Estimated - regulatory framework

"State Stallon"

Ter-2001 St. Petersburg

Collection number 20.

Official edition

Government of St. Petersburg Committee of Economic Development, Industrial Policy and Trade St. Petersburg State Institution "Center for Monitoring and Examination of Prices"

st. Petersburg 2008

System of regulatory documents in construction

saint Petersburg

Territorial unit rates for construction work

Ter-2001 St. Petersburg

Collection number 20.

Ventilation and air conditioning

Government of St. Petersburg Committee of Economic Development, Industrial Policy and Trade, St. Petersburg State Studies "Center for Monitoring and Examination of Prices"

st. Petersburg 2008

rates			Including rubles
				masher operation)		materials
unaccounted materials					machineist	materials

	Laying air ducts
	Thick: 0.7 mm, perimeter 900
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, perimeter from
	1100 to 1600 mm
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristic construction work and structures		Including rubles
				masher Operation *		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinist	materials

	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, perimeter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, perimeter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal)
	thick: 0.7 mm, perimeter 4000 mm
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Masht.		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal)
	thick: 0.9 mm, perimeter 3700 mm; from 4100 to 4500 mm
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.9 mm, perimeter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				masher operation)		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinist	materials

	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 1.0 mm, diameter from
	900 to 1000 mm
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 1.0 mm, diameter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 1.2 mm, diameter 1400
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machine!	materials

Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.5 mm, diameter to Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.5 mm, perimeter to Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.6 mm, diameter to Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.6 mm, diameter to Metal air ducts Turnsel valves in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) thickness: 0.7 mm, diameter from 500 to 560 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.7 mm, diameter to Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter 900 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter from 1100 to 1600 mm Metal ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter up to 2400 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts from sheet galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter up to 3200 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter up to 3600 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter 4000 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Masht.		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.9 mm, perimeter 3700,4100-4500 mm Metal ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.9 mm, perimeter up to 5200 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.9 mm, perimeter up to 7200 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

Laying air ducts sheet, galvanized steel and aluminum class H (normal) thickness: 1.2 mm, diameter 1600 Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

Table 20-01-002. Laying air ducts from sheet, galvanized steel and aluminum class P (dense) Meter: 100 m2 Duct surfaces

Territorial unit rates for construction work Ter-2001-20 SPB Ventilation and air conditioning.

/ SPB GU "Center for Monitoring and Examination of Prices" / St. Petersburg, 2008.

These territorial unit rates (SPB Ter-2001) are intended to determine direct costs in the estimated cost of construction work when performing work on the device for ventilation systems, air conditioning and air heating.

Developed by the St. Petersburg State Institution "Center for Monitoring and Examination of Prices"

Approved and implemented by the Committee of Economic Development, Industrial Policy and Trade Order No. 233 of September 7, 2001.

Registered: in the Federal Agency for Construction and Communal Economy (Rosstroy) in the prescribed manner.

In exchange: territorial single rates for construction work Ter-2001 / Administration of St. Petersburg / St. Petersburg, 2001.

Present territorial unit rates for construction work Ter-2001 SPB cannot be partially reproduced, replicated and distributed as an official publication without permission of the Committee for Economic Development, Industrial Policy and Trade

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 1.0 mm, diameter from 900 to 1000 mm Metal ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 1.0 mm, diameter up to 1250 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 1.2 mm, diameter 1400 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

Estimated regulatory framework

_ "State Stallon" _

Territorial unit rates for construction work

Collection MS 20 Ventilation and Air Conditioning Ter-2001-20 SPb

TECHNICAL PART

General provisions

1. Real territorial unit rates for construction work for use in St. Petersburg in basic prices for January 1, 2000 are intended to determine direct costs in the estimated cost of performing work on the device for ventilation systems, air conditioning and air heating and composing estimated calculations (estimet) , as well as for calculations for completed construction work.

1.2. Ther reflect the average industry level of costs for adopted equipment, technology and organization of work on each type of construction work and, in this regard, can be used to determine the estimated cost of construction by all customers and contractors regardless of their departmental subordination and organizational and legal form.

1.3. Rates for this collection are applied to work on the device for ventilation systems (general and local), air conditioning and air heating in residential, public, production and auxiliary buildings of industrial enterprises, regardless of the material of walls, overlaps and partitions.

1.4. Installation of equipment for technological purposes (fans, cyclones, scrubbers, etc.) is determined by the collections of therm2001 SPb on the installation of equipment.

1.5. The rates provide a full range of basic and auxiliary work on the laying, installation and attachment of the corresponding elements of systems, including the acquisition, installation and removal of rigging devices, drilling holes for fasteners, manufacture of rubber gaskets, and the like.

The gasket of air ducts is provided in the presence of ready-made through holes in walls, partitions and overlaps. Inserting holes after the passage of the air ducts by rates of the collection is not taken into account.

1.6. The rates of tables 01-001 and 01-002 are provided for a gasket of class H air ducts (normal) and class P (dense) from sheet, galvanized steel and aluminum. For air ducts from corrosion-resistant steel, appropriate rates of tables 01-001 and 01-002 are used, taking into account the coefficients shown in section 3 of the technical part.

1.7. Primary coloring or primer of air ducts and ventilation products provided for by the technical conditions is performed by manufacturers.

1.8. Installation of throttle valves in nozzles, seams, grids in the framework of pitchers and brackets and fasteners are taken into account in the rates for gasket of air ducts; Their number, types and sizes of the specified products take according to project data.

1.9. When connecting the air ducts of a rectangular cross section (on tires) with brackets at the rates of tables 01-001, 01-002, the bolts should be deleted with the addition of a project bracket.

1.10. In the rates of Tables 02-005 and 02-006, an installation of air deficient valves, valves of type of KVV and similar structures is provided.

1.11. In the rates of Table 02-007, the installation of valves of the KVU type and similar structures is provided.

1.12. In the rates of tab. 02-012 At the installation of deflectors, the installation of stretch marks with tallrepa, the number of stretch marks and tallons to receive by project data is taken into account.

1.13. Table rates 03-001 - 03-003 are applied to radial fans, axis and roofs regardless of the material from which they are made (carbon steel, corrosion-resistant or aluminum).

1.14. In the rates of Table 03-001 - 03-003 and 06-015, the costs of revision, drying and the attachment of the electric motors to the network are not taken into account on the installation of fan, axial, roof and fan aggregates. These costs should be determined by the Column of Term2001-08 SPB "Electrical Installations".

1.15. Installation and consumption of vibration insulators Rates of Tables 03001 Chosozosis are not taken into account. The cost of installing vibration insulators should be determined at the rates of Table 02-020.

1.16. In the rates of tables 03-001 and 06-015, the costs of installing flexible inserts are not taken into account. Installation of flexible inserts should be determined by the rates of Table 02-018.

1.17. The rates of Table 05-001 take into account the costs of installing cell filters (metal and paper) and aerosol (with FP filtering material) installed on the supply and exhaust ventilation systems.

1.18. Ralance 1 Table 05-001 on the installation of filters of cellular installation of the frame

1.19. The rates of the collection are not taken into account the costs of installing fans, filters of suction, cyclones of batteries, shutters of sluice, unloaders, etc. devices installed in aspiration systems and pneumatic transport in granaries, grain processing enterprises and other industries and are determined by the collections of the term-2001 SPB for installation equipment.

1.20. In the rates of Table 06017, the costs of installing air valves are not taken into account, the specified costs should be determined at the rates of Table 06-012.

1.21. The installation of aggregates of dust collecting, filters, scrubbers and cyclones is provided at an altitude of up to 1 m from the floor; The gasket of air ducts and the installation of air distribution devices, fans, calorificates and air-heating units at an altitude of up to 3 m. When working with scaffolding, forests and stairs at high altitude, the coefficients shown in section 3 of the technical part are used.

The device in accordance with the project of the production of forests or solid flooring should be determined by the column of Ter2001-08 St. Petersburg "structures of brick and blocks".

1.22. Costs for individual tests of ventilation and air conditioning systems are accepted in the amount of 5% of the wages of the workers and the cost of operation of machines, taken into account in the rates for the device of the specified systems.

1.23. The size of "before" specified in this collection includes this size.

Ter-2001-20 SPB Ventilation and air conditioning

2. Rules for the calculation of work volumes

2.1. The amount of work on laying the air ducts is calculated in the m. KV. The surface of the air ducts (direct sections and shaped parts).

2.2. The length of the air ducts is measured between the points of intersection of axial lines.

3. The coefficients for single rates

Terms of application Table number (rates) Laying air ducts at height from gender, m: sv. 3 to 5 sv. 5 to 8 sv. 8 to 10 Laying air ducts for nuclear power plants from floor, m: sv. 3 to 5 sv. 5 to 8 sv. 8 to 10 Gasket of the air ducts of class N and n from corrosion-resistant steel 01-001 (1,2,4); 01-002 (1,2,4 01-001 (3, 5,9); 01-002 (3, 5, 9) 01-001 (6,7,10); 01-002 (6, 7, YU) 01-001 (8,11,12,18); 01-002 (8, 11, 12,18,22, 23) 01-001 (13,16,19); 01-002 (13,16,19) 01-001 (14,15); 01-002 (14, 15) 01-001 (17); 01-002 (17) Installing aggregates of dust holding and scrubber at height from the floor, m: sv. 1st to 3 sv. 3 to 6 sv. 6 to 8

	Terms of application	Table number (rates)	Coefficients to labor costs and labor payments
	Installing filters at height from floor in m:
	sv. 1st to 3
	sv. 3 to 6
	sv. 6 to 8
	Installation of cyclones at height from the floor, m:
	sv. 1st to 3
	sv. 3 to 6

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

Section 01. Air Ducts Metal Table 20-01-001. Laying air ducts from sheet, galvanized steel and aluminum class H (normal)

Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.5 mm, diameter up to 200 mm Metal air ducts Turnsel valves in nozzle Fastening Grids within Pithelter sticks Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.5 mm, perimeter up to 600 mm Metal air ducts Turnsel valves in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinist "	materials

	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.5 mm, perimeter
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and
	aluminum class H (normal) thickness: 0.6 mm, diameter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.6 mm, diameter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.6 mm, diameter up to 450 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, diameter from 500 to 560 mm Metal ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, diameter up to 800 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

System of regulatory documents in construction

BUILDING REGULATIONS
RUSSIAN FEDERATION saint Petersburg

Ter 81-02-20-2001 St. Petersburg

Approved and put into effect from January 1, 2002
Order of the Committee of Economics and Industrial Policy
Administration of St. Petersburg from 09/07/2001 No. 223

Territorial unit rates
on construction work

Ter-2001 St. Petersburg

Collection number 20.

Ventilation
and air conditioning
air

Administration of St. Petersburg
St. Petersburg
2001

Designed to determine direct costs in the estimated cost of performing work on the device for ventilation systems, air conditioning and air heating and the preparation of estimated calculations (estimates), as well as for calculations for completed construction work.

Developed by the St. Petersburg Regional Center for Pricing in the construction of the RCCS St. Petersburg (P.V. Goryachkin - Head, E.E. Dyachkov, L.A. Danilova, N.N. Kalinko, V.M. Semkov, E.N. Fedotova ) with the participation of specialists - A.P. Ivanov (AOOT "Stroy-corporation of St. Petersburg), A.A. Kozlovskaya, S.M. Beller (OJSC Institute Lenniyproekt).

Approved and put into effect from January 1, 2002 by order of the Committee of Economics and Industrial Policy of the Administration of St. Petersburg dated September 7, 2001 No. 223

Territorial unit rates
On construction work

Collection number 20.

Ventilation and air conditioning

Ter-2001-20 SPb

TECHNICAL PART

1. General instructions

1.1. Real territorial unit rates for construction work for use in St. Petersburg in basic prices for January 1, 2000 are intended to determine direct costs in the estimated cost of performing work on the device for ventilation systems, air conditioning and air heating and the preparation of estimated calculations (estimates), and Also for calculations for the construction work performed.

1.2. Ther reflect the average industry level of costs for adopted equipment, technology and organization of work on each type of construction work and, in this regard, can be used to determine the estimated cost of construction by all customers and contractors regardless of their departmental subordination and organizational and legal form.

1.3. Rates for this collection are applied to work on the device for ventilation systems (general and local), air conditioning and air heating in residential, public, production and auxiliary buildings of industrial enterprises, regardless of the material of walls, overlaps and partitions.

1.4. Installation of equipment for technological purposes (fans, cyclones, scrubbers, etc.) is determined by the collections of the thermal-2001 SPb on the installation of equipment.

1.5. The rates provide a full range of basic and auxiliary work on the laying, installation and attachment of the corresponding elements of systems, including the acquisition, installation and removal of rigging devices, drilling holes for fasteners, manufacture of rubber gaskets, and the like.

The gasket of air ducts is provided in the presence of finished through holes in the walls, partitions and overlaps. Inserting holes after the passage of the air ducts by rates of the collection is not taken into account.

1.6. The rates of tables 01-001 and 01-002 are provided for a gasket of class H air ducts (normal) and class P (dense) from sheet, galvanized steel and aluminum. For air ducts, the corresponding rates of tables 01-001 and 01-002 apply to the coefficients given in section 3 of the technical part.

1.7. Primary coloring or primer of air ducts and ventilation products provided for by the technical conditions is performed by manufacturers.

1.8. Installation of throttle valves in nozzles, seams, grids in the framework of pitchers and brackets and fasteners are taken into account in the rates for gasket of air ducts; Their number, types and sizes of the specified products take according to project data.

1.9. When connecting the air ducts of a rectangular cross section (on tires) with brackets at the rates of tables 01-001, 01-002, the bolts should be deleted with the addition of a project bracket.

1.10. In the rates of Tables 02-005 and 02-006, an installation of air deficient valves, valves of type of KVV and similar structures is provided.

1.11. In the rates of Table 02-007, the installation of valves of the KVU type and similar structures is provided.

1.12. In the rates of tab. 02-012 At the installation of deflectors, the installation of stretch marks with tallrepa, the number of stretch marks and tallons to receive by project data is taken into account.

1.13. Rates for tables 03-001¸03-003 apply to radial fans, axial and roofs regardless of the material from which they are made (carbon steel, corrosion-resistant or aluminum).

1.14. In the rates of table 03-001¸03-003 and 06-015, the costs of revision, drying and the attachment of the electric motors to the network are not taken into account on the installation of fan, axial-axial, roof and fan aggregates. These costs should be determined by the Column of Term-2001-08 SPB "Electrical Installations".

1.15. Installation and consumption of vibration insulators rates of tables 03-001¸03-003 are not taken into account. The cost of installing vibration insulators should be determined at the rates of Table 02-020.

1.16. In the rates of tables 03-001 and 06-015, the costs of installing flexible inserts are not taken into account. Installation of flexible inserts should be determined by the rates of Table 02-018.

1.17. The rates of Table 05-001 take into account the costs of installing cell filters (metal and paper) and aerosol (with FP filtering material) installed on the supply and exhaust ventilation systems.

1.18. Ralance 1 Table 05-001 On the installation of cellular filters, the frame setting is not taken into account.

1.19. The rates of the collection are not taken into account the costs of installing fans, filters of suction, cyclones of batteries, shutters of sluice, unloaders, etc. devices installed in aspiration systems and pneumatic transport in granaries, grain processing enterprises and other industries and are determined by the collections of the term-2001 SPB for installation equipment.

1.20. In the rates of Table 06-017, the costs of installing air valves are not taken into account, the specified costs should be determined at the rates of Table 06-012.

1.21. The installation of aggregates of dust collecting, filters, scrubbers and cyclones is provided at an altitude of up to 1 m from the floor; The gasket of air ducts and the installation of air distribution devices, fans, calorificates and air-heating units at an altitude of up to 3 m. When working with scaffolding, forests and stairs at high altitude, the coefficients shown in section 3 of the technical part are used.

The device in accordance with the project manufacturing works of forests or solid flooring should be determined by the column of Ter-2001-08 SPB "Constructions of brick and blocks".

1.22. Costs for individual tests of ventilation and air conditioning systems are accepted in the amount of 5% of the wages of the workers and the cost of operation of machines, taken into account in the rates for the device of the specified systems.

1.23. The size of "before" specified in this collection includes this size.

2. Rules for the calculation of work volumes

2.1. The amount of work on laying the air ducts is calculated in the m. KV. The surface of the air ducts (direct sections and shaped parts).

2.2. The length of the air ducts is measured between the points of intersection of axial lines.

Estimated - regulatory framework

"State Stallon"

Ter-2001 St. Petersburg

Collection number 20.

Official edition

Government of St. Petersburg Committee of Economic Development, Industrial Policy and Trade St. Petersburg State Institution "Center for Monitoring and Examination of Prices"

st. Petersburg 2008

System of regulatory documents in construction

saint Petersburg

Territorial unit rates for construction work

Ter-2001 St. Petersburg

Collection number 20.

Ventilation and air conditioning

Government of St. Petersburg Committee of Economic Development, Industrial Policy and Trade, St. Petersburg State Studies "Center for Monitoring and Examination of Prices"

st. Petersburg 2008

rates			Including rubles
				masher operation)		materials
unaccounted materials					machineist	materials

	Laying air ducts
	Thick: 0.7 mm, perimeter 900
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, perimeter from
	1100 to 1600 mm
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				masher Operation *		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinist	materials

	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, perimeter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, perimeter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal)
	thick: 0.7 mm, perimeter 4000 mm
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Masht.		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal)
	thick: 0.9 mm, perimeter 3700 mm; from 4100 to 4500 mm
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.9 mm, perimeter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				masher operation)		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinist	materials

	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 1.0 mm, diameter from
	900 to 1000 mm
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 1.0 mm, diameter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 1.2 mm, diameter 1400
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machine!	materials

Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.5 mm, diameter to Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.5 mm, perimeter to Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.6 mm, diameter to Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.6 mm, diameter to Metal air ducts Turnsel valves in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) thickness: 0.7 mm, diameter from 500 to 560 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts galvanized steel sheet and aluminum class n (dense) thick: 0.7 mm, diameter to Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter 900 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter from 1100 to 1600 mm Metal ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter up to 2400 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts from sheet galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter up to 3200 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter up to 3600 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.7 mm, perimeter 4000 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Masht.		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.9 mm, perimeter 3700,4100-4500 mm Metal ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.9 mm, perimeter up to 5200 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 0.9 mm, perimeter up to 7200 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

Laying air ducts sheet, galvanized steel and aluminum class H (normal) thickness: 1.2 mm, diameter 1600 Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

Table 20-01-002. Laying air ducts from sheet, galvanized steel and aluminum class P (dense) Meter: 100 m2 Duct surfaces

Territorial unit rates for construction work Ter-2001-20 SPB Ventilation and air conditioning.

/ SPB GU "Center for Monitoring and Examination of Prices" / St. Petersburg, 2008.

These territorial unit rates (SPB Ter-2001) are intended to determine direct costs in the estimated cost of construction work when performing work on the device for ventilation systems, air conditioning and air heating.

Developed by the St. Petersburg State Institution "Center for Monitoring and Examination of Prices"

Approved and implemented by the Committee of Economic Development, Industrial Policy and Trade Order No. 233 of September 7, 2001.

Registered: in the Federal Agency for Construction and Communal Economy (Rosstroy) in the prescribed manner.

In exchange: territorial single rates for construction work Ter-2001 / Administration of St. Petersburg / St. Petersburg, 2001.

Present territorial unit rates for construction work Ter-2001 SPB cannot be partially reproduced, replicated and distributed as an official publication without permission of the Committee for Economic Development, Industrial Policy and Trade

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 1.0 mm, diameter from 900 to 1000 mm Metal ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 1.0 mm, diameter up to 1250 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks
	Laying air ducts from galvanized steel and aluminum class P (dense) thickness: 1.2 mm, diameter 1400 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks

Estimated regulatory framework

_ "State Stallon" _

Territorial unit rates for construction work

Collection MS 20 Ventilation and Air Conditioning Ter-2001-20 SPb

TECHNICAL PART

General provisions

1. Real territorial unit rates for construction work for use in St. Petersburg in basic prices for January 1, 2000 are intended to determine direct costs in the estimated cost of performing work on the device for ventilation systems, air conditioning and air heating and composing estimated calculations (estimet) , as well as for calculations for completed construction work.

1.2. Ther reflect the average industry level of costs for adopted equipment, technology and organization of work on each type of construction work and, in this regard, can be used to determine the estimated cost of construction by all customers and contractors regardless of their departmental subordination and organizational and legal form.

1.3. Rates for this collection are applied to work on the device for ventilation systems (general and local), air conditioning and air heating in residential, public, production and auxiliary buildings of industrial enterprises, regardless of the material of walls, overlaps and partitions.

1.4. Installation of equipment for technological purposes (fans, cyclones, scrubbers, etc.) is determined by the collections of therm2001 SPb on the installation of equipment.

1.5. The rates provide a full range of basic and auxiliary work on the laying, installation and attachment of the corresponding elements of systems, including the acquisition, installation and removal of rigging devices, drilling holes for fasteners, manufacture of rubber gaskets, and the like.

The gasket of air ducts is provided in the presence of finished through holes in the walls, partitions and overlaps. Inserting holes after the passage of the air ducts by rates of the collection is not taken into account.

1.6. The rates of tables 01-001 and 01-002 are provided for a gasket of class H air ducts (normal) and class P (dense) from sheet, galvanized steel and aluminum. For air ducts from corrosion-resistant steel, appropriate rates of tables 01-001 and 01-002 are used, taking into account the coefficients shown in section 3 of the technical part.

1.7. Primary coloring or primer of air ducts and ventilation products provided for by the technical conditions is performed by manufacturers.

1.8. Installation of throttle valves in nozzles, seams, grids in the framework of pitchers and brackets and fasteners are taken into account in the rates for gasket of air ducts; Their number, types and sizes of the specified products take according to project data.

1.9. When connecting the air ducts of a rectangular cross section (on tires) with brackets at the rates of tables 01-001, 01-002, the bolts should be deleted with the addition of a project bracket.

1.10. In the rates of Tables 02-005 and 02-006, an installation of air deficient valves, valves of type of KVV and similar structures is provided.

1.11. In the rates of Table 02-007, the installation of valves of the KVU type and similar structures is provided.

1.12. In the rates of tab. 02-012 At the installation of deflectors, the installation of stretch marks with tallrepa, the number of stretch marks and tallons to receive by project data is taken into account.

1.13. Table rates 03-001 - 03-003 are applied to radial fans, axis and roofs regardless of the material from which they are made (carbon steel, corrosion-resistant or aluminum).

1.14. In the rates of Table 03-001 - 03-003 and 06-015, the costs of revision, drying and the attachment of the electric motors to the network are not taken into account on the installation of fan, axial, roof and fan aggregates. These costs should be determined by the Column of Term2001-08 SPB "Electrical Installations".

1.15. Installation and consumption of vibration insulators Rates of Tables 03001 Chosozosis are not taken into account. The cost of installing vibration insulators should be determined at the rates of Table 02-020.

1.16. In the rates of tables 03-001 and 06-015, the costs of installing flexible inserts are not taken into account. Installation of flexible inserts should be determined by the rates of Table 02-018.

1.17. The rates of Table 05-001 take into account the costs of installing cell filters (metal and paper) and aerosol (with FP filtering material) installed on the supply and exhaust ventilation systems.

1.18. Ralance 1 Table 05-001 on the installation of filters of cellular installation of the frame

1.19. The rates of the collection are not taken into account the costs of installing fans, filters of suction, cyclones of batteries, shutters of sluice, unloaders, etc. devices installed in aspiration systems and pneumatic transport in granaries, grain processing enterprises and other industries and are determined by the collections of the term-2001 SPB for installation equipment.

1.20. In the rates of Table 06017, the costs of installing air valves are not taken into account, the specified costs should be determined at the rates of Table 06-012.

1.21. The installation of aggregates of dust collecting, filters, scrubbers and cyclones is provided at an altitude of up to 1 m from the floor; The gasket of air ducts and the installation of air distribution devices, fans, calorificates and air-heating units at an altitude of up to 3 m. When working with scaffolding, forests and stairs at high altitude, the coefficients shown in section 3 of the technical part are used.

The device in accordance with the project of the production of forests or solid flooring should be determined by the column of Ter2001-08 St. Petersburg "structures of brick and blocks".

1.22. Costs for individual tests of ventilation and air conditioning systems are accepted in the amount of 5% of the wages of the workers and the cost of operation of machines, taken into account in the rates for the device of the specified systems.

1.23. The size of "before" specified in this collection includes this size.

Ter-2001-20 SPB Ventilation and air conditioning

2. Rules for the calculation of work volumes

2.1. The amount of work on laying the air ducts is calculated in the m. KV. The surface of the air ducts (direct sections and shaped parts).

2.2. The length of the air ducts is measured between the points of intersection of axial lines.

3. The coefficients for single rates

Terms of application Table number (rates) Laying air ducts at height from gender, m: sv. 3 to 5 sv. 5 to 8 sv. 8 to 10 Laying air ducts for nuclear power plants from floor, m: sv. 3 to 5 sv. 5 to 8 sv. 8 to 10 Gasket of the air ducts of class N and n from corrosion-resistant steel 01-001 (1,2,4); 01-002 (1,2,4 01-001 (3, 5,9); 01-002 (3, 5, 9) 01-001 (6,7,10); 01-002 (6, 7, YU) 01-001 (8,11,12,18); 01-002 (8, 11, 12,18,22, 23) 01-001 (13,16,19); 01-002 (13,16,19) 01-001 (14,15); 01-002 (14, 15) 01-001 (17); 01-002 (17) Installing aggregates of dust holding and scrubber at height from the floor, m: sv. 1st to 3 sv. 3 to 6 sv. 6 to 8

	Terms of application	Table number (rates)	Coefficients to labor costs and labor payments
	Installing filters at height from floor in m:
	sv. 1st to 3
	sv. 3 to 6
	sv. 6 to 8
	Installation of cyclones at height from the floor, m:
	sv. 1st to 3
	sv. 3 to 6

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

Section 01. Air Ducts Metal Table 20-01-001. Laying air ducts from sheet, galvanized steel and aluminum class H (normal)

Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.5 mm, diameter up to 200 mm Metal air ducts Turnsel valves in nozzle Fastening Grids within Pithelter sticks Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.5 mm, perimeter up to 600 mm Metal air ducts Turnsel valves in nozzle Fastening Grids within Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinist "	materials

	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.5 mm, perimeter
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and
	aluminum class H (normal) thickness: 0.6 mm, diameter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks
	Laying air ducts
	sheet, galvanized steel and aluminum class H (normal) thickness: 0.6 mm, diameter to
	Metal air ducts
	Valve throttle in nozzle
	Fastening
	Grids within
	Pithelter sticks

rates	Name and characteristics of construction works and structures		Including rubles
				operation Mashsh		materials
unaccounted materials	Name and characteristics of unaccounted rates of materials, unit of measurement				machinists	materials

Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.6 mm, diameter up to 450 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, diameter from 500 to 560 mm Metal ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks Laying air ducts from sheet, galvanized steel and aluminum class H (normal) thickness: 0.7 mm, diameter up to 800 mm Metal air ducts Valve throttle in nozzle Fastening Grids within Pithelter sticks