Consumption ecology. Science and technology: Today, an energy generator that does not require fuel is no longer a fantasy of ecology lovers, but a reality. There are many offers on the market for the sale of both home-made and branded fuel-free generators.

What is a BTG (fuelless generator)

Anyone who is thinking about an alternative energy source needs to look at a fuel-free generator. In such a device, the electromechanical device completely replaces the internal combustion engine. Today, an energy generator that does not require fuel is no longer a fantasy of environmentalists, but a reality.

Electricity is generated by a generator that is stimulated by external coils through pulses powered by small batteries. The fuel-free device can be placed anywhere - it is quite compact and does not take up much space. However, it should be convenient to connect to your home network. There are many varieties of fuel-free generators.

Principle of operation

The essence of the action of a fuel-free generator is to convert the chemical energy of the fuel into mechanical energy. The mechanical device cycles the power of the generator, converting it into electricity. The device is started with a hand push. The generator is braked by cutting off the current supply to the coils. The coils are directly pushed by the magnets attached to the device.

The charge generated in the batteries is converted into electricity, which is necessary for the operation of household electrical appliances. An interesting example of a generator is the Hurdershot device. This fuel-free device works thanks to the earth's magnetic field, so you need to position it based on the orientation of the north and south poles. According to experts, it is the most efficient free energy device. In order to get increased power, several generators can be combined.

Overview of manufacturers and prices

Quite popular and publicly available are the generators of the Odessa manufacturer. The most expensive devices on the market are foreign generators from Ferrite. Depending on the power, the price of the device is from 35,000 rubles. Less expensive, but quite popular are Andrus brand generators - from 25,000 rubles.

ENERGSYSTEM LLC

The company specializes in the supply of electrical equipment for various industrial areas. The company has also been operating since 2006 and helps to certify and promote goods on the foreign market. Specializes in the production of magnetic power generators and motors. The magnetic generator contains working stator windings, which are evenly distributed around the circumference and stand motionless in the housing. The generator itself is made of non-magnetic material. The principle of its operation is to provide a constant current with several electromagnets, creating the effect of magnetic balance. As for the electric motor manufactured by ENERGSYSTEM LLC, the principle of its operation is to apply high voltage to the electrodes. The engine is very simple in execution, reliable and has a small weight and dimensions.

NPP KB "VERANO-KO"

The fuel-free wind generator, which is produced by a Ukrainian company, contains the solution of several problems for the use of wind energy:

• able to charge the battery at a wind speed of 2 m / s;
• is able to produce the specified power at a wind strength of 5 m/s, while increasing power if the wind speed increases;
• with a hurricane wind, the device is as stable as possible and free energy is not burned out in thermal resistors.

Generator "VEGA"

It is considered a self-healing device that works due to impulse shocks. The VEGA electric generator is an excellent replacement for a wind generator, solar panels and does not depend on weather conditions. The power of such a fuel-free generator is from 1 to 5 kW. The dimensions of the generator are 40x64x64, weight - up to 7 kg. Being a hybrid system, the VEGA electric generator is capable of converting kinetic energy into high current impulses. To generate it, a generator with an external rotor is used, which is fixed by magnets with individual tension. The box of the device is reliably protected from environmental factors, so the VEGA generator can be considered reliable. His work is 24 hours a day, but at the same time he cannot be attributed to the "perpetual motion machine". The service life of such a device is 20 years.

Where can I buy a fuel-free generator

Fuelless generator. What is included?

The electric generator is a completely autonomous device and is able to generate electricity to fully charge the batteries without the use of fuel. The inertial device can be combined with other devices that are already installed. The fuel-free electric generator set includes:

• aluminum box with Faraday cage;
• generator of required power from 1 to 5 kW;
• control device with battery charging function with impulse up to 2000 V;
• 4 rechargeable batteries for the operation of the coils.

Sometimes, at the request of the customer, capacitors of various capacities can be added, as well as a backup power shield (in systems from 3 kW).

Conclusion

To move to a quality life in the near future, fuel-free energy needs to master the global economic market. Modernization of power units that do not require fuel will make it possible to move towards a healthy society and reduce the shortage of energy in all areas. A fuel-free electric generator in the future will completely abandon solar panels. published

The majority of people are convinced that energy for existence can only be obtained from gas, coal or oil. The atom is quite dangerous, the construction of hydroelectric power plants is a very laborious and costly process. Scientists around the world say that natural fuel reserves may soon run out. What to do, where is the way out? Are humanity's days numbered?

Everything from nothing

Research on the types of "green energy" has recently been conducted more and more intensively, as this is the way to the future. Our planet initially has everything for the life of mankind. You just need to be able to take it and use it for good. Many scientists and just amateurs create such devices? as a generator of free energy. With their own hands, following the laws of physics and their own logic, they do what will benefit all of humanity.

So what are the phenomena? Here are a few of them:

• static or radiant natural electricity;
• use of permanent and neodymium magnets;
• receiving heat from mechanical heaters;
• transformation of earth energy and;
• implosion vortex engines;
• thermal solar pumps.

Each of these technologies uses a minimal initial impulse to release more energy.

Free energy with your own hands? To do this, you need to have a strong desire to change your life, a lot of patience, diligence, a little knowledge and, of course, the necessary tools and components.

Water instead of gasoline? What nonsense!

An engine running on alcohol will probably find more understanding than the idea of ​​decomposing water into oxygen and hydrogen molecules. After all, even in school textbooks it is said that this is a completely unprofitable way of obtaining energy. However, there are already installations for the extraction of hydrogen by ultra-efficient electrolysis. Moreover, the cost of the resulting gas is equal to the cost of cubic meters of water used in this process. Equally important, the cost of electricity is also minimal.

Most likely, in the near future, along with electric vehicles, cars powered by hydrogen fuel will drive around the world's roads. An ultra-efficient electrolysis plant is not exactly a free energy generator. It is quite difficult to assemble it with your own hands. However, the method of continuous production of hydrogen using this technology can be combined with methods for obtaining green energy, which will increase the overall efficiency of the process.

One of the undeservedly forgotten

Devices such as completely maintenance-free. They are absolutely silent and do not pollute the atmosphere. One of the most famous developments in the field of eco-technologies is the principle of obtaining current from the ether according to the theory of N. Tesla. A device consisting of two resonantly tuned transformer coils is a grounded oscillatory circuit. Initially, Tesla made a free energy generator with his own hands in order to transmit a radio signal over long distances.

If we consider the surface layers of the Earth as a huge capacitor, then we can imagine them as a single conductive plate. The second element in this system is the ionosphere (atmosphere) of the planet, saturated with cosmic rays (the so-called ether). Through both of these "plates" are constantly flowing electric charges of different poles. To "collect" currents from near space, you need to make a free energy generator with your own hands. 2013 was one of the most productive years in this area. Everyone wants free electricity.

How to make a free energy generator with your own hands

The scheme of a single-phase resonant device N. Tesla consists of the following blocks:

1. Two conventional 12 V batteries.
2. with electrolytic capacitors.
3. Generator that sets the standard frequency of the current (50 Hz).
4. Current amplifier block directed to the output transformer.
5. Converter of low-voltage (12 V) voltage to high-voltage (up to 3000 V).
6. A conventional transformer with a winding ratio of 1:100.
7. Voltage step-up transformer with high-voltage winding and tape core, power up to 30 W.
8. Main transformer without core, with double winding.
9. A step-down transformer.
10. Ferrite rod for system grounding.

All units of the installation are connected according to the laws of physics. The system is set up experimentally.

Is it all true?

It may seem that this is absurd, because another year when they tried to create a free energy generator with their own hands is 2014. The circuit described above simply uses battery power, according to many experimenters. To this the following may be objected. Energy enters the closed circuit of the system from the electric field of the output coils, which receive it from a high-voltage transformer due to the mutual arrangement. And the charge of the battery creates and maintains the strength of the electric field. All other energy comes from the environment.

Fuel-free device for receiving free electricity

It is known that the occurrence of a magnetic field in any engine is facilitated by ordinary ones made of copper or aluminum wire. To compensate for the inevitable losses due to the resistance of these materials, the engine must run continuously, using part of the generated energy to maintain its own field. This significantly reduces the efficiency of the device.

In a transformer powered by neodymium magnets, there are no self-induction coils, and, accordingly, there are no losses associated with resistance. When using a constant, they are generated by a rotor rotating in this field.

How to make a small DIY free energy generator

The schema used is:

• take a cooler (fan) from the computer;
• remove 4 transformer coils from it;
• replace with small neodymium magnets;
• orient them in the original directions of the coils;
• by changing the position of the magnets, you can control the speed of rotation of the motor, which works completely without electricity.

This almost retains its performance until one of the magnets is removed from the circuit. By attaching a light bulb to the device, you can illuminate the room for free. If you take a more powerful engine and magnets, you can power not only a light bulb, but also other household electrical appliances from the system.

On the principle of operation of Tariel Kapanadze's installation

This famous do-it-yourself free energy generator (25kW, 100kW) is assembled according to the principle described by Nikolo Tesla back in the last century. This resonant system is capable of producing a voltage many times greater than the initial impulse. It is important to understand that this is not a "perpetual motion machine", but a machine for generating electricity from freely available natural sources.

To obtain a current of 50 Hz, 2 square-wave generators and power diodes are used. For grounding, a ferrite rod is used, which, in fact, closes the Earth's surface to the charge of the atmosphere (ether, according to N. Tesla). Coaxial cable is used to supply a powerful output voltage to the load.

In simple words, a do-it-yourself free energy generator (2014, scheme by T. Kapanadze) receives only an initial impulse from a 12 V source. The device is capable of constantly supplying standard electrical appliances, heaters, lighting, and so on with normal voltage current.

The assembled do-it-yourself self-powered free energy generator is designed to complete the circuit. Some craftsmen use this method to recharge the battery, which gives the initial impulse to the system. For your own safety, it is important to consider the fact that the output voltage of the system is high. If you forget about caution, you can get a severe electric shock. Since a 25kW do-it-yourself free energy generator can bring both benefits and dangers.

Who needs all this?

Almost anyone who is familiar with the basics of the laws of physics from the school curriculum can make a free energy generator with their own hands. The power supply of your own home can be completely transferred to the ecological and affordable energy of the ether. With the use of such technologies, transportation and production costs will be reduced. The atmosphere of our planet will become cleaner, the process of the "greenhouse effect" will stop.

The universal use of electricity in all spheres of human activity is associated with the search for free electricity. Because of this, a new milestone in the development of electrical engineering was an attempt to create a free energy generator that would significantly reduce the cost or reduce the cost of generating electricity to zero. The most promising source for the implementation of this problem is free energy.

What is free energy?

The term free energy arose at the time of the large-scale introduction and operation of internal combustion engines, when the problem of obtaining electric current directly depended on the coal, wood or oil products spent for this. Therefore, free energy is understood as such a force, for the production of which there is no need to burn fuel and, accordingly, to spend any resources.

The first attempts to scientifically substantiate the possibility of obtaining free energy were laid by Helmholtz, Gibbs and Tesla. The first of them developed the theory of creating a system in which the generated electricity must be equal to or greater than that spent for the initial start-up, that is, obtaining a perpetual motion machine. Gibbs expressed the possibility of obtaining energy during the course of a chemical reaction so long that it was enough for a full-fledged electricity supply. Tesla observed energy in all natural phenomena and expressed the theory of the presence of ether - a substance that permeates everything around us.

Today you can observe the implementation of these principles for obtaining free energy in. Some of them have long stood at the service of mankind and help to obtain alternative energy from wind, sun, rivers, tides. These are the same solar panels, hydroelectric power plants that helped to curb the forces of nature, which are freely available. But along with already justified and implemented free energy generators, there are concepts of fuelless engines that try to circumvent the law of conservation of energy.

The problem of conservation of energy

The main stumbling block in getting free electricity is the law of conservation of energy. Due to the presence of electrical resistance in the generator itself, connecting wires and other elements of the electrical network, according to the laws of physics, there is a loss of output power. Energy is consumed and its replenishment requires constant replenishment from the outside, or the generation system must create such an excess of electrical energy that it is enough to power the load and maintain the operation of the generator. From a mathematical point of view, a free energy generator should have an efficiency of more than 1, which does not fit into the framework of standard physical phenomena.

Diagram and design of the Tesla generator

Nikola Tesla became the discoverer of physical phenomena and created many electrical devices based on them, for example, Tesla transformers, which are used by mankind to this day. Throughout the history of his activity, he has patented thousands of inventions, among which there is more than one free energy generator.

Rice. 1: Tesla Free Energy Generator

Look at Figure 1, here is the principle of generating electricity using a free energy generator assembled from Tesla coils. This device involves obtaining energy from the ether, for which the coils included in its composition are tuned to a resonant frequency. To obtain energy from the surrounding space in this system, the following geometric relationships must be observed:

• winding diameter;
• wire sections for each of the windings;
• distance between coils.

Today, various applications of Tesla coils are known in the design of other free energy generators. However, no significant results of their application have yet been achieved. Although some inventors claim the opposite, and keep the result of their developments in the strictest confidence, demonstrating only the final effect of the generator. In addition to this model, other inventions of Nikola Tesla are known, which are generators of free energy.

Magnetic free energy generator

The effect of the interaction of a magnetic field and a coil is widely used in. And in a free energy generator, this principle is used not to rotate a magnetized shaft by supplying electrical impulses to the windings, but to supply a magnetic field to an electric coil.

The impetus for the development of this direction was the effect obtained by applying voltage to an electromagnet (a coil wound on a magnetic circuit). In this case, a nearby permanent magnet is attracted to the ends of the magnetic circuit and remains attracted even after the coil is powered off. A permanent magnet creates a constant flux of a magnetic field in the core, which will hold the structure until it is torn off by physical force. This effect was applied in the creation of a permanent magnet free energy generator circuit.

Rice. 2. The principle of operation of the generator on magnets

Look at Figure 2, to create such a free energy generator and power the load from it, it is necessary to form an electromagnetic interaction system, which consists of:

• starting coil (I);
• locking coil (IV);
• supply coil (II);
• support coil (III).

The circuit also includes a control transistor VT, a capacitor C, diodes VD, a limiting resistor R and a load Z H.

This free energy generator is turned on by pressing the "Start" button, after which the control pulse is applied through VD6 and R6 to the base of the transistor VT1. When a control pulse arrives, the transistor opens and closes the current flow circuit through the starting coils I. After that, electric current flows through the coils I and excites the magnetic circuit, which will attract a permanent magnet. The magnetic field lines will flow along the closed circuit of the magnet core and the permanent magnet.

EMF is induced from the flowing magnetic flux in coils II, III, IV. The electrical potential from the IV coil is fed to the base of the transistor VT1, creating a control signal. The EMF in coil III is designed to maintain the magnetic flux in the magnetic circuits. The EMF in coil II provides power to the load.

The stumbling block in the practical implementation of such a free energy generator is the creation of a variable magnetic flux. To do this, it is recommended to install two circuits with permanent magnets in the circuit, in which the lines of force have the opposite direction.

In addition to the above free energy generator on magnets, today there are a number of similar devices designed by Searle, Adams and other developers, the generation of which is based on the use of a constant magnetic field.

Followers of Nikola Tesla and their generators

The seeds of incredible inventions sown by Tesla created in the minds of applicants an unquenchable thirst to translate into reality the fantastic ideas of creating a perpetual motion machine and send mechanical generators to the dusty shelf of history. The most famous inventors used the principles set forth by Nikola Tesla in their devices. Consider the most popular of them.

Lester Hendershot

Hendershot developed a theory about the possibility of using the Earth's magnetic field to generate electricity. Leicester presented the first models back in the 1930s, but they were never in demand by his contemporaries. Structurally, the Hendershot generator consists of two counter-wound coils, two transformers, capacitors and a movable solenoid.

Rice. 3: general view of the Hendershot generator

The operation of such a free energy generator is possible only with its strict orientation from north to south, therefore, a compass must be used to set up the work. Coils are wound on wooden bases with multidirectional winding to reduce the effect of mutual induction (when EMF is induced in them, EMF will not be induced in the opposite direction). In addition, the coils must be tuned by a resonant circuit.

John Bedini

Bedini introduced his free energy generator in 1984, a feature of the patented device was an energizer - a device with a constant torque that does not lose momentum. This effect was achieved by installing several permanent magnets on the disk, which, when interacting with the electromagnetic coil, create impulses in it and repel from the ferromagnetic base. Due to this, the free energy generator received the effect of self-feeding.

Later Bedini generators became known through a school experiment. The model turned out to be much simpler and did not represent something grandiose, but it was able to perform the functions of a generator of free electricity for about 9 days without outside help.

Rice. 4: circuit diagram of the Bedini generator

Look at Figure 4, here is a schematic diagram of the free energy generator of that same school project. It uses the following elements:

• a rotating disk with several permanent magnets (energizer);
• a coil with a ferromagnetic base and two windings;
• battery (in this example, it was replaced with a 9V battery);
• control unit of a transistor (T), resistor (R) and diode (D);
• current collection is organized from an additional coil that feeds the LED, but it is also possible to supply power from the battery circuit.

With the start of rotation, permanent magnets create a magnetic excitation in the core of the coil, which induces an EMF in the windings of the output coils. Due to the direction of the turns in the start winding, the current begins to flow, as shown in the figure below, through the start winding, resistor and diode.

Rice. 5: Starting the Bedini Generator

When the magnet is directly above the solenoid, the core is saturated and the stored energy becomes sufficient to open the transistor T. When the transistor is opened, the current begins to flow in the working winding, which recharges the battery.

Figure 6: Starting the floating charge winding

The energy at this stage becomes sufficient to magnetize the ferromagnetic core from the working winding, and it receives the pole of the same name with a magnet located above it. Thanks to the magnetic pole in the core, the magnet on the spinning wheel is repelled from this pole and accelerates the further movement of the energizer. With the acceleration of the movement, the pulses in the windings occur more and more often, and the LED switches from a flashing mode to a constant glow mode.

Alas, such a free energy generator is not a perpetual motion machine; in practice, it allowed the system to work ten times longer than it could operate on a single battery, but eventually it stops anyway.

Tariel Kapanadze

Kapanadze developed a model of his free energy generator in the 80s and 90s of the last century. The mechanical device was based on the work of an improved Tesla coil, as the author himself claimed, a compact generator could feed consumers with a power of 5 kW. In the 2000s, an industrial-scale 100 kW Kapanadze generator was built in Turkey; according to its technical characteristics, it needed only 2 kW to start and operate.

Rice. 7: Kapanadze generator circuit diagram

The figure above shows a schematic diagram of a free energy generator, but the main parameters of the circuit remain a trade secret.

Practical schemes of free energy generators

Despite the large number of existing free energy generator circuits, very few of them can boast of real results that could be tested and repeated at home.

Rice. 8: Tesla generator working diagram

Figure 8 above is a free energy generator circuit that you can replicate at home. This principle was set forth by Nikola Tesla, for its operation a metal plate is used, isolated from the ground and located on some kind of hill. The plate is a receiver of electromagnetic oscillations in the atmosphere, this includes a fairly wide range of radiation (solar, radio magnetic waves, static electricity from the movement of air masses, etc.)

The receiver is connected to one of the capacitor plates, and the second plate is grounded, which creates the required potential difference. The only stumbling block to its industrial implementation is the need to isolate a large plate on a hill to power at least a private house.

Modern look and new developments

Despite the widespread interest in creating a free energy generator, they still cannot oust the classical method of generating electricity from the market. The developers of the past, who put forward bold theories about a significant reduction in the cost of electricity, lacked the technical perfection of the equipment or the parameters of the elements could not provide the desired effect. And thanks to scientific and technological progress, humanity receives more and more new inventions that make the embodiment of a free energy generator already tangible. It should be noted that today free energy generators operating on the power of the sun and wind have already been received and actively operated.

But, at the same time, on the Internet you can find offers to purchase such devices, although for the most part these are dummies created to deceive an ignorant person. And a small percentage of really working free energy generators, whether they are based on resonant transformers, coils or permanent magnets, can only cope with the power supply of low-power consumers, they cannot provide electricity, for example, to a private house or lighting in the yard. Free energy generators are a promising direction, but their practical implementation has not yet been implemented.

The high cost of traditional energy sources makes more and more people think about creating an alternative energy source. As a rule, the choice is given to the so-called fuel-free generators, because their operation does not require either an internal combustion engine or another device in which valuable raw materials will be burned.

During operation of the fuelless generator, the electricity in the system is recirculated through the coil in the opposite direction, thereby ensuring the presence of voltage in the electrical network.

Currently, there are two ways to create a fuel-free generator, namely wet, it is also called oil and dry.

When creating a generator in a wet way, you need a battery. While the dry method generator does without a battery.

wet method

In order to assemble a wet fuelless generator, the following components are required: The battery is needed to accumulate energy in it and store it.

Transformer - used to create direct current.

An amplifier is needed to increase the current supply. This is necessary due to the fact that the battery is not able to reproduce the required power, as a rule, its maximum power is 12 or 24 V.

The charger ensures uninterrupted operation of the generator.

Generator Assembly Diagram

The AC transformer is connected to a permanent network, to the battery, and then to the power amplifier. Then you need to add a charger to the circuit. The expansion sensor completes the assembly step, which is connected back to the battery.

dry method

The principle of operation of a dry fuelless generator is based on the presence of capacitors. This type of energy production is currently the most advanced and efficient. Since it can work continuously and without recharging for 3 years.

Dry generator circuit

The generator has a simple circuit, which consists of a pair of coils with capacitors, transformers and a magnet. The peculiarity of this generator is that the coils must be tuned in resonance with each other. And the model itself should be oriented strictly from north to south.

The creation of a dry fuel-free generator begins with the creation of coils. To do this, take a copper wire with a cross section of 1.5 mm, it should be wound on wooden sticks, which are fixed at a distance of 500 mm from one another. It should be remembered that the number of turns on both sticks must be equal (for example, 12 turns).

The second layer of turns should be made with a wire with a large cross section (for example, 2.5 mm). This wire, like the previous one, is laid on two coils, but already six turns each. Further, it is recommended to take another wire, but of a different color and section of 2.5 mm, and make 6 more turns. It is very important that the number of skeins and the direction of winding are the same.

Next, the finished coils are fixed on the movable mechanism. It should be remembered that when moving the coils, they must walk without effort, distortion and tension. Next, you can begin to assemble the entire mechanism. A magnetic resonator (magnet) is fixed in front of the coils, then you should take capacitors of at least 500 microfarads and place one capacitor inside the coils and two capacitors on the outside. The last one is the transformer. All parts are interconnected by soldering.

How to check if it works?

There are two ways to check the operability of the generator: by connecting a light bulb to it and with a multimeter. During the test, it must be taken into account that contact with the light bulb must be constant and good. If there is sufficient charge in the battery, the light bulb will burn with the same power, if the lamp blinks or fades, it is necessary to check the circuit for breaks.

To check the operation of the generator with a multimeter, switch the device to the "Ring" state. If the device does not have this function, then set the resistance equal to 1 ohm. If everything is assembled correctly and the generator is working, then in the “ringing” mode, when two contacts are closed, the multimeter will ring.

Electricity helps mankind to solve a huge range of household and industrial problems, but its production requires a constant expenditure of resources from a person. The most efficient today are fuel generators that are used at thermal power plants, in mobile models of gasoline and diesel generators. But the development of progress does not stand still - humanity is constantly trying to reduce the cost of the electricity it receives through the introduction of innovations. One of the most revolutionary ideas is to create a fuel-free generator that can be rotated without spending resources.

What is a BTG (Fuelless Generator)?

The idea itself is relatively not new, the concept of a fuel-free generator is understood as a device that will generate electricity without the need to spend resources to rotate its shaft. At the base of this idea stood such prominent scientists as Tesla, Einstein, Hendershot and others. In those days, steam was used to start and operate the generator, obtained by burning some kind of fuel, from which the name fuel-free arose.

Nowadays, it is no longer necessary to use fuel to generate electrical energy. They learned to generate it from solar energy, wind energy, rivers, ebbs and flows. But the devices proposed by the founding physicists of electrical engineering still border on science fiction and continue to excite the imagination of both eminent scientists and ordinary people.

Principle of operation

Any generating device is built on the principle of generating electric current through the directed movement of charged particles in a conductive medium. This effect can be achieved through:

• Generation of an alternating magnetic flux - when an EMF is induced in the conductor from a magnetic field from the outside;
• The flow of charged particles between media with different potentials;
• Self-generation - an operating mode in which the device increases the power of the initial pulse, which allows you to maintain its performance and accumulate part of the energy to power some third-party consumer.

The only reason why such a plan cannot be fully realized is the law of conservation of energy. To get some kind of energy, you still need to spend another kind. Therefore, the idea of ​​​​inventing a fuel-free generator gave rise to a lot of myths around this issue and gave rise to adventurers.

Myth or reality?

I note right away that great minds created the idea of ​​a fuel-free generator not for commercial gain. People like Nikola Tesla, Albert Einstein were driven by a completely natural thirst for knowledge and the desire to make this world a better place, and not a banal enrichment. As evidenced by the chronicles of their activities, they managed to achieve incredible success. Many of their achievements left behind much more questions than answers, which gives our contemporaries a reason to continue daring and scientific competition.

The reason why great scientists could not realize their inventions was the imperfection of technology or the absence of any component that would provide a stable result. Our contemporaries in scientific laboratories and at home are trying to implement the unrealized ideas of creating a fuel-free engine, sometimes for scientific purposes, sometimes for profit. But it has not yet been possible to achieve the desired and establish the production of a fuel-free generator on an industrial scale.

Due to the hectic activity of scammers on the Internet, you will find a lot of offers to buy a fuel-free generator, but these models do not have working capacity. As a rule, unscrupulous inventors take advantage of the ignorance of the population in matters of electrical engineering, create beautiful packaging and sell a dummy under the tempting name of a fuel-free generator. But this does not mean that working schemes do not exist, consider examples of the most famous of them.

Overview of BTG and their schemes

Today, there are a fairly large number of fuel-free generators of various designs and operating principles. Of course, not all models and the principle of their operation were covered by the creators for the masses. Most fuel-free generators remain a secret, sacredly guarded by creators and patents. We can only analyze the available information about the principle of their action and general information about their effectiveness.

Adams generator - "Vega"

A fairly efficient magnetic type generator invented on the basis of the theory put forward by the scientists Adamsosm and Bedini. The operation of the generator is based on a rotating magnetic rotor, which is recruited from permanent magnets with the same pole orientation. When the rotor rotates, a synchronous magnetic field is created, which induces an EMF in the stator windings. To maintain the torque of the rotor, short-term electromagnetic pulses are applied to it.

The industrial implementation of this principle was received by the Vega generator, which comes from the abbreviation Adams Vertical Generator, which is designed to supply power to private houses, summer cottages, and shipping devices. Due to short-term pulses, a pulsating voltage is created at the output, which is supplied to the batteries for charging, and from them it is inverted into an alternating industrial frequency. But the question of the conformity of the declared parameters with its real capabilities is quite controversial.

Tesla generator

It was patented by a famous Serbian physicist over a hundred years ago. The principle of operation is the presence of electromagnetic radiation in the atmosphere of the Earth, while the planet itself represents a much lower level of potential.

Rice. 1. Schematic diagram of the Tesla generator

Look at the picture, the Tesla fuel-free generator conditionally consists of the following parts:

• Radiation receiver - made of a conductive material located on a dielectric base. The receiver must be isolated from the ground and placed as high as possible;
• capacitor (C) - designed to accumulate an electric charge;
• grounding - designed for electrical contact with the ground.

The principle of operation is to receive electromagnetic energy by the receiver, which begins to flow through a closed circuit to the ground. But, due to the presence of a capacitor, the charge does not flow down the ground electrode, but accumulates on the plates. When connected to a load capacitor, the device will be powered by discharging the capacitor. In addition, the design can be supplemented with automation and converters for uninterrupted power supply together with recharging.

Rossi generator

The operation of this fuel-free generator is based on the principle of cold nuclear fusion. Despite the absence of classical turbines powered by steam or combustion of petroleum products, instead of burning fuel, a chemical reaction between nickel and hydrogen is used for its operation. In the chamber of the Rossi generator, an exothermic reaction occurs with the release of thermal energy.

It should be noted that for the normal course of the reaction, a catalyst is used and electricity is consumed. According to Rossi, the amount of thermal energy produced is 7 times more than the electricity consumed. This model is already beginning to be implemented for space heating and power generation. But, since for work it is still necessary to fill the installation with working reagents, it cannot be called completely fuel-free.

Hendershot Generator

The principle of operation of this fuel-free generator was proposed by Lester Hendershot and is based on the conversion of the Earth's magnetic field into electrical energy. The theoretical substantiation of the model was proposed by the scientist back in 1901 - 1930, it consists of:

• electrical coils in resonance;
• metal core;
• two transformers;
• capacitors;
• permanent magnet.

For the circuit to work, the orientation of the coils from north to south must be observed, due to which the rotation of the magnetic field will occur, which will generate an EMF in the coils.

Mark Hendershot, son of Lester Hendershot presents his BTG

The scheme of this BTG also goes on the network (figure below). How true it is, I cannot say.

Hendershot generator circuit

Generator Tariel Kapanadze

Our contemporary claims that he discovered the possibility of obtaining electrical energy from the ether, working with Tesla coils and continuing the research of the famous scientist. Kapanadze's fuel-free generator consists of a Tesla coil, a capacitor bank, a battery and an inverter, but this arrangement is just a guess, the inventor himself keeps the design of the fuel-free generator in the strictest confidence.

Rice. 2: general view of the Kapanadze generator

Look at figure 2, here is a general view. Today, there are rumors about an attempt to implement the device on a large scale for the needs of consumers in some countries, but they have not been able to achieve the final result.

The electrical circuit of this generator also goes through the network (figure below). But how true it is, we cannot say.

Chmielewski generator

According to the official version, Khmelevsky's fuel-free generator was discovered by accident, as the creator conceived it as a power supply unit for converting direct current into alternating current. But it has found wide application in geological exploration and has become widespread in expeditions moving away from sources of central energy supply.

Such a fuel-free generator consists of a split-winding transformer, resistors, capacitors and a thyristor. Electricity is generated due to the special design of the transformer itself, which can create a counter EMF more than at the input. This result is achieved due to the resonant effect and the application of a voltage of a certain frequency and amplitude.

John Searle generator

The fuel-free Searl generator is based on the principle of magnetic interaction between the core and the rollers. In which the magnetic rollers are placed at an equidistant distance and tend to maintain their position after setting the system in motion. The composition of the magnetic motor includes a multi-component fixed core around which the same multi-component rollers rotate. Coils are installed along the diameter around the rollers, in which an EMF is generated when a magnetic roller passes near them. To start the device, starting electromagnets are used, which supply impulses that set the rollers in motion.

Rice. 3: general view of the Searl generator

According to Searle, the rollers themselves increase the speed of rotation due to the alternating magnetic field created by the opposite-pole alignment of the magnets inside the rollers and inside the stationary core. In the manufacture of a structure in three levels, the speed of rotation leads not only to the generation of electricity, but also reduces the mass of the device up to the anti-gravity effect.

Romanov generator

The principle of operation of the fuel-free Romanov generator is to supply standing waves to one of the capacitor plates, while the second plate is directly connected to the ground.

Rice. 4: working principle of Romanov generator

Look at the figure, here is the principle of operation of the device, when one plate is connected to the ground, a certain charge arises on it. Standing waves on the second plate generate a potential that is significantly different from the ground potential. Coils with multidirectional winding act as a standing wave generator, in which eddy currents compensate for the active component of the current. Once charged, the capacitor can be used to power electrical appliances as a load.

But it was not possible to achieve unequivocal success for domestic or industrial purposes in the implementation of this model.

Schauberger generator

Such a fuel-free generator is based on obtaining torque on the turbine by moving water through the pipe system and further converting mechanical energy into electrical energy. To obtain this effect, the design of the generator uses a through flow of water obtained from the movement of water from the bottom up.

Rice. 5: schematic diagram of the Schauberger generator

The principle of operation of this mechanical generator is based on obtaining cavitation cavities in a liquid - a state of rarefaction close to vacuum, due to which water does not move from top to bottom, as we are used to seeing in nature, but from bottom to top, which drives the rotor of an electric generator and creates a closed loop. When water rises up through the inner tubes and falls back into the original reservoir.

Is it possible to make a fuel-free generator with your own hands?

Many of the generators discussed above cannot be implemented at home. In some cases, their authors do not provide electrical circuits for general use, in others, autonomous work ends some time after the start of generation. But there are models that you can try to implement at home on your own. But we do not give any guarantee. This is just an attempt and one of the possible implementations.

Consider, for example, the manufacture of a fuel-free Tesla generator. For this:

Rice. 9: measure the charge of the capacitor

As you can see, the Tesla fuel-free generator really works, and you can build it at home yourself. The main drawback is that it can only power an LED, and even then for a few seconds at most. The power of such a device depends on the area of ​​​​the receiver and the capacitance of the capacitor. And if it is still possible to select high-capacity capacitors, then creating a receiver the size of a football field so that at least a house can be powered uninterruptedly is quite problematic.

Video selection on the topic