A bright bouquet of roses will bring revival to any environment, this is the central accent that attracts everyone's attention. If a live rose wilts quickly, there are many options to make it out of paper. Consider the easiest options for how to make a paper rose with your own hands.

You can involve children in needlework, they will be happy to choose a beautiful rose, and a joint lesson will entertain the whole family and develop creative abilities.

The easiest method #1 from plain paper

We offer a master class with a description for beginners, it will not take much time. Prepare for a flower: scissors, red (pink) thick paper, glue (adhesive tape), dry twigs and a small vase.

• Cut out a square of paper with sides of 10 cm (the color of the rose depends on the selected paper).
• Draw a spiral over the entire square with a pencil, it is better to start from a point in the center, as in the photo.
• Cut along the spiral line with scissors.
• Now from the outer corner we begin to turn the spiral.
• Twist the resulting bud (or opened flower) tightly, glue the tip for strength.

The rosette is ready, you can start making leaves.

• Cut out a large sheet with sharp edges, glue it to the flower.
• Then carefully plant the flower on a twig.

Make a few flowers with leaves and put in a prepared vase.

Method #2 - Origami

It will take about 5 minutes to make a rose, but a whole bouquet with leaves looks more effective. Choose 30 minutes to take your time with the kids.

Prepare: thick colored paper (red, purple, yellow, etc.) A4 size, PVA glue (adhesive tape), scissors.

Step by step instructions on how to make a rose:

• Along the entire length of the A4 sheet, cut long strips about 1 cm wide.
• Take 1 strip and make folds inside the sheet, as in the diagram.
• The fold angles do not need to be done exactly, let them be different, the more unique the rose will be.
• We carefully begin to fold our workpiece from the folded edge, without going to the free part.
• When you reach the untouched area of ​​the leaf, first bend the strip (see photo), then continue to fold the flower.
• At the end (the rose will be with different angles), the “tail” can be glued to the base of the rose.

• Fold the sheet (A4) in half along the sheet, then in half again. You should get 4 identical stripes.
• Cut the strips with scissors.
• We glue the ends of the strips with tape to make 1 long strip.
• We twist this strip to make a long stem of the flower.

The stem (leg) for the flower is ready. You can use dry twigs, twigs, wrap the wire with green paper. Fix a rose on a branch (leg), put a bouquet in a flowerpot.

Method number 3 from corrugations

Incredibly spectacular flowers made of corrugated paper. This is a compressed canvas that can stretch. To make rosettes, paper made in Italy is better, it stretches better than Chinese or Taiwanese.

We will analyze in detail how to make a rose from corrugated paper.

Cook:

• pink corrugated paper (if made in Italy, then No. 569), etc.;
• green paper;
• wire (with winding);
• thin wire;
• ordinary plasticine;
• strong threads (any color);
• scissors;
• glue gun with 1 rod;
• wire cutters;
• a piece of foil 18x14 cm.

Stages of work:

• Put a plasticine ball on a thick wire, then wrap it with foil. Set aside for the time being. Get the middle of the rose.
• We prepare rose petals, for this you need to cut out rectangles of different sizes from pink paper:
• 7 pieces of 3.5 x 8 cm;
• 6 pieces of 3 x 6 cm;
• 5 pieces of 2.5 x 6 cm;
• 1 piece - 5 x 6 cm.

Important! You need to cut the pieces across the roll! Then cut off the upper corners and the lower part, the petal will turn out to be semicircular with a flat base. The direction of the corrugation should be along the petal!

Then you need to stretch the petals, with your thumbs press on the central part, stretching the edges to the sides. The petal should curl up.

Now wrap 3-4 petals around the foil, fasten with threads at the base. Glue 1 petal in turn, each time with a slight shift. We take first narrow petals, then wide ones. When the rose is ready, all the petals are fixed with threads below, you need to cut the corners.

Sepal (rose base): cut out a 10 x 6 cm rectangle from green paper. Make sharp teeth on one side of the green strip, twist the ends a little. Wrap the bottom of the rose with green sepals, securing firmly with threads. Cut off excess, if any.

Cut out 2 thin strips of green paper for the flower stem, 1-1.5 cm wide. Wrap the rose stem to the middle, do not cut. We make leaves according to the template - 12 pieces. Prepare 1 long wire (20 cm) and 2 x 10 cm.

Then you need to glue 2 halves of the sheet by threading a thin wire into it, so make 3 blanks, one of them will be longer. Then we connect all 3 wires together and wrap them with green paper in a group. Be sure to secure with glue.

We wrap the remaining end of the green paper to the end of the rose stem. So beautifully hide all the "tails" of the leaves. Our rose is ready.

It is better to do more to create a whole bouquet of roses, you can use different colors. With each rose you will get better, neater and faster.

You can find many other interesting ideas for paper roses, we have chosen the simplest ways of execution. The main thing is your imagination, even the same roses made of multi-colored paper will look new.

Original flower options in the photo: how to make a rose out of paper.

The Queen of Flowers has always attracted attention, was a welcome gift and decoration. Poems and legends are composed about it, chic bouquets are made from it.

Many needlewomen are interested in how to make paper roses with their own hands. It will take more time and skill to create this flower than simple plants.

Consider several options for making an amazing flower.

Gorgeous bouquet as a gift

On cardboard, draw a whisk in the form of a spiral with a pencil. Then take scissors and cut out the pattern. The result should be a spring. The pattern is used to obtain blanks from colored material.

You should prepare the wire for the pedicel in advance. A little glue is applied to the edge of the future stem. The required number of buds is made, and then a bouquet is made.

exquisite flower

Fold the square of the selected shade in half diagonally. Then a petal is cut out of the resulting triangle. Having unfolded it, the master will see that the corolla with 8 petals has turned out.

4 blanks should be made. Each detail needs to be finalized by cutting off 1, 2, 3 and 4 petals, respectively. The rims are glued so that the extreme elements are fastened together.

The result will be parts with 2, 4, 5 and 6 petals. Using a pencil, the edge of each of them is slightly bent. Then the bud is assembled. Leaves are cut out of green material and glued to the bud.

Corrugated Paper Rose

The original decoration will decorate the interior of any home. Interesting photos of paper roses will allow you to find your own option for creating beautiful compositions.

For the corrugated version, you will need green and red material, stem tape, wire, scissors.

Cut out five elements in the form of drops and 15 details in the shape of a heart. The blanks are gently stretched along the edges. The bud is formed by alternately gluing the petals.

The elements are fixed with adhesive tape. Complement the product with green leaves that are attached to the stem of the plant.

Now it will be clear to the novice master how to make a rose from corrugated paper. Based on this product, you can get other options. To do this, just slightly modify the pattern of the petals.

Beautiful paper flower

The sheet is cut into strips of 1 cm. The width determines the size of the future souvenir. The edge should be bent diagonally, twisting the rose.

The bud is held together with glue during the manufacturing process. Several plants of the same or different colors allow you to create unique bouquets for decorating your home.

Rose from money

For a souvenir, you will need printed banknotes. To get a neat product, you need to follow the step-by-step instructions for making paper roses. A sheet of material is folded in the center and pulled together with wire, having previously turned the corners.

You need to make 4 parts, which are then easy to connect into a bud. The wire is twisted, as a result, the stem of the plant is formed.

big rose

The following materials will be used in the work: corrugated paper, wire, tape, glue.

Draw pattern patterns yourself by observing real plants. You can print ready-made patterns, cut them out and transfer them to cardboard.

A growth rose made of paper looks unusual at any celebration. If you create several copies, you get a huge bouquet.

For one product, you will need 15 heart-shaped elements and 5 drop-shaped parts. The resulting petals must be given the desired shape. The hearts are stretched a little, and the droplets are wound onto a pencil.

Two pieces of thick wire are wrapped with special adhesive tape. Then a bud is formed. A sepal is placed at the base. The leaves are alternately attached to the stem with a ribbon.

royal rose

For a beautiful accessory, you will need napkins of different colors, a ribbon, a regular pencil. This simple method will allow you to create an original gift.

The napkin is wrapped around a pencil. It needs to be compressed. After that, the pencil is pulled out. The result should be six finished parts that are fastened with tape. Then a corolla of 6 petals is formed.

Crepe paper flowers

This material is very similar to corrugated paper, but it is softer. The result is more delicate artificial plants.

Twisting is the basis for making souvenirs from this material. This option is ideal for beginners.

It is necessary to take a tape 5 cm wide and scissors. You will need glue to hold the button together. The tape is folded, corners are cut off from one edge to get a petal.

Then the process of winding onto a pencil begins, as a result a whisk is formed. Several blanks can be used for beautiful crafts, gift decoration.

Conclusion

Simple flower making techniques help beginners master the technique of paper flower making. This is an amazing hobby that adults and children will enjoy.

With the help of different patterns, large and small flowers, paper rosebuds, and growth products are obtained. They make a great gift for a birthday or any other occasion.

Any event can be decorated with original crafts and bright flower arrangements.

Photo of paper roses with your own hands

Huge flowers in the interior are an excellent solution for a fairy tale performance, a birthday of a young princess and just a fun photo shoot with friends. Don't delay until tomorrow, start making crepe paper roses right now!

You will need:

• corrugated paper (pink and green),
• wire or long thin sticks for stems,
• green floral tape,
• scissors.

Before starting work, make a heart template for rose petals. Choose the size of your choice.

1. Transfer the template to the crepe paper. To speed up the process, fold it several times, fix it in the corners with a stapler, attach a template and cut out the petals. You will need about 10 of these hearts.

Need to know! When cutting the petals, keep in mind that the corrugation should go along the petal so that it can be easily stretched in width.

2. Gently stretch each heart as shown in the photo.

3. Wrap the wire with floral tape.

4. Screw the tops of the hearts onto the handle.

5. Now wrap one of the petals around the stem of the rose and secure it with teip tape. Do the same with the other petals. Make sure that each petal is securely fixed.

6. To make leaves, take a few pieces of wire, wrap them with teip tape and attach pre-cut corrugated leaves.

7. Make a sepal from green corrugated paper, attach it to the flower. Do the same with rose leaves.

A luxurious rose is ready to become the highlight of the interior, and maybe even the star of a photo shoot.

Corrugated paper roses in shabby chic style

Little cute details always make the house a little warmer and cozier. And the queen of flowers in the style of shabby chic will certainly not hurt anyone. The main thing is to choose gentle, light colors that are characteristic of this style.

By the way! The shabby chic style was invented by Englishwoman Rachel Ashwell in the 1980s. She bought old furniture and decorated it to her liking, giving the appearance of antiquity. Soon, pastel-colored furniture restored by a woman became mega-popular. This is how the romantic style of shabby chic appeared, which means “shabby shine”.

You will need:

• pink and green crepe paper
• teip tape,
• wire.

1. Cut a long strip from pink corrugated paper. To speed up the process, you can not unroll the roll.

2. Make curly edges for the rosette. To do this, wrap the corner of the paper twice and twist it like a candy.

Do you have any questions? The video will reveal the secrets of making a curly edge for corrugated paper roses.

4. Cut out a thin long strip of green paper and wrap the stem (wire) around it. Cut out a leaf from the lettuce and also attach it to the stalk.

Rose is ready!

Make a lot of delicate corrugated paper roses and put them in a basket on a table by the window. It will be very beautiful!

Beautiful corrugated paper rose

Even one rose can add bright colors to a boring interior. Standing alone in a vase, it will bring the smell of the morning garden into the house and bring back long-forgotten memories...

You will need:

• corrugated paper (green and two shades of pink),
• wire,
• glue gun,
• round pencil,
• teip tape,
• banknote rubber,
• artificial rose leaves

1. First make a bud (middle) of a flower: cut off a rectangular pink strip, fold in half, cut off the corners.

2. Gently stretching the upper edge of the petal, wrap it in a bud. Insert the stem wire. Secure with a rubber band. You can hide a candy in the middle of the flower. Bud is ready!

3. Fold the deep pink paper several times to make a larger rectangle than the previous corrugated strip. Cut out 4 petals, stretch the middle of each, twist the top with a pencil.

4. Collect the flower. But that is not all.

5. Cut out four heart-shaped petals from soft pink paper. Stretch and twist similarly to the previous ones. Wrap the flower, secure with teip tape. I'm sure you will succeed!

6. Now make a sepal, secure it with floral tape at the bottom edge of the flower and wrap it around the entire stem. If there is no teip tape at hand, use a long strip of green corrugation.

Attach purchased rose leaves to the stem. That's all - the charming queen of flowers is ready to win the hearts of your guests.

How to make other paper flowers, see here:

The rose is a symbol of love and beauty. Every romantic would like to have an unfading rose. Unfortunately, fresh flowers are capricious and short-lived. They are easily replaced by paper ones: they are not so fragile, they do not require special attention, but in beauty they are in no way inferior to living ones. From paper roses you can make a bouquet, weave a wreath, attach it to a gift, decorate a festive table or put it in a vase. Romantic natures often wonder how to make a paper rose with their own hands. Very easy, even a child who has barely learned how to use scissors can handle it.

With scissors and glue

The easiest way is to draw a spiral on a piece of paper. Then you need to cut.

The end of the spiral is folded into a tube (you can use the pencil with which the spiral was drawn), and the other end is attached with glue.

Below are some diagrams:

We use paper

For the manufacture of roses, you can use any paper: from ordinary newspaper to cardboard. But the petals made of corrugated paper, more than all the rest, look like living ones.

Due to its structure, corrugated paper allows the craftswoman to give the petals a resemblance to the original. How to make such a rose is described in stages, with a photo.

For work you will need everything that you see in the photo.

You need to take two types of paper: green for the stem, and for the bud, you can choose any color. A strip 7-8 cm wide and more than half a meter long is cut off.

Attention! Corrugated veins should be along the strip, and not across.

The paper tape is rolled up two fingers wide.

Then one end of the roll is cut with scissors in a semicircle.

It is divided exactly in the middle, while incisions are made, not reaching the opposite end of about 1 cm.

Now the roll needs to be unrolled and begin to form the petals. From one edge they turned out smaller - this will be the middle of the rose. They need to be pulled slightly to form a bulge.

The remaining petals along the edge are stretched along.

To give an even greater resemblance to a living rose, the edges of the petals are tucked inward with a thin metal rod.

The ribbon should look like this:

At the next stage, a piece of wire is wrapped in a loop.

A tape is wound on it - a blank, starting with the smallest petal.

The bottom edge is trimmed. When the tape is assembled, the roll is pulled along the bottom with a thread.

The petals are carefully spread out, forming a flower.

Now you can begin to form the stem. To do this, you need a piece of green corrugated paper 7-8 cm high and more than 10 wide.

Long teeth are cut out of it.

For one rose, you need 5 cloves. Each triangle is pinched at the tip and stretched along.

The formed cup is glued to the base of the bud.

The next strip 2 cm wide is stretched along and smeared with glue.

It wraps tightly around the bud and wraps around the wire in a spiral, forming a stem.

From the same green paper, leaves are cut out measuring 3 by 4 cm.

Veins are pressed into them with a pencil, the leaves are given a convex shape. From a strip of paper smeared with glue, a thin tube is formed, to which the leaves are glued.

Roses are wonderful flowers with a wonderful aroma that are very popular. It is a pity that they quickly wither and do not please with their beauty for long. In this article we will look at: how to make simple paper roses with your own hands.

You will need: double-sided colored paper, a simple pencil, a sheet of paper, scissors, a glue gun, wire.

Master Class

Gorgeous roses are ready!

Exquisite rosette

You will need: orange and green colored paper, scissors, a simple pencil, glue.

Master Class

Corrugated Paper Rose

You will need: pink and green corrugated paper, green adhesive tape, stick or wire for the stem, scissors.

Master Class

Colored paper roses

You will need: colored paper, ruler, scissors and glue.

Master Class

Origami rose

You will need: double-sided colored paper, scissors, a simple pencil.

Master Class

1. Fold a sheet of colored paper diagonally as shown in the photo and cut off the excess strip to make a square.
2. Bend the square to form a second diagonal.
   
   
3. Bend the square in half to form lines like a snowflake.
4. Move the sides of the workpiece in this way: the top - from the right side to the left, and the bottom - from the left to the right, to make a triangle.
5. Bend all 4 peaks to the middle and run your fingers along the folds.
6. Expand the workpiece to a double triangle and fold the top corner back.
   
   
7. Spread the bud and bend the folded corner inward.
8. Gather the double corner back and run your fingers through the folds.
9. Raise 4 side corners to the top.
   
   
10. Flip over, then fold each side to the center to the middle. You should get a blank with a hole at the bottom.
11. Blow strongly into the hole from below to straighten the bud.
12. Twist the petals using a simple pencil.
    
    
13. Take the strip of paper cut off at the beginning.
14. Fold the stem and insert it into the bud.

Roses from money

You will need: printed banknotes of any denomination, wire.

Master Class

original roses

You will need: red colored paper, a simple pencil, scissors, a round object.

Master Class

1. Trace a round object on colored paper.
2. Draw a spiral in the circle.
3. Cut out the circle.
4. Cut the spiral in such a way that you get a "spring"
5. Twist the rosette, in the same way make the desired number of roses.

Original colored paper roses are ready! I recommend watching the video master class!

huge rose

You will need: thick cardboard, corrugated paper, a simple pencil, scissors, thick wire, green floral tape, adhesive tape, glue.

Master Class

1. Draw or print templates and transfer them to thick cardboard.
   
   
2. Cut out 15 heart-shaped petals and 5 droplets from crepe paper (for one flower).
   
   
3. Shape the petals: hearts - stretch a little to the sides, and twist the droplets using a pencil.
   
   
4. Take 2 pieces of thick wire and wrap with floral tape.
5. Glue a piece of crepe paper to the stem as a core.
6. Form a bud: glue drops, then hearts, fix with adhesive tape.
   
   
7. Cut out a sepal from green crepe paper as shown in the picture.
8. Secure the sepal at the base of the flower using duct tape.
   
   
9. Cut out the leaves and glue them to the stem.

royal rose

You will need: yellow napkins, pencil, blue napkin, ribbon.

Master Class

giant roses

You will need: colored thick paper, a sheet of cardboard, scissors, glue.

Master Class

1. Create templates for the petals: 6 large, 6 medium and 6 small.
2. Cut out the petals.
   
   
3. Make cuts at the base of the petals.
4. Fold the ends of the petals away from you.
5. Turn the petals over and glue the ends next to the notch, forming a natural petal shape.
   
   
6. Glue 6 large petals together in a circle.
7. Glue the medium petals, and then the small ones.
   
   
8. Glue a sheet of cardboard to the bottom of the flower.
9. Fold the sheet in half and cut the "brush" from the side of the fold. Repeat this process with two more sheets.
10. Peel off and unfold the cut sheets.
    
    
11. Fold the first sheet, then add the rest to make the core.
12. Glue the core to the center of the flower.
13. Make the desired number of roses in the same way.

Red roses

You will need: red and green corrugated paper, scissors, wire, thread and glue.

Master Class

1. Cut a strip of red crepe paper 58 cm long and 19 cm wide.
2. Fold together, the sides are long and glue the underside (along the grain of the paper) with glue.
   
   
3. Glue the halves.
4. Make a blank for the petals from cardboard. The dimensions of the template are indicated in the image.
5. Fold a strip of red crepe paper like an accordion, attach a cardboard petal template and cut it out. For one rose, there should be 15 petals.