repair of individual surface sections if necessary (just apply a new layer of material).

Finishing material for walls

Also, liquid wallpapers are not peeled (if they get married when the neighbors flooded you from above, you just need to dry them), do not fade under the sun (and after 10 years they will look like new), are an environmentally friendly material.

In addition, they are elementary to care for them. Wallpaper can be cleaned with the help of a vacuum cleaner or wipe with a rag moistened in water, if the material is applied on top to the material.

If you have conceived to make this finishing material with your own hands, you need to deal with its composition. All manufacturers of liquid wallpapers are very zealously stored the accurate recipe for their production, the full list and proportions of the components that are used. At the same time, everyone knows that the following elements include the composition of such coatings:

• silk and woolen threads;
• cellulose fibers;
• acrylic;
• dyes;
• natural cotton;
• textile;
• mineral crumb, mica, pearl of different shades;
• polyester, lavsan and other artificial fibers;
• antifungal supplements;
• cellulose glue.

For the manufacture of a liquid coating with your own hands, we will need these materials. Purchase them is easy. Under cellulose fibers understand the usual wool. You will sufficiently cut it on the required pieces, and then paint in different colors using fabric dyes.

Making a liquid coating with your own hands

Textile, polyester, polyester fibers, wool easy to buy. You will only need to prepare them for use, cutting on the thread of the required length. Operation time-consuming and long-term, but otherwise in no way.

Acrylic, which is part of the material, is sold in stores, but not in all. Therefore, it's easier to order it via the Internet. The network you can also purchase a mother of pearl, and quartz or marble dust, and other multi-colored sequins. But the cellulose glue is the usual bustic, made on the carboxymethyl cellulose base. It is sold in any construction store.

As an antifungal component, liquid glass can be used (sodium silicate) or another fungicide, which will fall. It will be necessary to buy different dyes, mix them in your liking, and then start creating wallpapers with your own hands. How to make it describing next.

If you want to make not a full-fledged liquid coating, but only its imitation is colorful and bright, we advise you to draw attention to the next recipe. Take a bag of building putty for walls, stir the dry composition with water according to the manufacturer's instructions, and then add a little dye to the resulting solution. Now it is necessary to stir the mixture, see what happened, if necessary, add a little more thanks (better than another shade to get the original color).

The made solution can be immediately applied to the surface being processed (on the ceiling, wall). To do this, use a 40-centimeter spatula. After drying, the solution is desirable to apply a varnish (colorless). After a couple of hours you can enjoy not quite real, but it is very cheap liquid wallpaper.

Drawing a finishing solution on the wall

The second simple recipe makes it possible to make the coverage of us with your own hands from the old paper (any scraps of magazines, packaging wrappers, newspapers, and so on). Here everything is simple, let the master class:

1. Rewail scraps of paper into small pieces (the smaller, the better).
2. Place these pieces in a bucket, pour water from under the tap, leave a mixture of an hour at 4. The volume of fluid is taken at the rate of 5 liters per 1 kg of paper.
3. We take an electric drill, screw the mixing nozzle on it, thoroughly mix the contents of the bucket until you get a homogeneous mass.
4. Add to bucket and selected dyes, mix the drill again.
5. Take out the mixture, wrap it in polyethylene film Either put in the package, leave for 13-14 hours.

After that, get the composition, which turned out from water, paper and other additives, and again smear it. But now this procedure is done with your own hands without applying an electric train. If you want to get wallpapers with sequins, you need to add decorating components to the mixture.

On this master class is over. You will remain add to the homemade wallpaper Gypsum and apply the composition on the wall or the ceiling. Important! Do not add plaster at once in the mixture. She quickly grabs. You may not have time to handle the surface. We knead small portions and quietly distribute homemade material.

The manufacture of the coating that will be as close as possible to the original compositions, implies the use of different materials. As adhesive Basics You can apply:

• Bustylate;
• acrylic putty;
• PVA or casein glue, which is often attached by the usual wallpaper.

Bustylate for the manufacture of liquid wallpapers

Experts argue that the most durable connection provides putty on the basis of acrylic. Liquid wallpapers based on it takes high resistance to deformations and mechanical abrasion during operation.

The main material for wallpaper can be any fibers that we have already spoke at the beginning of the article. Bretfully decay the old sweaters and sweaters, T-shirts, cut them into small pieces. Dye buy in the store. It is important to acquire such a composition recommended for water colors. Other dyes can not be applied.

After preparing the required components, we proceed to the manufacture of wallpaper. Everything needs to be done according to such a scheme:

1. In the bucket place the threads cut into small fiber particles or other materials that you use as the main one.
2. Add to the fibers the selected adhesive composition (proportions - 1 to 1), mix the resulting composition.
3. Add to bucket decorative elements (mineral mica, crumb, sparkles, and so on) and again mix all the mass.
4. You can add some water if your mixture turned out too thick.

The resulting mass leave for 7-8 hours, so that the threads and fibers are completely impregnated with adhesive composition. After that, you can start on the wall or ceiling surface. Recommended coating thickness - no more than 3 mm.

In the market set different materials For wall decoration. Liquid wallpapers are gaining their popularity and increasingly we can meet this material.

And so what is liquid wallpaper? This is a subspecies of plaster in which silk and cellulose fibers are contained. Also there are mixtures with granules and sparkles, they give the material aesthetic appearance. Fix the material with simple glue CMC, we glue simple roll wallpaper. But the application technology is very similar to how we apply putty or plaster.

Liquid wallpaper put on the wall

Pluses of liquid wallpaper:

• Harmless to health;
• Sound and thermal insulation;
• Can be applied to columns, arches, etc.;
• Pleasant surface (silky);
• Do not burn from light and no seams.

If liquid wallpaper is stained, you can just wipe with a wet sponge, and if it does not help or damage more serious, clean this section of the wall to sweat and impose a new layer of solution.

On the market you can find a huge variety of materials for interior stand decoration. Liquid wallpaper are becoming increasingly popular among consumers. For this reason, there are increasingly issues related to the choice and rules of application. Consumers choose, and we constantly meet this material in different residential and public premises.

Liquid wallpapers: from which consist, and what kind of varieties are

So, will you figure it out, what are liquid wallpapers? We are talking about one of the types of plaster with textile and decorative fillers, silk, flax, cotton or cellulose. More expensive types of liquid wallpapers include various granules and sparkles. They are responsible for an exclusive appearance. You can buy liquid wallpaper with decorative inclusions from the same suppliers.

The finish is a textile mixture that is attached by the usual CMC glue, the roll wallpaper is glued. It is he who acts as a strong binder. In essence, liquid wallpapers combine the features of two coatings: plasters and wallpaper. On the one hand, they form a tissue basis, on the other, are applied as plaster.

At the same time, liquid wallpaper differ from these coating methods and differ in the better, borrowing the best qualities.

It is worth highlight the advantages of liquid wallpaper:

• consist of environmentally friendly materials;
• quite easily applied on the wall even by people without experience;
• the mixture can be applied to any complex textures and forms;
• can be repaired;
• provide sound insulation;
• are additional thermal insulation;
• have a pleasant fabric texture, always warm to the touch;
• when applying does not have seams;
• do not burn out;
• long stored.

The ability to repair and washing damaged sites is an important component of the choice. This quality is not inherent in the plaster or roll wallpaper, but it is advantageous with liquid wallpaper. If the repair is needed, the area is scraped, cleared or replaced by a new composition. As a result, no trace remains from damage. And so you can correct the parts of the wallpaper infinitely, which is especially valuable when there is a small child in the house.

How to apply liquid wallpaper?

How can I apply liquid wallpaper on the walls? This is done by a regular spatula. You can use a special tool for liquid wallpaper, it can be cheap to buy in stores. This is a plastic spatula with a thin working surface. It is important to purchase precisely a transparent option, since it allows you to monitor the application of the fibers and to remove ugly clusters in a timely manner. From the owner of the apartment requires a little effort and fantasy to get a truly rich texture.

Liquid wallpaper can be applied by a simple spatula. But also, for applying such a material there is a special tool from transparent plastic and with a narrow web. It is convenient for them to ensure how to apply material with fibers. Showing a little fantasy, you have a beautiful texture.

We mix the liquid wallpaper

To prepare liquid wallpapers before applying, large knowledge is not required in this area. We write all step by step:

• Poker contents put in the container where it will mix dry composition with water
• For a standard bag, liquid wallpapers are enough 5 liters of water, but remember, always on bags there are instructions in which proportions interfere with the mixture with water
• Dry makeup mixed with water with hands, use mechanical items most often prohibited
• Mixing the composition gradually topping the water so the composition of the desired consistency is achieved.
• As a result, the mixture must be left for several hours, perhaps at night

It is impossible to knead the whole package, not to make it into two parts, since in the whole bag contains the desired number of different additives. Most often one packaging in 1 kg is enough for 5 2 meters.

First stage - Preparation of the wall to apply finishing material

Of particular importance is attached to the preparation of the surface on which the finishing material will be applied. It is purified from wallpaper, fragile sections of plaster, if necessary, plastering cement-limestone. Then, after drying, covered with quartz soil. After that, the surface is ready to apply textile composition.

Selection of colors

You can buy liquid wallpaper of any color. All shades with various decorative inclusions are available on sale. It is the finish that will affect the final price. In this case, the result will exceed all expectations. A tissue base will be applied on the walls that creates the atmosphere of comfort and comfort.

Pay special attention to the selection of color. The assortment presents saturated shades: burgundy, turquoise, blue, black. They usually have metallized inclusions that create noble texture. Such wallpapers are complemented by complex light design. note that dark Rooms Always look more comfortable, it is especially characteristic of night time when an intimate atmosphere is installed in such premises.

Light shades are suitable for kitchen and hallway. On the walls using liquid wallpapers, a graphic pattern can be performed, which is especially suitable for children's and living rooms.

Preparation for application - we knead the photo wallpaper

To get a beautiful homogeneous surface, which will be firmly glued to the base, you need to accurately comply with the application technology.

It is better to follow step by step instructions:

1. Place the contents of the package in the container.
2. You will need 5 liters of water to 1 standard bag, 1 kg is designed for 52 square meters. m Square.
3. Mix the makeup with hands without using metal objects.
4. Water fills gradually to achieve uniform wetting.
5. The mixture should be soaked with water, for this it is left for 7-8 hours (better at night).

If you need a smaller amount, it is still recommended to use all packaging. Its subsequently can be dried and put on storage. This is due to the amount of adhesive components that are part.

The technique of applying liquid wallpaper or how to glue liquid wallpaper with their own hands

If you at least once applied plaster or putting on the wall, then you will not have problems with this material. Something to spoil is very difficult, since the material can be removed and re-apply.

Liquid wallpaper how to apply them on the wall? We apply on a well-prepared surface. The type of surface can be any: brick, plasterboard, metal and wood. When applying the composition, we pressed on the material that it would not lose the shape and the layer was not thick (thickness up to 3 mm.) The spatula must be kept at an angle of 20 0 in terms of the wall. The composition dries over two days and requires that the room would be periodically ventilated.

If there is an experience of applying plasters, then you will not have any problems with this coverage. Spoil or incorrectly done very difficult, except, you can always fix not very good result. The mixture is simply removed and applied again.

Application of liquid wallpaper step by step:

• after surface preparation, we apply the material in small portions;
• after applying each portion, it is carefully smoothed, gradually achieving a homogeneous surface with perfectly smooth texture;
• the thickness of the wallpaper layers should be approximately 3 mm;
• when smoothing, you need to hold the spatula at approximately an angle of 200 degrees;
• the applied coating dries two days;
• at this time, careful periodic air ventilation is required.

Important! When applying liquid wallpapers on need to be pressed as plaster, in such cases they will lose their volume and texture, leave the composition a bit loose.

For a visual example, you should watch the video as liquid wallpaper are applied to the wall.

Liquid Wall Care

Such material can be protected and the service life is greatly tightened. Suppose in the kitchen, cover the liquid wallpaper varnish and the question of how to wash the stain from the wall disappears, you can use cleaning agents.

If in some place you need to repair and the question appeared how to remove the liquid wallpaper. We put water with a sponge or sprayer to this part of the wall and remove the part of the wallpaper, after the repair is completed, a piece of liquid wallpapers are stirred in water and again we apply to the right place.

Conclusion

The use of liquid wallpapers indoors usually does not require additions. However, these textures are well combined with wooden panels, photographic windows, ornamental plaster. To make the decision to have a win-win, we recommend using the color palette.

Individual elements of the room will be performed in the selected shades, it is possible to combine the sections of finishing from liquid wallpaper or decorative plaster. It is advantageous to decorate the room widescreen photostruites that are withstanding the tone of the product.

The apartments offered in stores can be applied as independent decision Or with other species. At the same time, among all interior materials, it is liquid wallpaper to provide you a velvety, pleasant to the touch warm wall covering, which can be repaired and practically does not change its appearance over time. We offer you to order a liquid wallpaper if you want to create a special space in the interior.

How to apply liquid wallpaper on the wall or on the ceiling? What is this material, what is it from? Do I need to prepare the surface to apply wallpaper? Let's deal with.

Acquaintance with Material

Let's start with general information.

Structure

The idea of \u200b\u200bwallpaper was originally cooled to the walls of the walls with paper to align the surface and decorations printed on it patterns. Much later, with the advent polymeric materials At affordable prices, manufacturers have been released to the market vinyl, fiberglass, fliesline and some other types of coating.

Liquid wallpapers have undergone similar evolution. Initially, they included only cellulose. With moisturizing, the recycled wood is distinguished by lignin - a fairly effective adhesive agent that allows you to form a dense coating on the wall surface.

Curious: In fact, after drying a layer of moistened cellulose on the wall surface, a layer is formed ... ordinary paper.

At the initial composition of liquid wallpaper, alas, there were several drawbacks:

1. Adhesive properties of lignin is not enough to form a solid and wear-resistant coating.
2. Cellulose overwhelbs in the sun and loses its original color.
3. In addition, it is an ideal nutrient medium for reproduction of mold.

Later, the composition was adjusted by manufacturers, taking into account the wishes of consumers.

The composition of modern solutions usually include:

• Cellulose and / or fibers of natural silk. They perform filler and reinforcement functions. The more silk is part of liquid wallpapers - the more resistant to ultraviolet the resulting coating.

• Binder - organic or polymer glue.
• Fungicides (antiseptics). They prevent the appearance of fungus on the trimmed surface. (See also Article.)
• Plasticizers simplifying the finished mixture.
• Dyes and decorative components (marble crumb, scales mica, sequins, etc.).

Along with ready-made liquid wallpaper, you can find the compositions under the tinting. The desired color is obtained by adding water-soluble pigments.

Advantages of solutions

What properties of liquid wallpaper deserve their current popularity?

• Lack of visible seams.
• The possibility of fast partial repair with inevitable damage.

In the photo - repair of a damaged area.

• The ability to align small wall defects without prior shtkock. In fact, liquid wallpaper themselves are decorative plaster, differing from traditional plaster solutions only in the absence of sand.
• Beautiful acoustic properties. Due to the considerable thickness (1-3 mm) and the porous structure, the coating perfectly absorbs the sound.
• The possibility of applying at arbitrarily complex surfaces of arbitrary shape.
• Paro- and breathability. The notorious porous structure does not create barriers for natural ventilation of the room through the material of the walls.

Help: up to 30 percent of the vapor and air exchange between the street and the residential premises occurs right through the enclosing structures.
The greater the vapor permeability of the walls and decorative coatingsThe easier it breathes in the house.

Getting to work

So, the choice is made. How to apply liquid wallpaper yourself? Let's start with the preparation of the base - wall or ceiling.

Surface preparation

Our goal is to get a base with the size of irregularities no more than 3 millimeters, strong enough and having good adhesive properties.

1. We delete peeling sections of plaster and putty. Tools - small korcha and hard. To remove whitewash it is necessary to pre-moisten it with water with a brush or sprayer: wet lime easily and without extra dust is removed with a spatula.
2. Remove all robbed and twisted nails, screws and dowels. Any item from corrosionless steel will quickly become the center of the rusty stain.
3. Plastelling or Splice Defects. Thighters in the plaster can be sealed both plaster or cement plaster mixtures and cement tiled adhesive or self-prepared solution of 1 part of the cement of the M400 brand and sifted through a sieve with a 3-millimeter sand cells.

1. Dust the surface with a vacuum cleaner or belt.
2. Rejected base penetrating soil on acrylic basis . Prime will connect the remaining dust, strengthens the surface and improve the coating adhesion.

Is it possible to apply liquid wallpapers on wallpapers pasted during previous repairs?

In principle, this is possible, but with several reservations.

• Old wallpaper should be paper. Vinyl, fiberglass and painted phlizelin will not provide the desired clutch with a coated.
• Pre-primer penetrating grant is required.
• The glue on which the wallpaper was glued should not be soaked with moisture. Otherwise, during the primer, we will get bubbles and wrinkles over the entire surface.

Check whether it will be possible to apply liquid wallpaper on top of paper, it will help an easy instruction: or the ceiling. If after drying the primer, the surface will remain smooth, and it will not flashate - everything is in order; If the wallpaper went bubbles - they will have to be removed.

Tip: In the latter case, it is worth it again to wet the wallpaper with a brush or sprayer.
Part of the bands after glue glue, it will be pulled off entirely; The remains will be easy to clean the steel spatula.

Preparation of liquid wallpaper

It boils down to the pre-soaking of the dry mixture in the amount of water indicated by the manufacturer. For several hours, the composition is thoroughly mixed with their own hands or using a mixer on minimal revs. Fast mixing mixer will crush reinforcing fibers; As a result, the surface will lose its texture and strength.

If the wallpaper is planned to be poured, the pigment is added to the water and is thoroughly mixed; The mixture is falling asleep after that. Thus, we will achieve the most uniform painting.

The amount of cooked mixture is calculated under the entire area of \u200b\u200bone wall or ceiling. If you apply it with pre-drying sites, the transitions will be visible. With a tinting, the entire volume of the mixture is prepared at once: re-obtain the same shade is simply unreal.

Application

Wallpapers are applied to the base with a layer of 2-3 millimeters with a wide spatula or stainless steel grater. The mixture is flashed on the surface area and smooth with smooth sliding movements.

The main problem is to obtain a uniform distribution of diets of cellulose fibers and / or silk. This can be achieved by smoothing every section with light multidirectional movements. In the corners of the room, wallpapers are located in the direction of the corner; Then several transverse movements are placed part of the fibers in arbitrary directions.

Several subtleties:

• Variating the direction of movements of a spatula or grater, you can get sections with different textures.
• To obtain a complex surface structure, you can use a factory roller. The surface is rolled to them after the liquid wallpaper is distributed by a uniform layer.
• By filling out the different areas of the contour pre-applied on the wall with liquid wallpaper, mounted in different colors, you can get a complex image or pattern.

• In wet rooms after drying, the wallpaper is covered with a water-based acrylic varnish.

Conclusion

Of course, when planning the repair faces the issue of expenses. How much does it cost to apply liquid wallpaper?

If you do repairs yourself, price square meter The surface will be 50-150 rubles depending on the material selected. The corresponding service of professional builders costs 250-600 rubles per square.

As usual, in the video in this article, the reader will be able to find additional thematic materials. Successes!