Clamp or plastic screed is a very useful thing with which it is possible, for example, to clean up the computer table, having gathered all the wires into a bunch. Of course, now the cat from the reading an article will say that the screed in the store is worth a penny - and it will be right. I want to notice that it can not always be at hand, there may be other reasons. Below is the instruction how to make a reusable clamp from a conventional plastic bottle.
Such a clamp has one obvious plus that does not accurately possess exactly - this is a reusability. It can be easily removed without any problems, and pull the same time and fix it.

Need

• Plastic bottle.
• Scissors
• Knife stationery
• Rule
• Hole puncher.

We make clamps - screeds of plastic bottles with their own hands

We take a plastic bottle and cut off her bottom. Next, cut into small stripes.

Next, these strips are cut on smooth ring, a width of about 10-12 mm.

Here's drawing of the end of the clamp, which will serve as a lock and fix everything in a dense ring.

At the end, there are three holes, or 6 - connected to each other.

This is an option for a wide belt.

Now, with the help of a stationery knife and a line, we cut the sidewalls so that the tongue goes well into the holes.

Cut scissors.

It turned out here such a clash.

Now the application scheme:

Everything is simple: the first three holes Tail screed comes in a row. But the last crossroad - the bend is made only after the screed captured the desired object.

It is not necessary not to postpone such a tie - the force of grasp she is rather significant.

You can make a narrow screed to pass through a single hole hole.

Clamping technology.

Hands to break or disconnect very and very difficult.

Visual experiment. The clamp perfectly holds a brush expendillary with rigidity of 25 kg!

And now the screed is directly in your work, perfectly performs my duties. A free end can be fed into the beam.

Make 3-4 pieces is not so difficult, as it may seem at first glance. This will be quite enough that complete all interfering and protruding wires at your table.

Plastic clamps are strips, which are made of durable and at the same time flexible material - polyamide, or nylon. Plastic clamp is considered a universal subject for a screed. Previously, they were used only in order to connect cables and wires into the bundles, now the range of using plastic clamps has expanded significantly. They can be used in the following cases:

1. In order to seal various compounds.
2. In order to pack production, including food.
3. For fastening light designs.
4. In order to lay the wires, cables, as well as their attachments to various designs.
5. To create a rigid, but at the same time moving fastening of pipelines with a small diameter.

The use of plastic clamps allows to facilitate the installation process, minimize the time spent, as well as to work efficiently. In addition, they can be used to create original things. For example, with the help of plastic clamps, you can easily soar a basket, such a device is perfect as a gift. Another popular way of use is the creation of multi-level hangers. Plastic clamps are able to withstand several hangers on themselves, so such an idea will significantly save space in the closet and clean up.

Plastic clamps are perfectly suitable for storing small things. For example, they are easily placed a bundle of keys, as well as with their help you can store various wires, so they will always be in proper form, and will not be subsided.

Stopper for drills is another practical way to use plastic clamps, which will have to do with each wizard. Its manufacture does not require financial costs. It makes it easy to control the depth of drilling. It also does not leave tracks on the material at all, is suitable for reusable applications and easily removed. Also, plastic clamp can be used as a key holder from a drill cartridge. This will not lose the key, thanks to two clamps that fasten it to the cord of a drill.

Plastic clamps were widely used, since, manifesting fantasy, they can be used different ways. They not only allow to ease life, but also can also act as a material to create different crafts.

Plastic ties have long and firmly entered our lives. But, despite this, many still use them for direct purpose - to connect to a beam of a set of chatting. However, there are a number of ways for their non-standard applications, which will be described in today's article. For some, they will seem banal and well-known, but for some of our readers this review will be a real discovery. In addition, looking at the variety of colors of plastic screeds offered on Russian counters, it is possible to beat some products so that any designer envies.

Read in the article

The most simple methods of applying a plastic screed

To begin today I would like the most elementary ways, gradually approaching those that many people can hit by their unusualness. For example, plastic ties can be used for garter to peeling of seedlings tomato or raspberry in the country. For this not even a developed fantasy. It will be able to encourage bushes each, and therefore it is not necessary to stop in detail on how it is not worth it.

Key ring

Often, spare keys lie in some tank without a ring, and some are completely scattered throughout the house. In this case, the plastic screed is indispensable. Especially if together with the spare keys from one castle are also from others. Different plastic colors will help you quickly find the desired bundle. But those who use everyday, such a way should be used with caution - the screed has a bad "habit" to break at the most inopportune moment.

Castle on the suitcase

On modern suitcases, there is a pretty necessary function - the dogs can be copped with a small lock to protect the content from not quite clean on the hand of people. This perfectly saves on travel by train, where in the time the train station is easy not to keep track of the luggage. The problem is that the keys from these locks are very small and often lost. Here and the plastic screed will help. It can be used instead of a lock. Of course, the defense will not be so reliable, but hardly thieves always holds a tool with him that can eat plastic, and it is not possible to cut it with a knife.

This also includes the option of repairing a dog, from which the tongue flew off, which happens quite often. It is enough to turn the screed into the hole and tighten, then cut off the resulting tail on the desired length.

Stitching of logs and newspapers or folder for papers

Sometimes it is necessary to sew papers into one stack so that they do not roll around the entire table. There is no problem when the folder is at hand. And if not? Then plastic ties will come to the rescue. With their help, you can easily sew a different number of documents, having done the holes in them with holes or laying the sheets into plastic folders, which already have devices for the connection. The second option, of course, is preferable. Corks are made from ordinary cardboard cut in size.

Repair of the broken rings of the shutter in the bathroom

The problem of damage words, which hangs, is known to many. It will be helped to solve it all the same plastic screed, which has been done through the hole in the curtain and is delayed on the rings the required length around the rod. Here everything is also quite simple.

Solving the problem of posting a smartphone when charging and in other cases

Charging the smartphone is a sick question, especially if the cord is very short. In this case, you need to make 2 loops. The size should allow them to freely wear them on the smartphone. After that, they are connected to each other one more tie. Now you can boot them to the gadget. The charger power supply is inserted into through the connecting ring. Now the smartphone hangs on the charger and does not interfere with anyone, the wire is located freely, there are no stretch.

Another option is to use screeds as a stand for a gadget to view video files. 2 rings are located so that their locks are located one edge of the smartphone. Then, the openers of the gadget to sticking tails, you can free your hands.

Cord for benzokosy

A device that helps ride a bike in winter

If you tighten the plastic ties around the wheel at a distance of 5 cm one from the other, then there is the opportunity to ride in the winter, not afraid of falling. Screeds will improve the clutch with the surface. Of course, on the flooded rink, they will not help, but on the usual winter Road Healthy will be helped.

Gift Girl: Interesting "Hand Made"

If you attach a little creative and give the will of fantasy, you can not think that you can buy a girl on March 8 or February 14. The child will not remain aside too. Plastic ties will help to make a toy and him. It is only necessary to give will imagination. And what will happen from this, decide the master. Sometimes they can even get things that look more interesting than thought. This can be seen when looking at the photo below.

Blyha belt

When the banner breaks on the beloved belt breaks, it is comparable to a disaster for many. Temporarily rescue in such a situation the same plastic screed. If you turn it into a tongue ring and tighten up to the required size, the problem of the arrangement will be solved.

Viking Beer Mug

Today, this is the last and most, according to the editorial office of Housechief, an interesting subject that can be done with the help of plastic screeds. Beer mug from banks and clamps can make each. It will look pretty unusual. For this you need with usual tin cans Cut up the top cover. The edges at the same time it is better to adjust so as not to cut down. After that, the carbine is taken - its sizes are selected depending on the hand. It remains only to pull him to the bank in 2-3 places and the Mug of Vikings is ready.

Finally

In fact, the methods of applying plastic screeds listed today are only a small part of what can be done. After all, it all depends on the fantasy and the presence of hands growing from the right place. But do not forget for what, first of all, we need plastic ties. Homemade Master It will be very unpleasant when the actual necessity appears in the clamps, and they will not be at hand due to the manufacture of different crafts.

We hope that today's article was interesting and useful to our reader. If you have any questions on the topic, they can be set in the comments below. Editorial HouseChief will try to answer them as soon as possible. Perhaps someone has more interesting ways of using plastic screeds. In this case, please write about them in the comments below. This information can be useful to other readers. And finally, we bring to your attention a short video. Perhaps you will learn something new on today's topic.

October 11, 2018
Specialization: Master in the construction of plasterboard structures, finishing works and styling outdoor coatings. Installation of door and window blocks, finishing of facades, installation of electricians, plumbing and heating - for all types of work I can give detailed consultation.

Cable ties saw and know everything, but not everyone guess how you can use them in everyday life. I will tell about several interesting methods Applications of plastic screeds and show visual examples.

Method 1. For decorative caps

Such caps are attached to the rod of the wheel with a spring clamp that allows you to quickly remove and wear them. That's just there is a risk that the caps can simply fall off. To avoid this one can fix them with cable ties in several places.

Method 2. Luggage hacking warning

Want to quickly determine if your baggage opened at the airport or at the station? Just pull the runners among themselves with a regular screed. It is better to use bright colors.

In everyday life, white or black ties are used. Therefore, even if such methods are known to the criminal, it is unlikely to be a tape suitable color. And most likely he simply refuses the idea of \u200b\u200bopening a suitcase.

Method 3. Wiring marking

Colored ties will come to the rescue and when you need to quickly turn off the electrical device from the network and understand which cable belongs to it. In order not to be confused in wires, cables and forks, do as follows.

On each wire, you turn on 2 screeds of the same color. First fix directly close to the electrical appliance itself, and place the second place at the plug.

Method 4. Fixing tools

Round tools and details (whether it is screwdriver, drill, etc.) So strive to roll from the table or workbench, it is only a little slightly to hurt them. To solve the problem, put the screed on each of the tools, and cut free finish.

Thus, the details will always be there exactly where you put them. And if you wish, you can choose the screeds of the same colors for specific types of tools - so it will be easier for you to find the necessary one.

Method 5. Marking of depth of drilling

Another practical application of a screed - they can become a kind of level when drilling. Fix it at the desired distance from the edge of the drill, and the screed can specify when it is necessary to stop drilling.

Method 6. Spikes for a bike

If you often have to ride a bike in bad roads or in winter, then it's time to get a set of screeds. They will enhance the grip of the wheels with the road surface and make driving more comfortable.

Tip! It is better to put a latch on the left or right of the tire, but in no case on the front side of the wheel. Screed can easily hand over or sell rubber.

Method 7. Shoes in ice

Connect several screeds with each other, as shown in the photo, and tighten them with winter shoes. It employs the same principle that with bicycle wheels - ties are improving the grip on slippery coating.

Method 8. Lamp Decor

Cable ties are good not only from a practical point of view, but also with decorative. With their help, you can create even decorative lampshade. And here you are limited only to your fantasy.

Method 9. Running outlets

After many years of operation, the attachment in sockets can break, after which they begin to fall out of the niche in the wall. And a plastic screed will come to the rescue! Its clasp and the edge of the tape can be an additional fastening.

The scheme of action is simple: Wrap the screed around the screw, tighten the mount, and do more superfluous.

Method 10. Plant support

Screeds can be useful and in gardening. To help and maintain young plants in the process of their growth, install in a pot of styer and tie to it trunk.

Method 11. Marking of the route

In the tourist hits, one color can designate this or that route. In the process, it is better to use the fasteners of bright colors (for example, yellow or orange), which will be well noticeable against the background of foliage.

The ties will move well any weather, they will not fall or do not rot, wherever you are not fixed. And when the need to disappear, just cut the clasp with a knife.

Method 12. loop for cord from lamp

Form the loop on the cord from suspended lamp And fix it with a screed. After that you can hang it on the ceiling, adjusting to the height convenient for you.

Method 13. For reuse

Many people believe that ties can be used only once. In fact, if necessary, and when there is no new fastener at hand, you can use the old one.

Insert the needle or other thin item in the snatch mechanism and press the latch, then just pull the tape back.

Tip! Note that the re-used screed no longer differs in good strength therefore, at the first opportunity it should be replaced.

His experience shared Mikeasaurus from www.instructables.com.

October 11, 2018

If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!

Plastic screed, clip or clamp used when installing for fixing various elements. She is practical and greatly simplifies work. However, this product can also be used to solve various household tasks.

1. Distribution of wires with fixation

We produce a standard clamp of several wires using a plastic screed, but do not drag it. We distribute the conductors in one line. Between the wires also insert a screed that will be perpendicular to the first climax. So do with everything between all the wires. Excess tips need to be cut after pulling up the entire fastener.

2. Pen on the box

Plastic tightening fold into the loop, which bend in half, so that it can be shuffled through the hole for the handle. By installing two screeds to the location of the fixation in the box so that their locks remain inside, we combine the outer loops with an additional clamp.

3. Phone stand

We make two loops from the screed. Their diameter should be such that the mobile phone can be shoved in them. We put them on our device so that the tips after the castle remained behind, and served as a support.

4. Suspended network filter

Tighten the two ties on the network filter on both sides. We insert into them for another closet, making small loops. We will use them in order to hang the design on the hooks.

5. Clamp for wires

From the plastic screed we make a moving loop, pre-cutting the clamps at the end. It can be used as a reusable clamp for convenient storage wires.

6. Circle of glass

So you can get a mug for cold drinks, but a glass is needed that expands up. Tighten the two plastic retainers on the machine in places 3 cm retreating from bottom and top. Through the resulting rings, stretch three tightening, which we connect one to the ring, making the way of the handle. Excess elements cut, giving the product a good aesthetic appearance.

7. How to trim the tip

Usually do it with scissors or bunches. However, then there will be a small tip with sharp edges, which can cause injury. That is why this operation is better to perform with the help of pliers. To do this, they clamp the tip under the most castle and the rotational motion is removed.

8. Economical and safe tightening

Most often, the tight is trying to cut in the middle. In this case, there is a big risk to damage both hands and fixed material itself. Also after such a cut, you have to throw away the used fastening element. If you cut the tighten under the lock, then it can be reused. This method is safer, because in this place there is always a margin of free space.

9. Extension

All tightening have a certain length. Therefore, they are suitable for fixing strictly defined items in volume. It is not recommended to use a tightening on the maximum diameter, because there is a big risk of its output from the lock connection. It is better to simply use two locks, inserting the end of one, in the castle of another.

10. Distribution of the delay

Situations are often found quite often when a similar lock is tightened by a frightened. Most people then throws the tightening. However, there is a way to open it without damage. To do this, a thin metal object will be fused the latch in the lock, and pull the tips back.

11. Hanger for delicate things

The usual wire hanger "Handers", five plastic springs and five plastic screeds will be required. Insert the retainer to each clothespin, which will connect it from the lower crossbar of the hanger. So we will have "Holders" with five clothespins, with which you can safely fix delicate things.

12. Hanger for drying pillows

Wire "Holders" connect each other by the middle of the lower crossbar. Then stretch the hangers, giving them a rhombic form. The pillow is dried, clamping between two folding "shoulders" by hanging them.

13. Rings for a curtain in the shower

Replace the rings for the curtain in the shower can be plastic clips. To do this, they are fought in the champs, fasten on the castle, creating a kind of ring. All unnecessary elements need to be removed so that they do not cling to the material during operation.

14. Ring for keys

Replace the usual key ring can be standard plastic clamp. It is enough to fix it on the keys without producing strong tightening.

15. Bottle Flask

Using a small plastic bottle, tightening and carbine can be made an inexpensive and practical flask. To do this, it will be necessary to use the plastic ring remaining when the cover is opened. If it is not, then we create this item yourself, applying a tightening. Under the ring, I wake the lock, closing it on the castle. So we get a solid loop that can withstand a lot of weight. For it, with the help of a carbine, we are fed to the belt to the belt.

16. Protection of lighters from arbitrary keystroke

So that in the bag or backpack accidentally did not have a click on the lighter button, you need to install a special retainer on it. Make it from the plastic clamp, which is encircled a lighter under the button itself, blocking both its arbitrary and deliberate pressing. You can use the device only after removing the retainer.

17. Plastic bake

If you have sheets that are stitched with the help of a plastic spring, and it is missing itself, then you can make the binding with the help of fumes. Pages are connected by creating a rings through holes in paper. Usually three tightenings, which have symmetrically from each other.

18. Runner tongue

Very often, the tongue on the runner in the "snake" clasp break or pops out of the loop. At the same time, it is impossible to put it back, since the clearance of the fastening element becomes too large, and the physical effect on it can destroy this part. Therefore, it is better to insert a plastic tighten into the slider, creating a ring. It is wider, stronger and does not make sounds when the runner itself is hit.

19. Widget-Spinner do it yourself

For the manufacture we will need three bearings and three plastic ties. Bearings are lined up as three circles. They are fixed with each other, combining a plastic tie. Tighten the loop is very firmly. Next, in places in the docking of bearings we produce clamps by clamps. So we not only produce a kind of separation, but also create fixation of bearings in another plane. After trimming the tips, the spinner is ready.

20. Soap bubbles

If you have lost a ring for starting soap bubbles, it can be done independently. For this, plastic tightening make a loop with a large residual tip. It is used as a handle, and the ring is suitable for the formation of the bubble.

21. Plastic shoelaces

Such a product makes it easy to wear shoes without spending time to unbutton or zeeping. To implement it, it is necessary to connect opposite holes for laces with a plastic tie. The clamping level is adjusted to the leg to measure a convenient position immediately. Excessly cut off.

22. Protection of baggage

On all hiking bags and backpacks there are two sluts on the fastener, which move towards each other. When they together, open the luggage is impossible, but often during transportation these elements are separated independently. So the contents of the bag may be lost or stole it. That this does not happen, the tongues on these sluts are connected to each other with a plastic screed.

23. Pen on the lens

If you wear a plastic screed on the lens, securing it on the adjusting ring, you can make a comfortable handle. It allows you to configure without breaking from the camera to search for an control.

24. Comfortable handle for cover

To the hot cover on the pan did not hit your hands, it needs to be secure. For this, behind her handle is a plastic screed, pulling the tip high up. Lifting the lid for him, you will not only save yourself from touching the hot surface, but you will be on safe deletion From steam.