Obviously, when creating a bathroom interior, only moisture-resistant finishing materials can be used. Finishing the ceiling in the bathroom is also made with this principle in mind. At first glance, this circumstance imposes restrictions on the choice of materials and design features of facing surfaces.

In fact, there are now so many options for arranging ceilings and so many types of moisture-resistant materials that almost any design idea can be realized when decorating a bathroom. The most popular types of such ceiling coverings will be considered below.

Bathroom ceiling painting

The advantages of this method of finishing the ceiling can also include:

• cheap paint;
• cheapness and availability of painting tools;
• maintaining the original height of the ceiling.

Stages of painting work

• Surface cleaning. It is necessary to remove old paint or whitewash, as well as falling off plaster.
• Putty work. At this stage, seams, cracks are covered, the ceiling is treated with a primer, and then it is equal to a layer of putty.
• Ceiling alignment. The surface is sanded with sandpaper. Then the primer is applied again. Do not forget that the putty must dry properly.
• Applying paint. Painting work is done with a roller. Ceilings in the bathroom are finished with water-based or acrylic paint.
• Re-painting. After the first layer of paint has dried, the second is applied. The direction of movement of the roller should be perpendicular to the previous layer.

Plasterboard ceiling

If you are wondering how to finish the ceiling in the bathroom, look on the Internet for photogypsum plasterboard structures. From this material you can make complex multi-level ceilings. As a result, the design of your bathroom will be unusual and completely unique.

Only moisture resistant drywall sheets will do. They are either hung on a pre-mounted frame made of stainless metal profiles, or fixed with a building gypsum mixture.

The plasterboard ceiling is treated with a primer, and then puttied. After that, the surface is painted. The advantage over conventional painting is that the ceiling can be given any desired shape, as well as fixtures can be mounted in it.

Styrofoam ceiling

Finishing the ceilings in the bathroom with foam boards is another cheap and quick cladding option. Plus, it's the easiest way. The tiles are simply glued to the concrete surface with a waterproof adhesive. The arrangement of the foam ceiling is available even to a person who is absolutely not versed in carrying out repair work.

Most of the plates produced have a size of 50x50 cm. The best decorative effect can be achieved by gluing them at an angle of 45 degrees to the plane of the walls. Among their other advantages, soundproofing properties can be distinguished.

Plastic ceilings

Plastic panels are a very cheap material, perfect for the bathroom. Plastic is waterproof, durable and relatively easy to install. The basis of the ceiling is a frame made of metal rails. PVC panels are attached to it.

Slatted ceilings in the bathroom

Ceilings lined with aluminum slats are considered phenomenally strong and durable. They are not afraid of high humidity, or temperature changes, or flooding from above, or dirt, or accidental mechanical damage.

The shape and design of the surface of the panels can be very different. In addition to straight and smooth, there are curved, engraved, colored slats. Their width can also vary.

How to finish the ceiling in the bathroom with aluminum rails:

1. Corners are attached to the walls. To make the construction even, use the building level (this is such a tool).
2. Hangers are installed on the ceiling. Guide rods are mounted on them.
3. Panels are snapped to the rails. The structure is ready. If necessary, the rails can be easily removed and put back in place.

Options for finishing the ceiling of the bathroom can be completely different, it depends only on the desire and taste preferences. The main thing to consider is that the bathroom has high humidity, therefore, in addition to beauty, the ceiling must have the property not to lose its qualities in these operating conditions.

There are many ways to finish, and it is simply impossible to fit them into one article, we will look at some of them, and we hope that this will greatly facilitate your choice of finish (see).

Coloring

It is still considered one of the most practical and inexpensive ways to finish the ceiling in the bathroom, because it will not be difficult to do the painting yourself. Also great advantages of painting are:

• Cheapness.
• There is practically no need to have a lot of tools on hand.
• With low ceilings, the height of the room is not removed.

How to do

• It is necessary to remove a layer of old paint or whitewash.

• Check the ceiling for integrity, unreliably holding the plaster to remove.

• Repair cracks and joints with gypsum or starting putty, primed and pasted over with a mesh

• Prime with a primer, and in case of strong absorption, apply the primer in two layers, after the first has dried.
• Align the ceiling with putty and sand the surface (see).

Tip: When grinding, you can attach a powerful light bulb to the wall and with its light all the irregularities will be clearly visible.

• Using a roller, apply moisture-resistant water-based paint in three layers. It is necessary to observe the time between painting for the drying of the previous layer.(cm. ).

Drywall

Finishing with drywall helps to level a very curved ceiling (see). It also serves well in the bathroom with a quality installation. It is imperative to take sheets that are moisture resistant, usually they are painted green, and treat the cut points with a moisture-resistant primer.

Fix drywall sheets in two ways:

• Or on a suspended frame made of a metal profile
• Or with the help of a special gypsum mixture such as "Perlfix"

Then they are processed with putty and moisture-resistant paint.

Plastic panels

Finishing the ceiling in the bathroom with plastic panels is the most popular today.. This type of ceiling is absolutely not afraid of moisture, durable and quite easy to install. Also among its advantages, there is ease of care and inexpensive price.

In the bathroom, and in other rooms with high humidity. The panels are mounted on a suspended type frame made of metal profiles. Such a ceiling will last for many years, and will look new. It only needs to be wiped from time to time with a damp cloth.. It is practically sealed and does not allow moisture to pass through (see).

Slatted ceilings

Tip: Slatted ceilings are one of the most resistant materials today, they are not afraid of either high humidity or high temperatures.

Design solutions are a fairly large selection of panels. There are straight, curved, and completely different colors and panel sizes. Also slatted ceilings can be perforated.

But before you make a rack ceiling, it is worth considering that it removes up to about 10 centimeters of room height.

Installation of such a ceiling is quite simple.:

• Corners are fixed along the perimeter to the wall.
• Guide rods are attached to the ceiling
• To the rods, slats are put on latches

Styrofoam ceiling tiles

Tiling is quite simple, and a good option for finishing the ceiling. They are quite durable and are not afraid of moisture.. They are produced mainly in a standard size of 50 by 50 centimeters, and are fixed to the ceiling using ordinary moisture-resistant foam adhesive.

Among the pluses:

• Inexpensive cost.
• Pretty good soundproofing.
• The ability to paint them with moisture-resistant water-based paint.
• Do not require construction skills during installation.

Stretch ceilings are considered one of the most expensive types of ceiling finishes, but this is not entirely true. Films come in different price categories, and you can save on the cost of work by doing it yourself.

The advantages of such a ceiling are many. He is not afraid of moisture at all, moreover, when flooded, the film is able to withstand up to one hundred liters of water per square meter, which drains through the holes for the lamps.

How to do

How to finish the ceiling in the bathroom with a stretch film? - it is not very difficult, but requires some skills and tools.

• A profile for mounting the film is glued around the perimeter of the room.
• Also, it must be additionally reinforced with dowels.
• The film is stretched and inserted with a thin spatula into the mounting profile.
• All waves are removed with a building hair dryer, and smoothed out.
• Cut off excess ends with a sharp knife along the bottom edge of the profile.

Stretch ceiling, looks pretty nice, and does not require special care. It is enough to wipe it from time to time with a special solution. Also suitable is the usual "fairy", or similar means.

Regardless of your choice of how to decorate the ceiling in the bathroom, everything must be done with care. We do not recommend saving on the quality of materials, because repairs are best done once.

When planning a renovation in the bathroom, you certainly have to deal with the choice of materials for finishing all surfaces of this room. Of course, I want them to be not only reliable and have the longest possible service life, but also fully meet the aesthetic needs of homeowners.

Which ceiling in the bathroom to choose is one of the questions that you need to find the right answer. It is important to find a material that is not only beautiful and hygienic, but also has no contraindications for installation in a room with high humidity.

In the modern assortment of building stores, you can find any material that is in demand for finishing work, but you need it to be well suited for a particular bathroom, to match its area, ceiling height, and general design style.

Before moving on to consider the types of ceiling that may be suitable for this room, you need to figure out what requirements they must meet.

Bathroom ceiling evaluation criteria

If you can choose almost any materials for the repair of other rooms, then because of the high humidity in the bathroom, this factor must first be taken into account. So, materials for finishing the ceiling in the bathroom must meet the following requirements:

• The water resistance of the material is mandatory for this room, since humidity and vapor saturation are its natural state. In addition, you should not lose sight of the fact that bathrooms are most often flooded by neighbors from above, since no one is immune from a leaking tap or washing machine.

Leaks in the bathroom - very likely, and the ceiling should be "ready for it"

• Ease of maintenance. High humidity contributes to the formation of condensation on the ceiling, and if you do not periodically treat the surface with detergents, mold may appear there over time. Therefore, the bathroom ceiling should be easy to clean with a soft cloth and a damp sponge and not be afraid of household chemicals.

• - a room in which all family members take water procedures. That is, a priori, all materials for its decoration should be environmentally friendly, absolutely safe, hygienic.

One of the key requirements is an aesthetic appearance that is in harmony with the overall design of the bathroom.

• Aesthetic appearance of the surface. If the bathroom is planned to be renovated using expensive materials, the ceiling must match the overall interior. Therefore, the design must be thought out very carefully.

• Lighting can be attributed to the next criterion, since it is closely related to the ceiling plane. As a rule, there are no windows in the bathrooms, so all hope is only for artificial light sources. If the ceiling is made dark, then more electrical appliances and energy costs will be required to create a comfortable illumination of the room. For these reasons, it is recommended to choose a ceiling of light shades - then it will enhance the brightness of the lamps.

The main types of ceilings and their characteristics

When the selection criteria are clarified, you can move on to information about what types of ceilings can be installed in the bathroom, and which ones are best suited for this room.

So, in the bathroom, the following options are applicable to varying degrees:

• Leveling the surface or finishing with ceramic tiles.
• Creating a false ceiling:

- from aluminum rails - rack;

- from PVC panels;

- from moisture-resistant drywall;

- from plates made of various materials.

• Stretch ceiling installation.

Now it's time to consider what each of the ceilings is, what positive and negative qualities it has and how suitable it is for the conditions of the bathroom.

painted ceiling

This type of ceiling can be called traditional and the most affordable of all existing ones, especially if you have the skills to level surfaces with plaster and putty. If there are none, you can always invite the master to perform this work. Standard bathrooms have a small area, so the work will not cost too much.

One of the most "budget" options - painting the ceiling

Provided that the surface of the ceiling is sufficiently even, then you can do without plastering, bringing it to a smooth state with putty, which is able to close small irregularities.

Putty on your own - it's possible!

If you master the basic techniques of plastering technologies, you can solve a bunch of problems when carrying out repairs on your own. Read how it is carried out - a separate article of our portal is devoted to this.

To do the job efficiently, it must be carried out in accordance with all the rules, using a primer with antiseptic properties and a competent selection of waterproof paint, which can be wet cleaned more than once.

For the bathroom ceiling, water-resistant latex, acrylic, silicate and silicone-based paints are used, which meet all the requirements of this room.

Special moisture-resistant latex paint - surfaces painted with it can be wet cleaned

TO positive aspects This method of finishing can be attributed to the following points:

• Affordable price for materials.
• Ability to work independently.
• Having leveled the surface of the ceiling once, it will be possible to change the color and, if desired, apply the pattern repeatedly.
• Easy to clean painted surface.
• With high-quality work and properly selected materials, as well as regular surface care, a painted ceiling can last up to ten years without updating, unless, of course, emergencies in the form of a flood occur.
• The painted ceiling will suit any interior design of the walls and floor of the room. If desired, it can be applied with paint of the desired shade, in harmony with the finishing material of the walls.
• The ceiling with this finish does not become lower at all, unlike other design methods.

The painted ceiling has its own flaws, many of which are quite fixable:

• The painted ceiling will not retain water at all when flooded from above.
• Over time, spots appear on its surface, or the paint can become very dull, and the white color becomes yellow. However, this problem can be easily solved by refreshing the ceiling on top with a layer of paint of the chosen color.
• A painted ceiling can become exclusive only when applied to it with an original pattern or color gradient - otherwise it will look “just neat”.
• In such a ceiling it will not be possible to mount spotlights. But today on sale you can find no less original lamps that are mounted directly to the ceiling or hung on special brackets.
• If the ceiling treatment technology is not followed, mold spots will definitely appear on the painted surface.

With improper surface treatment, along with dampness, its inevitable companions appear - mold spots.

So, the painted ceiling can be called the best option if there is a need to save money or simply at the time of the repair there is no way to purchase a more modern finish. But, if the surface is maintained in order and updated from time to time, then it can be used for a long time.

PVC panel ceiling

- a relatively new finishing material, and it is most often used specifically for decorating the surfaces of bathrooms or bathrooms. Panels can be mounted in two ways - by fixing them directly to the ceiling with glue, or on a frame crate installed on the ceiling. It can be made from a wooden beam treated with antiseptic impregnations or a galvanized metal profile. The crate is mounted to the ceiling or lowered from it to the desired distance using suspensions.

Most often, the panels are mounted on a grid, since for them to be glued, the ceiling surface must be leveled, which requires a certain time.

If the ceiling in the bathroom is low enough, you can use a bar with a thickness of only 15 ÷ 20 mm for the crate. Then the overall level will drop by only 25 ÷ 30 mm, since the thickness of a plastic lining of 10 mm is sufficient for ceiling cladding.

Plastic panels have many virtues, which determines their wide popularity for finishing bathrooms:

• The installed panels form a moisture-resistant coating, since each of the panels has a groove-thorn lock. In addition, specifically for the accurate installation of the material, fittings are produced that hide the joints of the panels with the walls.

• Installation of this finishing material is quite affordable to do it yourself, even without building skills. It is enough to understand the principle of installing panels and have the necessary simple tools at hand. In addition, the panels are lightweight, so work can be carried out even without an assistant.
• PVC panels differ from other materials in a variety of shades and patterns that can imitate ceramic tiles, wood texture, metal surfaces, etc. Therefore, the finish can be chosen for every taste and color, it is easy to match the overall interior of the bathroom.

• The operation of the coating of plastic lining without loss of decorative qualities can last up to 10 years, depending on the quality of the material. Therefore, you should not choose the cheapest options, as they can become stained, fade or change color.
• By mounting the panels on the crate, you can level the curved surface of the ceiling.
• Plastic lining is easy to clean up by simply wiping it with a dry or damp cloth.
• The panels have an affordable price, so even a family with an average income can afford to buy them.
• Despite the low cost, the finish looks quite respectable on the ceiling.

• Spotlights can be cut into the ceiling surface sheathed with such a clapboard.

Like any finishing material, PVC panels have several shortcomings. And, although they are minor and quite correctable, they should still be borne in mind:

• If it is planned to embed into the panel structure, it will have to be lowered from the main ceiling by at least 80 ÷ 100 mm. - the distance will depend on the height of the lighting fixtures selected for installation. And this, in turn, means that the ceiling will be much lower than expected by the project.

• In the absence of periodic cleaning, dirty streaks and mold can form on the seams between the panels. Therefore, the cleanliness of the structure must be constantly monitored.
• If the panel ceiling is installed poorly, and at least a small gap forms at the joints with the wall or between the elements, a favorable environment will be created between the suspended and capital plane for the occurrence of mold, which will not be visible from the bathroom side. It is possible to remove such foci of microflora only by dismantling the panels and putting a lot of effort. Therefore, it is recommended to fill all the resulting gaps with sealant.
• The panel ceiling will not be able to stop the flow of water from above in the event of leaks, so in this case it will have to be dismantled in order to dry the capital surface. You may need to redecorate the whole room.

From the foregoing, we can conclude: a ceiling sheathed with plastic clapboard is a good, affordable option that can make the ceiling neat and aesthetic. It, with proper care, will last a fairly long time, if during its operation there are no emergencies.

Slatted suspended ceiling

The rack version of the ceiling has the same design as the panel one, but it consists of narrow rails made of aluminum, plastic or thin steel. The metal used for the manufacture of rails has a special treatment and does not rust. The details of this ceiling are mounted on the crate in the same way as the plastic lining, but the ceiling decorated by them has a more respectable look. Reiki are produced in a variety of colors and can be decorated with patterns or have a metallized coating - gilding or chrome plating.

Virtues this material can be considered as follows:

• Installation of a rack ceiling can be carried out independently, without involving a master in the process. And this means cost savings, which is comparable to the amount paid for the material itself.
• Reiki have a sufficiently high flexibility, which allows you to assemble curvilinear original designs from them.

• Qualitatively installed ceiling elements in a single plane make it waterproof and do not let steam from the room to the main ceiling.
• It is easy to care for such a ceiling - it is enough to regularly wipe it with a damp soft cloth and periodically treat it with antiseptic detergents to prevent mold.
• Such a design can be operated, with proper care, from 10 to 12 years.
• The material has a higher price compared to PVC lining, but it is quite affordable and corresponding to its quality. The cost may vary depending on the material of manufacture of the rails.

Such a ceiling has flaws, which, in fact, are identical to the negative qualities of plastic structures.

The only thing to note is that the slatted ceiling is not suitable for every interior design of the bathroom, therefore, before purchasing it, it is recommended to draw up a sketch of the design of the room in color.

foam boards

The simplest and most affordable and affordable material for installation can be called thin embossed foam boards. Their installation is carried out on any relatively flat surface using one of the polymer adhesives. The ceiling, decorated with such plates, looks quite neat and is not inferior in aesthetics to the painted options.

One of the simplest and most inexpensive options is foam tiles glued to the ceiling surface.

TO positive properties this material, pasted on the ceiling of the bathroom, can be attributed to:

• Sufficiently high moisture resistance of the material.
• Aesthetic and neat appearance of the surface.
• The lightness of the panels and, accordingly, the ease of installation make it possible to carry out the design of the ceiling on their own, even in the absence of experience in this type of work.

• The capital ceiling, decorated with foam tiles, will practically not lose in height, since the tile is glued directly to it and has a thickness of only 3 ÷ 5 mm.
• The service life of such a ceiling is small - only 4 ÷ 5 years, this period is consistent with the low price of the material.
• If the tile has a flat surface, then dust and dirt can be easily removed from it.

Negative sides The following factors are considered in this design:

• In order for the tile to serve for a longer period without the appearance of mold under it and in the seams, it is recommended to treat the surface with deep penetration antiseptic impregnations before gluing it, which will lead to additional costs.
• Spotlights cannot be built into the foam ceiling.
• This material will not retain water when leaking from the upper floor, and in such a situation, the finish will have to be completely replaced.
• Since the ceiling in the bathroom requires frequent cleaning and processing, it is not recommended to choose plates with a deep relief pattern for this room, because it will be quite difficult to clean it from dirty deposits.

This method of finishing can be called an economy option, applicable if it is not possible to purchase and install more expensive material. Such tiles, however, are more suitable for rooms with normal humidity.

Plasterboard ceiling

The ceiling can be decorated with drywall in two ways - by gluing it onto the main base and additionally fixing it to it using “fungus” dowels, or by fixing the material to a wooden or metal frame. But both in the first and in the second case, drywall will require additional decorative coating.

To cover the ceiling in the bathroom, sheets of moisture-resistant drywall are used, which has a higher price than ordinary material, as it has the necessary qualities for installation in a room with high humidity. This type has a green surface color and GKLV marking.

Advantages plasterboard ceiling:

• GKLV material is highly resistant to moisture and mold.
• From drywall, you can make multi-level exclusive designs.
• It is suitable for installing spotlights and hiding various communications - electrical cables and ventilation ducts.
• - an excellent material for leveling ceiling planes, which is why it is often called "dry plaster".
• Sheets can be used as a basis for any decorative coatings, so a smooth and durable surface is created.
• The service life of such a structure is unlimited, unless emergency situations occur, and subject to regular updating of the finishing layer.

disadvantages plasterboard construction are considered the following points:

• For the manufacture of such a finish, you will have to invite a qualified craftsman, since the installation process is quite complicated, especially if you plan to install a multi-level version of the ceiling. In addition, it is not easy to finish the finished surface, as it requires treatment with primer solutions and high-quality coating with putty compounds.
• If you take into account all the materials necessary for such a ceiling, the process will be quite costly.
• Installation of the entire structure, from start to finish, will take a lot of time, especially in cases where the installation is done independently, and experience in this process has not yet been gained.
• The plasterboard ceiling will not be able to retain water in the event of serious leaks on the upper floors, and in such a situation, the sheets of material will have to be replaced.
• The ease of cleaning a plasterboard ceiling will depend on the quality and properties of its exterior finish.

So, neat ceilings of various designs are obtained from drywall, which can solve some everyday problems - leveling surfaces, hiding communications, and even insulating or soundproofing the ceiling. But, it is better to mount them in rooms where there is a minimal risk of flooding, otherwise money, effort and time can be wasted.

Tiled honeycomb suspended ceiling

In construction stores, you can find ready-made systems from special metal profiles that are assembled and suspended from the capital base using hangers. The slabs placed in the created cells of such systems are made from different materials - they are gypsum fiber, glass, mirror, gypsum board, plastic and others.

Such a ceiling has its pros and cons, which you must be aware of when deciding to install such a suspended structure.

To their virtues may include the following:

• By installing such a false ceiling, it is possible to level the capital surface, which has irregularities of any degree, since the hooks on which it is suspended allow you to adjust the height of all sections of the structure ideally in a vertical plane.
• The ceiling allows you to hide various communication elements behind its surface.
• The structure can be used for installation between it and the main surface of insulating or soundproof materials.
• Spotlights, recessed lighting devices or overhead lighting can be embedded in the plates - when choosing frosted plexiglass plates.
• Ceiling elements have a variety of designs, so they can be matched to any room interior.
• The panels are not fixed to the surface of the frame and are removable, so if desired, all or some of them can be removed and, for example, repainted in a different color. In addition, in case of leaks from above, the panels can be temporarily dismantled to dry the ceiling, and if necessary, replaced with new ones using the same metal frame.
• Suspended design gives the ceiling an aesthetic and neat look.

• The service life of the structure is about 10÷12 years.
• Installation of a slab ceiling is simple, so it is quite affordable to do it yourself.
• The complexity of cleaning the surface directly depends on the material of manufacture of the plates.

From shortcomings slab frame ceiling for mounting it in the bathroom, we note:

• Such a suspended ceiling will not protect the rest of the decoration in the bathroom from water flows during leaks - it performs exclusively decorative functions.
• Mold will definitely appear in the space between the slabs and the main plane of the ceiling, unless additional ventilation is installed in this space.

These are the main disadvantages, knowing about which you can decide whether such a ceiling can be installed in a particular room.

Conclusion: such a ceiling can be installed in the bathroom, but it is not ideal for it. Therefore, choosing it, you need to take into account the above points.

Mirror ceiling

Separately, it is necessary to highlight the mirror ceiling, although it is also mounted according to the principle of a suspended structure. Having decided to install such an option in your bathroom, you need to be prepared for high costs.

A reinforced metal frame is fixed under the mirror panels, and the elements themselves are fixed on it with glue or special fasteners, for which holes are drilled.

It should be noted that there are more affordable options for mirrored ceilings - these are plastic panels with an imitation of a mirror coating, they are much easier to install than real plates and much easier to install. Such panels are laid on a lightweight metal frame, described above, but the service life of this option is lower than that of a real mirrored ceiling.

Positive traits mirror design:

Durability with proper installation and care.

• An opportunity to save on electricity, as mirrors will double the power of lighting.
• Exclusive, "rich" design appearance.
• Moisture resistance of the plane, due to the fact that the panels are fixed on the frame crate.

"Minuses" mirrored ceilings:

• Inability to retain water during leaks.
• Complicated surface care. In order for the ceiling to have an impeccable appearance, it must be polished and rubbed to perfect cleanliness, as even minor dirt will be visible on it.
• Installation of this design is recommended to be entrusted to a master with relevant experience.

Before installing such a ceiling, you need to think about how it will affect the psyche of each of the household members, since not everyone is able to withstand such an abundance of mirrors and shine from them.

Stretch ceiling

Probably, it can be called the most ideal option for a bathroom, as it has more positive qualities than negative ones. The most significant practical advantage of a stretch ceiling is its double-sided moisture resistance. It is made of polymeric elastic materials, capable of shrinking when heated by warm air, stretching into a smooth canvas.

Stretch ceiling - both beautiful and practical

TO benefits stretch ceilings for the bathroom before other decorative finishes can be safely attributed to:

• Waterproof material. In case of an emergency in the form of leaks from the upper floors, the stretch ceiling is able to easily collect water on its inner surface. Thus, the decoration of walls and floors, as well as bathroom accessories, will not be damaged. The polymer material can support a weight of 100 kg per square meter.

If a similar situation arises, then you just need to contact the company that installed the ceiling and call the wizard. He will drain the accumulated water and again stretch the stretched material, which has not lost its original qualities from such a “stress”.

• Caring for a stretch ceiling is very simple - you can simply wipe it with a damp cloth, removing the dirt that has appeared on the surface.
• With the help of a stretch ceiling, you can hide all the flaws of the capital base without resorting to leveling it with plaster.
• The material can be stretched at a distance of only 50 mm from the interfloor ceiling, so it will not “steal” the usable space of the room
• The design of the stretch ceiling can be chosen for every taste, for any bathroom interior or - design proposals are striking in variety.
• By itself, the stretch ceiling is also a fairly effective barrier against the spread of noise.

Soundproofing problems can be solved with a stretch ceiling!

Moreover, the canvas itself dampens sound waves. The space between it and the ceiling allows you to additionally arrange. How and with what it can be done - in a separate publication of our portal.

If you decide to choose a stretch ceiling for the bathroom, then you need to know about it. shortcomings:

• It is impossible to install a stretch ceiling on your own, since this process requires special equipment and auxiliary materials, as well as high skills in such technology.
• The ceiling is not resistant to mechanical stress, and its surface is easily damaged by hard or sharp objects. If such an incident occurs, the ceiling will lose its unique qualities of retaining water.
• A white stretch ceiling may turn yellow over time in areas around the installed ones. It will not work to wash or paint over this flaw, so the canvas will have to be changed completely.

Prices for popular types of bathroom ceilings

Bathroom ceiling

Summarize!

Let's summarize the choice of the type of ceiling for the bathroom according to two main criteria: practical qualities and aesthetic design.

• The first place of reliability and safety of the premises from flooding is occupied by stretch ceilings.

- The second place can be safely given to plastic panels and suspended ceilings:

- Painted ceilings claim the third place, as they are easily restored - the color and pattern on them can be replaced without much difficulty. When wet, the painted surface is always easier to dry than those covered with non-removable panels.

• From an aesthetic point of view, three types of ceilings deserve the first place - these are stretch, slatted, and PVC panel ceilings.

- The second place can be given to the slab version, which also has a variety of design, but, unfortunately, is not suitable for all bathrooms.

- The third place in terms of aesthetics is occupied by a plasterboard ceiling, since it is possible to create exclusive complex structures. But from a practical point of view, it is more suitable for dry rooms.

Of course, the aesthetics of one or another version of the ceiling must be determined by the owner of the home himself, but it must be remembered that the practical side of the finish is always evaluated first.

And, at the end of the publication, the reader is invited to a video with tips on choosing a ceiling for the bathroom.

Video: which ceiling is more suitable for the bathroom?

Before deciding how to finish the ceiling in the bathroom, it is recommended to exclude those types of material that are generally not suitable for a wet room. After that, you can safely study the installation technology, the technical characteristics of the remaining types of materials and decide how to finish the ceiling in the bathroom.
Consider what should be excluded when choosing a material.

Before excluding certain types of materials, it is necessary to determine the requirements for them for a wet room. The bath is also subject to temperature changes and an increased risk of flooding.
In addition, the material must be easy to maintain during the operating period.

Invalid bathroom materials

There are some materials that should not be finished in rooms with high humidity.
So:

• Immediately it is necessary to exclude whitewashing with lime, apart from all the inconveniences with this type of material, against the background of modern means, it looks rather boring.
• Whitewashing with chalk. In addition to all the shortcomings that are characteristic of ordinary whitewash, chalk on the ceiling serves as an excellent breeding ground for mold.
• Oil paint or enamel finish. As for the bathroom, in this room the coating very quickly loses its attractiveness.
  After a short period of time, the ceiling turns yellow, cracks, crumbles.
• Wallpaper finish will last a maximum of 3 months.

• Ordinary drywall, chipboard, fiberboard. All these materials absorb moisture and deform over time.
  And the slightest leak will completely destroy the repair, and capital entails high costs.

Finishing the ceiling in the bathroom: modern finishing materials

Thanks to modern building materials, finishing the ceiling in the bathroom for many years is not difficult.

As in any other room, the ceiling in the bathroom can be finished in completely different ways. There are ways that are expensive and spectacular, practical, traditional, original - it all depends on the financial capabilities and taste of the homeowners. But when choosing an option, you must also take into account the specifics of the room, otherwise the finish will very soon lose its decorative effect. Let us consider in more detail which ceiling is better to make in the bathroom so that it is attractive, reliable and does not cause trouble with cleaning.

The bathroom is characterized, first of all, by high humidity, which affects the durability, strength and aesthetic appearance of the finish. Dampness and heat contribute to the development of mold on the ceiling and walls, corrosion of metal elements, the formation of smudges and stains on the coating.

That is why the ceiling in the bathroom must meet several important requirements:

• be resistant to moisture, easy to clean and wash;
• do not emit harmful fumes;
• have a neat appearance and match the style of the bathroom interior;
• there should be easy access to hidden structural elements.

Finishing materials, in addition to water resistance, must be resistant to fungi and corrosion, and be durable enough so that the ceiling does not have to be repaired every year.

Ceiling "Starry sky" with blue lighting and gold accents

Bathroom ceiling options

The most budgetary finishing methods include plastering, whitewashing and painting the ceiling surface. The most expensive are glass panels with photo printing and stained glass windows, mirrored ceilings. There are many options in the middle price segment: plastic sheathing, slatted ceilings, figured structures made of waterproof drywall. To figure out which one is the most optimal, it is worth studying the pros and cons of each type.

Plastering and whitewashing

Now in any hardware store you can easily find waterproof plasters and putties, and at a very reasonable price. With their help, it is easy to eliminate small irregularities, small cracks, other defects, to give the ceiling a very neat look. It is not difficult to master the application process, and many homeowners prefer to do it themselves, which saves on the services of a master.

It is very important to prepare the surface well, clean everything that is loose, close up the joints between the floor slabs and deep cracks. The plaster itself is applied in several layers, each of which is carefully rubbed and primed. For whitewashing, chalk or slaked lime is used, diluted in water to the desired consistency.

• materials are cheap and environmentally friendly;
• work can be done on your own;
• if necessary, it is easy to eliminate defects in a separate area;
• lime has antiseptic properties, so mold will not appear on the ceiling.

• too simple look;
• preparation and leveling of the base requires a lot of physical effort;
• whitewash from wet fumes peels off and turns yellow over time, so you need to renew the coating annually;
• if splashes get on the ceiling, after drying, ugly streaks will remain.

Waterproof plaster

Coloring

As in the case of whitewash, the surface of the ceiling requires perfect alignment, especially if the paint is with a glossy sheen. The choice of paints for bathrooms is simply huge, almost all of them are environmentally friendly, resistant to moisture and abrasion, and have a wide color palette. Most compositions have vapor barrier and anti-fungal properties, which is of great importance for rooms such as a bathroom. It is not at all necessary to make the ceiling monophonic: paints can be combined in color, draw ornaments and patterns, use various stencils.

• decorative, the ability to show imagination;
• ease of application;
• affordable cost of materials;
• paint is much more durable than whitewash;
• work can be done independently;
• the ceiling can be washed.

• the surface must be perfectly level;
• over time, the color fades, white paint turns yellow, spots may appear on the coating;
• in case of flooding from above by neighbors, the finish will be hopelessly damaged.

Moisture resistant wallpaper

This type of finish is quite rare due to its impracticality. For wallpapering, the ceiling is prepared as carefully as for painting, since any irregularities clearly appear under a thin coating. Waterproof vinyl wallpaper can be repainted several times to update the bathroom interior.

• finishing will be relatively inexpensive;
• wallpaper gives the ceiling an attractive and cozy look.

• it is very difficult to glue wallpaper on the ceiling on your own, you need an assistant;
• cutting, fastening and docking of canvases require great accuracy;
• mold often develops under the wallpaper;
• when flooded by neighbors from above, the coating will have to be completely changed.

waterproof wallpaper

plastic ceiling

Sheathing with plastic panels is a very popular type of finish for bathrooms. The panels are attached to an aluminum frame mounted on the ceiling. The frame hides all the defects of the ceiling surface, allows you to mount built-in lighting, hide communications. The panels differ in size, thickness, colors and texture, so you can choose an option for almost any style of interior.

Profile for fastening panels is fixed with a hanger

• the ceiling looks very aesthetically pleasing and attractive;
• the cost of materials is not too high;
• no need to level the surface;
• installation does not require special skills and is within the power of anyone who knows how to handle the tool;
• the design is durable, if necessary, individual panels can be replaced with spare ones;
• the coating is absolutely not afraid of moisture, does not deform, and is easy to clean with detergents.

• the ceiling becomes several centimeters lower;
• dirt can accumulate at the joints, and in the absence of proper ventilation, a fungus develops there.

This option has a very stylish modern look. The design is a metal frame sheathed with narrow strips of plastic, aluminum or thin steel with an anti-corrosion coating. The color range of such coatings is very wide, slats for gold, chrome, with a pattern are in special demand. Installation can be open and closed: in the first case, gaps of a certain width are left between the rails, in the second, all elements are fastened end-to-end. The assembly is very simple, anyone can master it.

• spectacular appearance, a wide variety of colors;
• simple installation;
• no need to level the base;
• it is possible to install built-in lighting;
• the material is resistant to moisture, corrosion, temperature extremes, fungi;
• ease of care;
• if necessary, it is easy to replace individual elements;
• in case of flooding from above, there will be no harm to the coating;
• The average service life is 30-35 years.

• rack ceiling will cost a little more than a regular plastic one;
• Dirt can accumulate on seams and joints.

Among suspended structures, a cassette or modular ceiling is in high demand. It is a suspended metal frame, in the cells of which decorative panels are placed. For the bathroom, panels made of aluminum, plexiglass, galvanized steel, acrylic, mineral are used. They differ in color and texture, can be plain and with a pattern.

• no need to level the surface of the ceiling;
• the frame perfectly hides communications, there are opportunities for built-in lighting;
• if a separate panel is damaged, it is easy to replace it;
• access to communications remains - just lift one of the modules;
• panels give the ceiling a modern and very attractive look.

• high price;
• the hanging system takes up at least 15 cm of space, so it is not suitable for bathrooms with low ceilings.

Ceiling tiles

Finishing with polystyrene foam tiles is also quite popular. The tile gives a cozy and aesthetically appealing look, suitable for most interior styles. To glue the tiles, the ceiling should be well prepared, leveled, puttied, be sure to cover with a primer. Expanded polystyrene is resistant to moisture and mold, it can be periodically repainted.

• low cost;
• light weight of the material;
• variety of textures;
• tiles are easy to process during installation;
• ease of care.

Cons: you need to carefully prepare the surface;

• cutting and joining tiles require accuracy and precision;
• the material breaks easily, so when gluing it is impossible to press hard on the tile;
• dirt can accumulate in the joints;
• when flooded from above, the coating may peel off and have to be replaced.

Drywall

Plasterboard constructions are quite common in large bathrooms. They are metal frames, most often multi-level, shaped, with built-in lighting, sheathed with sheets of moisture-resistant drywall. From above, the casing is puttied and painted with waterproof paint. Such multi-level ceilings look very original and stylish; the material is easy to process, installation does not require special skills.

• the frame perfectly hides all defects, wiring, pipes, there is no need for careful preparation of the base;
• sheathing perfectly tolerates the effects of steam and temperature changes, can be washed, resists the development of fungi;
• the ceiling looks attractive and solid.

• no access to communications;
• the frame takes a few centimeters of space;
• the arrangement of the ceiling is quite expensive;
• in case of repair, it is problematic to replace a separate section;
• periodically the ceiling needs to be painted to refresh the appearance.

Stretch ceiling

The popularity of stretch PVC ceilings is only growing every year. They are combined with any style of design, they are distinguished by a wide variety of colors and textures. Ceilings with photo printing and 3D images look especially impressive.

• high decorative effect;
• resistance to moisture, temperature changes, condensation does not accumulate on the ceiling;
• when flooded, the coating retains a large volume of water, after draining which again takes on its previous shape.

• installation requires special equipment and professional skills, so making a stretch ceiling on your own will not work;
• such a finish is quite expensive compared to rack and cassette ceilings;
• the film is easily damaged by a sharp object;
• no access to communications;
• in case of damage, the coating must be completely changed, it cannot be repaired.

Glass ceiling

Such a finish is an expensive pleasure, but unusually spectacular. Plates of tempered glass can be matte, mirrored, colored, with drawings and stained glass windows, with built-in lighting. Installation is carried out according to the type of cassette ceilings, but the frame is reinforced, since the weight of the glass is quite large. Of course, the base must also be especially strong, otherwise the whole structure may one day collapse down.

• the ceiling looks unusually impressive and original, visually expands the room;
• glass is not afraid of moisture or fungus, it can be washed with any detergent;
• with careful care, the coating will last for more than a dozen years.

• high cost of materials and installation;
• installation requires accurate calculations of the load on the base and significant labor costs, so a specialist should deal with it;
• not suitable for rooms with weak ceilings;
• stains easily remain on the glass surface, so you need to take care of it more carefully.

Which ceiling to choose

Each of the described options is attractive in its own way, but given the optimal ratio of cost, decorativeness and ease of installation, the best option is a plastic or slatted ceiling. Thanks to a wide selection of panels, you can find an interesting and unusual combination of color and texture, or, conversely, choose a discreet classic version. If the bathroom is decorated in a high-tech or loft style, mirrored panels, as well as chrome and metallic colors, are ideal. This is a great opportunity to show your imagination, to feel like a designer.

Installing a slatted ceiling in a bathroom

Installing a slatted ceiling is the final step in finishing a bathroom. Previously, the draft ceiling must be cleaned of dust, peeling plaster, paint, all existing cracks must be embroidered and sealed with putty. The places affected by the fungus must be cleaned and treated with antiseptic agents. Finally, the surface is covered with a waterproof primer with antifungal additives to prevent the appearance of mold in the future.

Advice. Before installation, wiring for lighting fixtures should be done and the wires should be fixed to the ceiling with dowel nails and plastic clamps.

In the process of work you will need:

• decorative slats made of plastic or aluminum;
• aluminum profiles;
• stringers (carrier tires);
• suspensions;
• self-tapping screws and dowels;
• metal scissors;
• level; drill with a set of drills.

Step 1. A straight horizontal line is drawn along the perimeter of the room on the walls at a distance of 15 cm from the rough base. It is very convenient to use a laser level for marking, but for lack of it, a regular building one will do.

Step 2 On the marking line, every 40-50 cm, points for holes for fasteners are marked, and the same marks are placed on the profile. Drill holes in the guides, then in the walls, using the appropriate drill. The hole diameter should be 6 mm.

Step 4 Between two opposite walls, load-bearing tires - stringers are installed. There should be a gap of about 10 mm between the ends of the stringers and the profile wall to compensate for thermal expansion. In this case, the elements are located strictly perpendicular to each other.

Advice. To connect two stringers to each other, it is necessary to put one on top of the other, align the perforated holes and fix it on both sides with self-tapping screws.

Step 5. On the ceiling, mark the location of fasteners for stringers at a distance of 20 cm from the walls and about 0.7-1 m between them. Holes are drilled, dowels are inserted and stringers are screwed on. Self-tapping screws are not completely screwed in, leaving the possibility to adjust the height of the rails during installation.

Step 6 They fix the first rail: apply it to the starting profile, insert it into the grooves of the stringers and press until it clicks. There should be 5 mm gaps between the ends of the rail and the profile wall.

The rail snaps into the stringer and the opposite profile on the wall

Installation of plastic rails

Step 7 In the same way, all other rails are attached to the location of the lamp. To make a hole for it, mark the center of the cutout on the panel with a pencil and drill it with a crown of the desired diameter. Next, insert the housing of the lighting device into the hole, holding it, attach the panel to the stringers, insert the wire inside and connect the light bulb.

Step 8 In the same way, they mount all the other lamps, check their work, complete the installation of entire rails. If the last bar is wider than necessary, it is cut to width with metal scissors. The material is quite thin, so it is not difficult to cut it.

Advice. For convenience, you need to draw a cut line on the rail, then make perpendicular cuts on the same side at a distance of 4-5 cm from each other and slightly bend the material. After that, cutting off the excess is much easier and faster.

Step 9 Having fixed the last bar, check the horizontalness of the coating and, if necessary, tighten the screws in the stringers. Holes between the rails make this easy to do.

First, the last rail sawn along is installed, after it - the penultimate one-piece

Step 10 Now it remains to close the gaps with special inserts, if they are provided for by the design. They are cut to the required length, inserted between the slats, pressed tightly until it clicks.

The finished coating should not have gaps and cracks between the elements, all rails should be in the same plane. If the ceiling is wavy, it means you haven't tightened the stringer mounts enough. To fix the problem, you need to carefully pry off the inserts in problem areas, tighten the screws and return the inserts to their place.

Video - Which ceiling is better to do in the bathroom

Video - Installation of a rack ceiling