A simple and understandable guide to tank penetration locations in World of Tanks.

Let's figure out where to pierce tanks, which parts of the tank have thin armor. It is not difficult to find out the penetration points of the tank if you know the locations of the modules and the crew. Each combat vehicle has its own vulnerabilities, such as:

• stern,
• board,
• "cheeks".

It is often possible to successfully pierce the “cheeks” of a tank with large-caliber guns.

Vulnerabilities of tanks

If the tank's armor is thick and the projectile's penetration is below this thickness, then the shot will not penetrate the tank. The armor of all vehicles in World of Tanks is of different thickness in different places. Places with the smallest thickness of armor are called weak points (tank penetration points). To know where to penetrate a tank, you need to know where its vulnerabilities with the smallest thickness of protection are. Hitting such places will give the highest chance of breaking through the armor.

Influence of the angle of impact of the projectile on the penetration of the tank

But perhaps the most important thing is not where the projectile will hit the tank, but at what angle the shot will be fired at the tank. In World of Tanks, there is the concept of reduced armor. This means that the penetration coefficient of the projectile is calculated as the difference from the normal equal to 90 degrees from the plane of the armor to the angle of impact of the projectile. This is how the thickness of the armor that the projectile has to go through at the moment of impact is calculated. The angle of impact directly affects the penetration of tanks.

Where to pierce tanks with thick armor

Part of the heavy tanks, such as the IS-4 and Maus, have a high degree of protection. In particular, Maus - a powerful all-round defense. And the IS-4 has a high frontal one. Such tanks can be penetrated with high-explosive fragmentation shells. Alternatively, you can use gold shells from medium or close range. Aiming at highly armored tanks is based on modules and crew, such as

• ammo rack,
• engine,
• gunner,
• charging.

This tactic will allow you to penetrate tanks with a high probability.

Don't forget protruding parts

Each tank has protruding parts on the hull, such as

• driver hatch,
• commander's cupola
• observation window,
• additional tanks.

To successfully penetrate, aim at the protruding parts of the tank. The effectiveness of hitting bulging parts is high, but often these parts of the tank are small in size, so they should be shot at close range.

Punch twice in the same place

Many tank modules presented in World of Tanks have a set amount of damage points (hp). You can damage the module from the first shot. If you see that the projectile successfully penetrated the tank's armor and damaged the module or incapacitated a crew member, shoot in the same place again. A double hit on the same place of the tank guarantees a second penetration of its protection.

Shoot between the hull and tracks

The vulnerabilities of most tanks are hidden under the protection of the hull. But there is a place where a projectile can hit the hull and damage the engine or undermine the ammunition rack. This place is located between the hull and the tracks of the tank. Under the very bottom of the hull, try to shoot a projectile just above the caterpillar so that the shot hits the part of the tank to which the undercarriage is attached. The level of protection there is minimal and almost every shot will end with a penetration of the hull, damage to the module or crew member.

Aim at the gun and under the turret

Very often there is a situation when you have a tank with 100% hp in front of you, and you need to win with less than 25% health points of your own combat vehicle. Shots on the wide part of the tank gun from the side will help here. With a pierced gun, the tank will lose more than half of its combat effectiveness and become an easy target for you. You can find a punched place under the tower. Break through the tank between the hull and the turret. So you jam the rotation of the turret and the tank will not be able to turn the gun in your direction.

Do you dream of becoming a badass gamer, hitting opponents with a single alpha strike, both in zerg rush and in battles where you have to rely not on the help of friends, but on yourself? Then right now you will have to take care of mods and skins for your beloved World of Tanks! Believe me, your opponents are also scrupulously looking for new ways to increase the power of their tanks. Do not snooze!

Where to download World of Tanks penetration zones?

On the site, you can easily download penetration zones that will help you win more and more victories. Effective tank penetration zones are usually done in color, which allows you to quickly find the enemy's weak point. All that is needed is to hit directly on the target marked on someone else's vehicle.

We check every penetration zone mod before uploading it to the site for download. It means that skins with penetration zones really fulfill their task, and do not let you down in the midst of the battle, indicating the wrong target.

Thanks to the skins, players develop accuracy, intuition faster, and also study enemy tanks from A to Z, including vehicles that you personally will be lucky to control for a long time. The penetration zones themselves can be located anywhere. Shoot at ammunition, fuel tanks and engines, at tank guns! Kill mechanics, loaders, gunners and even commanders!

Keep in mind that tank penetration zones have different degrees of vulnerability, and therefore value. Usually each of the zones is marked with a color, and therefore you will quickly find out which strategy to choose and how to attack.

Using them is very simple and convenient, and most importantly - useful. Otherwise, do not even dream of victories!

Mods and skins with penetration zones for World of Tanks

We have also collected a huge number of mods for your favorite game. make the game brighter, more beautiful, more exciting and 1000 times more effective! Have you already decided what is missing for you to win? Select and install the appropriate mods to prove to everyone that you are not a weakling, even if you only started playing the game a week ago.

Fashion and tank penetration zones both updated and released for the first time .. We have collected about 20 pages of mods alone, not to mention penetration zones. By the way, download penetration zones very convenient using navigation in the right sidebar. And do not forget: your opinion is important for players like you, so be sure to write in the comments about this or that skin.

Shooting and armor penetration- the most important elements of game mechanics. This article contains information about such game parameters as accuracy, armor penetration and damage.

Accuracy

Accuracy- parameter of the gun, which characterizes its ability to send shells exactly at the target.

The game has two aspects related to accuracy:

scatter shells when firing at 100 meters. Measured in meters. The spread depends on the skill of the gunner. An untrained gunner (50% of the main skill) shoots 25% less accurately than a 100% trained gunner. Mixing time- aiming time, measured in seconds. This is a conditional parameter that was introduced for balancing needs. That is, aiming the gun itself at the target is not enough, it is important to wait for the moment when the aiming circle stops decreasing. Otherwise, the probability of a miss increases dramatically. When the tank moves and the turret and barrel turn, as well as after the shot, the sight "diverges", that is, the aiming circle increases sharply and it is necessary to wait for the aiming again. The convergence time is the time during which the circle of convergence decreases by ~2.5 times, to be precise, by e times (e is a mathematical constant, the base of the natural logarithm is ~2.71).

It is also important to understand that in the game (without installing extraneous modifications) a circle of information is displayed, and not a circle of dispersion - these two circles have completely different diameters and, with very rare exceptions, do not coincide with each other. In fact, the scatter circle is smaller than the aiming circle (by several times) and the aim of the aiming range in the game is not to display the spread of shells, but to visualize the state of the gun and its gunner, intact, damaged, the gunner is reduced or reduced, he is healthy or shell-shocked, etc. .

How to increase gun accuracy

• Install hardware Improved ventilation
• The Brotherhood of War(approximately +2.5% to accuracy).
• Use equipment that gives +10% to all crew parameters for one battle, including about 5% to accuracy - Doppayek, Chocolate, Cola box, Strong coffee, tea pudding, Improved Diet, Onigiri.

How to speed up aiming

• Set the gun with the highest aiming speed.
• Level up the gunner's main specialty to 100%.
• Install hardware Reinforced pickup drives(+10% Aim Speed).
• Install hardware Vertical stabilizer(-20% to spread when moving the tank and turning the turret).
• Install hardware Improved ventilation(Approximately +2.5% Aim Speed)
• Upgrade the gunner's skill Smooth turn of the tower(-7.5% to turret spread).
• Upgrade the driver's skill Smooth running(-4% to spread when moving a tank).
• Upgrade a skill to all crew members The Brotherhood of War(Approximately +2.5% Aim Speed).
• Use equipment that gives +10% to all crew parameters for one battle, including about 5% to aiming speed Doppayek, Chocolate, Cola box, Strong coffee, tea pudding, Improved Diet, Onigiri.

Auto-guidance

When you press the right mouse button with the sight aimed at the enemy, auto-aiming is turned on. It fixes the barrel of the tank on the center of the enemy vehicle. This allows you not to aim at the eye, but at the same time has a number of significant drawbacks. The fact is that auto-guidance always aims at the center of the silhouette of an enemy tank, ignoring obstacles in the path of fire, as well as the vector and speed of the enemy’s movement. In cases where only part of the enemy’s vehicle is visible in the sight, or when the target is moving and lead is needed, auto-aiming will not only not be useful, but moreover, it guarantees a miss. Auto-guidance does not allow you to target the weak spots of an enemy tank, so it is relatively of little use at high levels of battles with accurate guns and large well-armored tanks.

Auto-aim is commonly used in close combat during active maneuvers and when firing at long range at a stationary enemy.

Auto-guidance is canceled by pressing E (by default) or by pressing the right mouse button again.

Detailed analysis of shooting mechanics

armor penetration

armor penetration- parameter of the gun, which characterizes its ability to penetrate the armor of enemy tanks. It is measured in millimeters and has a spread of ± 25% relative to the average value. It is important to remember that the armor penetration indicated in the performance characteristics is indicated for the armor plate located at an angle of 90 degrees to the direction of the projectile. That is, the slope of the armor is not taken into account, while most tanks have sloped armor, which is much harder to penetrate. Also, the armor penetration indicated in the performance characteristics is indicated at a distance of 100 m, and with increasing distance it decreases (relevant for sub-caliber and armor-piercing shells and not applicable for high-explosive / HESH and cumulative).

Armor

Each tank has a reservation. However, the thickness of the armor is not the same everywhere. It is the thickest in the front. Behind - on the contrary, the thinnest. The roof and bottom of the tank are also very weakly armored. Armor is specified in the following format: frontal armor thickness/side armor thickness/stern armor thickness. And if the armor, for example, is equal to 38/28/28, then a gun with a penetration capacity of 30 mm in the general case will be able to penetrate the stern and side, but not the forehead. Due to the 25% dispersion, the actual penetration of this gun from shot to shot will vary from 22.5 to 37.5 mm.

It should be remembered that when specifying the armor, its slope is not taken into account. For example, the armor of the T-54 is 120 mm, the angle of inclination is 60°, and the normalization of the projectile is 4-5°. With such a slope, the reduced armor thickness will be about 210 mm. However, even the thickest armor has its vulnerabilities. These are various hatches, machine-gun nests, cabins, joints, etc.

Non-penetration and ricochet

Each projectile has its own penetration threshold. And if it is smaller than the armor of an enemy tank, then the projectile will not penetrate it. To do this, it is necessary to aim at the most vulnerable places of the tank: the stern, sides and various ledges and crevices. If this does not help, you can use high-explosive shells.

When shooting at a tank at an angle, there is a high chance of a ricochet. The boundary between penetration and ricochet lies at an angle of 70°. If the caliber of the projectile exceeds the thickness of the armor more than 3 times, the ricochet does not occur, and if it is doubled, the normalization of the projectile increases in proportion to the excess of the caliber of the gun over the thickness of the armor - and the projectile tries to penetrate the armor at any angle. So, for example, when firing from a 100mm gun with armor penetration of 170, at a 30mm thick armor plate at an angle of 89.99 degrees, the normalization will increase to 23.33 degrees, and the reduced armor will be 30/cos(89.99-23.33)= 75.75mm of armor.

Detailed analysis of armor penetration mechanics

Attention! Update 0.8.6 introduces new penetration rules for HEAT shells:

A HEAT projectile can now ricochet when a projectile hits armor at an angle of 85 degrees or more. With a ricochet, tank penetration in World of Tanks of a ricocheted HEAT shell does not drop.

After the first armor penetration, the projectile begins to lose armor penetration at the following rate: 5% of the armor penetration remaining after penetration - per 10 cm of space traversed by the projectile (50% - per 1 meter of free space from the screen to the armor).

Also in update 0.8.6, the normalization of sub-caliber shells has been reduced to 2°.

Since Update 0.9.3, it has become possible to ricochet to another tank. After the second ricochet, the projectile disappears. You can find out the combat characteristics of any vehicle, for example, damage, armor, and identify penetration zones based on this, in the "Tank Science" section in the World of Tanks Assistant application.

Damage

Damage- parameter of the gun, which characterizes its ability to cause damage to enemy tanks. Measured in units. It is important to remember that the damage indicated in the performance characteristics of the gun is average and in fact varies within 25%, both up and down.

Location of weak points

The location of the various modules in the game is not indicated, but it fully corresponds to the real prototypes. And therefore, if in real life the ammunition was in the left corner of the back of the tank, then in the game it will be there. But still, the weakest points of tanks are located in approximately the same place:

• The engine and fuel tank are usually located in the aft (rear) part of the tank.
• The ammunition rack is located in the center of the hull or in the aft (rear) part of the turret.
• To knock down a tank caterpillar, you need to shoot at the front or last roller.
• The gun and triplexes are visible to the naked eye.
• The commander, as a rule, is in the tower and can be incapacitated by a hit on the commander's cupola.
• The driver sits in front of the machine body.
• The loader and gunner are located in the front or center of the turret.

Damage by modules

Shooting at modules has its own characteristics. Often, when modules are hit, the damage goes to them, but not to the tank itself. Each module has its own durability points (health units). If they are completely removed (critical damage), then the module stops working and it will take some time to restore it. Module health units are not fully restored, but only up to 50%. It remains damaged and may not work as well. Accordingly, it will be easier to break the same module in the future. If new damage is inflicted on the module during the repair process, health points are removed, the repair continues up to 50%. That is, if a tank with a removed caterpillar continues to hit the same caterpillar, then it will be repaired constantly (or until the tank is destroyed).

The repair kit restores the health points of the damaged module up to 100%.

Engine If the module is damaged or after restoration, the maximum movement speed is reduced. With critical damage, movement is impossible. Each engine damage can cause a fire with the probability indicated in the engine description (10-40%). Chance of damage: 45% Caterpillar When the module is damaged, the chance of breaking increases. With critical damage, movement is impossible. Ammunition rack If the module is damaged, the reload time increases. In case of critical damage, the tank is destroyed. At the same time, the number of shells in the ammo rack does not affect the chance of its explosion. Only an empty ammo rack does not explode. Damage Chance: 27% Tank No penalty is applied when the module is damaged. When the tank is critically damaged, a fire starts. Damage Chance: 45% Triplex No penalty is applied when a module is damaged or after repair. With critical damage, the visibility range is reduced by 50%. Chance of damage: 45% Radio station When the module is damaged, the communication radius is halved. Chance of damage: 45% Gun If the module is damaged or after restoration, the accuracy of shooting decreases. With critical damage, firing from a gun and changing its declination are impossible. Chance of damage: 33% Turret rotation mechanism If the module is damaged or after restoration, the rotation speed of the turret is reduced. With critical damage, the rotation of the tower is impossible. Damage Chance: 45%

Crew Damage

Unlike tank modules, the crew does not have health points. A tanker can be either healthy or shell-shocked. A knocked out tanker can be returned to service by using a first-aid kit. Contusion of all crew members is equivalent to the destruction of the tank. When one of the crew members is disabled, all effects from additional skills and abilities learned by him disappear. For example, when a commander is shell-shocked, the "Sixth Sense" light bulb stops working. In addition, if:

The commander is shell-shocked - visibility is halved, the commander's bonus ceases to operate. The driver is shell-shocked - the speed of movement and turns is halved. The gunner is shell-shocked - the spread is doubled, the turret traverse speed is halved. Loader shell-shocked - reload speed is halved. The radio operator is shell-shocked - the communication radius is halved. Crew member shell shock chance: 33%

Detailed analysis of the mechanics of module damage

Tanking Basics

The multiplayer online game World of Tanks is one of the most popular strategies of our time. Despite the already impressive gaming audience, the number of real players is growing exponentially. This happens, firstly, thanks to the constant efforts of developers to improve their content, and, secondly, because of such an integral part of the game as modification packages, published with an enviable frequency. By the way, on our site each visitor can download penetration zones for World of Tanks 1.1.0 and many times improve the quality of the gameplay.

Think back to the beginning of your tank career. Constant failures, offensive defeats and the desire to quit everything. But do not be upset and make hasty decisions. All you need is to upgrade your client a bit. You can start with the skins of penetration zones, which can be downloaded for free on our portal. With their help, of course, you will not be able to acquire tactical skills in combat battles overnight, but you will significantly increase your chances of winning thanks to some tricks. WOT mods, after installing them, will allow you to visually change some of the features of the gameplay. With their help, combat is automatically improved with a significant decrease in the frequency of hitting you from opponents. Along with the improvement of the initial skills, it is also possible to qualitatively improve such skills as an accurate hit and achieving maximum damage during the shelling. The advantage of these modpacks is that they are approved by Wargaming, so they can be downloaded from the official website. This circumstance also unleashed the hands of modders and they began to experiment in full. The world of tank gaming community currently has the opportunity to choose among thousands of unique modifications and everyone can install quite interesting and curious features. So, for example, the standard version of this modpack provides for indicating the places you need to hit with a dashed colored line. In the extended versions, you can no longer see a dotted line, but a very specifically outlined area where projectiles hit. It should be noted that they do not spoil the aesthetic component of WOT, but they can help in difficult times. Also, some modifications allow you to easily identify the location of the enemy crew.

According to statistics free penetration zones and skins for World of Tanks 1.1.0, which can be downloaded on our portal, are among the most requested add-ons to the installed online client. The developers of World of Tanks, in addition to the visual similarity of tanks with their prototypes, tried to give them real technical characteristics, including vulnerabilities. Each combat vehicle has its own armor thickness, as well as areas in which this armor is not so strong. It is not possible for an ordinary player to remember this information, due to the huge number of representatives of combat vehicles. It is in this case that special modification kits come to the rescue, so that the next time you aim your sights, you will see where to point it.

Description

One of the basics that any novice World of Tanks player should be familiar with is tank armor schemes, weak and strong zones in the armor of each vehicle, and armor penetration mechanics as such. Very often, inexperienced players cannot understand why even trying to play carefully and choosing the right positions, they cannot destroy enemy vehicles. All this often happens precisely because there are more than a dozen or even a hundred cars in our game. In addition, different tank branches have a different approach to armor - some have a strong turret and weak sides, while others, on the contrary, have additional screens on the sides, but at the same time weak cheeks of the turret and lower armor plate. And remembering the vulnerable zones of all tanks is not so easy even for experienced players. This mod was created to solve this problem. "Colored skins of penetration zones for World of Tanks 1.5.0.0".

This modification marks the weak points in the armor of tanks, painting them in colored zones visible in the scope, so that you do not have to spend extra time identifying and aiming them. This modification will help you from the very beginning of the game, as it contains colored skins of tanks starting from the second level.

Screenshots

Meaning of colors

• green color - weak places of the reservation;
• red color - tank engine and fuel tank;
• blue color - driver;
• white color - ammo rack;
• orange color - tank crew and other modules;

Installation

Place the mods folder in the World of Tanks root folder.

Mod download section

Mod name	Version	Patch	Server	The size	Link
Colored skins of penetration zones	1.0	1.5.0.0	Our server	158693 Kb