If from the side of the balcony blows, or the door opens, closes badly, the problem is absolutely not necessarily as a door or unfair installation. Often the situation can be corrected by adjustment. How to adjust the balcony plastic door?

If the warranty period has not yet come out, you can call the masters from your installer. Moreover, the installers were required to adjust the door at the end of the installation. But someday the warranty will end, and you still have to regulate the door yourself, if you do not want to spend your extra money. Doors are increasing much faster than the windows: they have more weight, they are open-closed more often.

Important: New houses during the first year give shrinkage. During this period, you need to follow the door. In the running version, the design may be deformed.

Qualitatively installed and adjusted door:

Tightly and evenly pressed all over the perimeter;

There are no visible distilts and deviations from the vertical;

Resistant in the open position (in the absence of wind).

Video "Adjustment of plastic balcony doors":

Condition status is checked using a paper sheet. The sheet is placed between the sash and the frame, lock the door, pull out the paper. It should be removed with some effort.

It is possible to identify the irregularities of the installation (the web is poorly combined with the frame) with a simple pencil. You need to circle a locked door around the perimeter, open and see how much the line is parallel to the edge of the frame.

The adjustment of the plastic balcony door is also necessary if: the handle is poorly rotated, the seal is unevenly deformed. If he was deformed below, the door must be raised by adjusting the bottom loop, if at the top - to lower a little, adjusting the upper one.

Instruction

Required tool kit:

Keys and hexagons of different sizes;

Pliers;

Screwdrivers, slotted and cross;

Roulette.

There are three hinges on the door, in which there are adjusting screws. The adjustment of the plastic balcony door is made as follows:

1. Open the door, unscrew screws, fixing decorative lining, hexagon 3.

2. Close the door, remove the lining.

3. Under the lining there is a screw, located horizontally. With it, the door is adjusted horizontally. To raise the lower corner of the sash, you need to tighten the screws in two hinges, top and medium.

4. If there is a need to shift the canvas to the right / left completely, you need adjusting horizontal screws of all three loops.

5. To adjust the plastic balcony vertical vertical (lift / lower), screws are used in the lower parts of the loops and the hex key 5.2. The door is lowered by rotating the screw clockwise. In the opposite direction - rises.

6. Move the lower angle to the right / left can be tightening the same screw on the bottom loop.

7. To adjust the upper or lower response, use the hexagon 2.5.

8. The shut-off bar can be tightened with a cross screwdriver.

9. For adjustment of the clips, a special axle axle is used on the accessories. It is turning the passage. To reduce the clamp, the pin is rotated into the parallel with the profile (this is the extreme position) to zoom in - across.

10. In other models, there are no axles, the adjustment of the plastic balcony door is performed on the retaliatory bar. In this case, you need to insert the hex key on the bar on the bar and make something about half the turn.

PVC balcony doors have become so familiar in life that many of them are granted for many. Therefore, the emergence of problems in their operation is a complete surprise for the owners. Many in a panic urgently seek the phones of the repairmen. Experience shows: in such situations there is no need to rush. It is easy to reveal the problem yourself and eliminate it, because the adjustment of the plastic doors of the balcony with their own hands is not such a difficult thing.

For those who first bind to the type of repair, we give detailed instructionsHow to adjust the plastic door on the balcony yourself.

When you need to adjust the door

Only accidents and disasters occur in the world. All other problems are aging gradually. This thesis fully applies to the balcony door. As it is exploited, it gradually changes the geometry and the clamping force that over time, if not to take appropriate measures, can lead to replacement of accessories, fully or separate items. Diagnose and troubleshoot problems early stage quite simple.

1. Crane power can be checked in several ways:

• bring to K. closed door burning match or candle. If the flame began to play, then drafts and doors are walking between the box and the door;
• slide into the gap between the box and the doorpace paper. If it is easily elongated from under the closed door, it is necessary to carry out the appropriate adjustments. Checking each side.

An ideal option is considered if the paper sheet is pulled out with the same effort from all sides of the sash - the geometry is not violated, and the strength of the clamp, if necessary, can be easily adjusted.

2. The most difficult case, if the door begins to change the geometry. There are also several ways of early diagnosis:

• open the door to 45 o and leave for a short time. If it spontaneously, without the help of wind, completely opened or closed - the door has resulted due to the weakening of the upper loop;
• go to the balcony. Close the door. On the inner perimeter of the door frame, using its edge as a ruler, draw on the door the scheme of its adjacent to the box profile. The lines must be parallel to the edges of the door, and the width of all drawn strips is the same. Any deviations require a new door fittings setting.

Attention: different width Striped vertical, for example, from the side of the handle 5-6 mm, and the loops of 3-4 mm, rather talking about the factory marriage than the need to carry out adjustment work.

• carefully inspect the seals. With impaired geometry, some of them will be differently deformed (crumpled).

If time is missed for successful repair need to establish a cause of fault:

• the bottom of the door began to chain the door box. The reason is always in the large weight door. Door accessories are calculated by weight up to 120-135 kg. The door together with a single-chamber double-glazed glass weighs 35-40 kg. With an increase in the number of cameras, glass thickness or glazing area weight of the door is approaching 60 kg, which is critical for the loops of any manufacturer. Metal canopies during the operation of the door tritely tired, as a result of which the sash sends;

• the door canvas clings to the door frame in the middle. Here are two reasons: there was a deformation of the door profile outside or it shifts in sides under the influence of high temperature (the door canvas expands, and the loops pushed it on the front side);
• the door is badly closed - In the pressed position, the handle does not start the trough in the retaliatory bar (in the language of specialists - the response). There are also two reasons: the door of the village, as a result of which the eccentrics (hooks) of the shut-off strip do not get to the grooves of the platform; The door leaf profile was deformed inside, pulling the hooks - they stopped getting to the team or the box arched out with the same result;
• door canvas easily adjacent to the box. So as not to the blow, it is necessary to regulate the pin and the response;
• knock knob - the door was open too quickly;
• the handle loosened or broke. This happens with intensive operation of the door flap;
• cracked glass in a double-blade - the door canvase profile profile has occurred;
• cracked Plastic Door Box or Door Little - Cause in shrinkage at home, not in the door.

Adjusting balcony doors

No matter how reasons, there were problems at the door to the balcony, for their adjustment will be required:

• furniture keys №4 and 5;

• slotted and crucible screwdriver;
• construction parliament;
• passatia;
• plastic strips.

Tools in stock. Now consider how to adjust the plastic balcony door in each case.

Pens

Using the handle, the control of the balcony doors is not possible. It only removes the tricks of the shut-off strip from the grooves of the platform (opens the door) or fixes them there (closes). Intensive operation often makes it difficult to this process: the handle works badly. Problems can be easily corrected by conducting independent repair. The main thing is to deal with what happened. A pen:

• loosened;
• broke;
• jammed;
• tight turns.

Loosened. The weak landing of the handle on the door (staggers in the hands) speaks of the worn hardware, holding it. The problem is eliminated very simply: the closing fastening lining of the bar needs to be a little submitted, after which turn 90 o (see photo). A screwdriver or cruciform screwdriver to twist screws until it stops. The bar is returned to the place.

The handle broke down. The technology process is similar to the previous type of repair:

1. planck is delayed and rotated to the side;
2. self-tapping screws are turned off completely;
3. the broken handle is removed;
4. a new handle is set, in the same position that there was old (depends on whether the door is open or closed);
5. mounting a mounting plan;
6. the pad returns to the place.

Jammed. Due to negligent, more precisely, the hasty opening of the doors, the blocking mechanism does not always have time to work, after which it is impossible to rotate the handle - it clins. This situation is not uncommon, but it is possible only at the doors opening in 2 planes.

Lock protects the shut-off mechanism from further manipulations with the handle open door - If you turn the handle in the open sash to the "ventilation" position, you can deal with all the accessories.

The locking mechanism is attached on the door of the door immediately under the handle mechanism (a number of manufacturers are released with a block with a block at the bottom of the door canvase). It may have different species and the method of removing the blockade from the handle, which is perfectly visible on the photo above.

Fittings "Maco" need to click on the latch and move it to the "vertically down" position, after which the position of the handle. The rest of the manufacturers of the accessories have enough blocker tongue holding the handle, press the door to the door and also turn the door handle.

It is difficult to turn. The problem of a tight turning handle arises in one case - a long time was not carried out preventive care for accessories. Due to the accumulated mud, shut-off planks move with difficulty. Repair is simple - it is enough to clean the fittings, and then lubricate all the parts made of metal. The process of lubrication of fittings can be found in the work: "" - it is the same as eurochana.

IMPORTANT: If the handle is hardly rotated with a tightly pressed to the door of the door, the problem is in pin and the team. Repair is simple - or translate the trough in the summer mode, or under the retaliatory slats to put thin, not the thickness of 1 mm gasket.

Click

The simplest type of adjustment is to install the pressure of the door clock to the box. During installation of the door, installers set a standard (medium) option to fit the sealing rubber to each other. Over time, they wear out and the balance is broken. You can adjust the clashes of the balcony door 2 ways: Rotate the axle bargains or adjust the response bar (euro does not have such a possibility).

Tsazfu (Eccentric) can be found on the door ends:

• two or three on the front side;
• one or two on the rear;
• 1 - at the top and bottom (if the mechanism is installed for folding).

At various manufacturers, it has a different look, which is perfectly seen in the photo:

• eccentric shut-off, regulates pressing force - first in the photo;
• anti-burglar shut-off eccentric with adjustable clamping force - medium;
• the locking anti-burglar eccentric (regulates the height of the lift of the hook and the strength of the clips) - the third one.

The pin may be in 3 positions:

• neutral or standard, with medium clamping force;
• summer - pressing weak;
• winter - pressing the maximum strong.

You can determine the strength of the clamp by the mark on the eccentric or its position. The oval vertical position means weak clamp (translated for the summer), at an angle - standard, horizontal - strong (winter period). Round eccentric has risk. If she is turned to the street - the summer climb, in the apartment - winter, up - medium.

Change the position of the pin can be a hexagon (furniture key) or passatages. Sometimes to carry out an eccentric adjustment you need to pull on yourself. Passatia (wrench) will be required for the production of Maso, where oval eccentrics.

The mechanisms of "ROTO" fittings are regulated by the furniture key. Some models of fittings of the balcony doors have the ability to adjust the clamp through the response bar. To do this, it has an adjusting screw for a hex key (see photo, option "A"). Turn around the clock arrows enhances clamps, against - weakens.

Change the strength of the adjustment of the top corner of the door in the area of \u200b\u200bthe loop can also with the adjusting screw on the folding scissors. To do this, the door sash must be opened immediately in two positions. Initially, it swallows, after which the latch of the block is pressed against the accessories, and the handle is translated into the "ventilation" position. After that, the door is slightly covered and folded.

On the plate of scissors there is an adjusting bolt under the furniture key (see photo). Spinning it, the clamping force increases, twisting - weaken.

When sagging

Elimination of the problem clinging behind the door threshold is carried out using adjusting screws in each loop that are responsible for changing the position of the horizontal door. At the same time, we note that the sash with two opening modes is placed 2 loops, and with one 3. Therefore, with three loops, adjustment must be performed on each of them.

To eliminate malfunction, it is necessary to raise the bottom, opposite to the upper loop, an angle. To do this, the top of the door will be fed to the loop, and the bottom, on the contrary, is pressed from it. If necessary, the sash can be slightly lifted.

Works are performed in the following sequence:

• the door opens for 90 o (it is possible and a smaller angle, but it is quite difficult to adjust in this case);
• hex key to twist the adjusting screw for 2 turns;
• on the middle loop, tighten the screw on half of the turnover;
• on the loop at the bottom of the door of the screw to unscrew by one turn (against the arrows of the clock);

• close the door and see the position of the lower angle, as well as the position of the hooks in relation to the response.

If the door is still clinging to the threshold, the adjustment process needs to be continued, but the number of revolutions to reduce. Often, after leveling the door, the hooking bargains or do not fit on with the Range, or do not fix the door. In this case, the response plank is rearranged. The problem can be solved and lifting the door leaf up.

For this, the screw located in the bottom loop (responsible for the vertical) must be twisted along the clock. To have access to it, you need to remove decorative elements loops. The hex key is inserted into the loop itself from above.

ATTENTION: REHAU and VEKA firms are different door hinges. To configure them, you need a different tool. But the technology adjustment is the same.

When taking the middle part

And now let's look at how to adjust the balcony door if it hurts the box with the middle part. Step-by-step order The following works: Horizontal adjustment screws The door sash moves towards the loops. First you need to tighten in the bottom loop area, then the top.

Here is the opposite problem: the hooks do not get to the gaps in the retak planks. In this case, with the help of horizontal adjusting screws, the occlusion of the shut-off bargains in the grooves of the response plate on the front side of the door. From the rear, you can:

• eliminate the deformation of the door leaf with a gasket between the double-glazed and doors profile;
• in a new way, set up the response planks for the hooks - to put plastic linings for them.

How to translate the balcony door from one mode to another

Balcony doors like plastic windows, you must regulate twice a year for the press. Unfortunately, the overwhelming majority owners forget about it.

On winter mode

Nothing difficult in how to adjust the balcony door plastic for the winter, no:

1. open the door;
2. we inspect her ends from all sides - the location of the eccentrics are determined;
3. furniture key (passatizing) All eccentrics are translated into winter mode. Oval in a horizontal position, round marker towards the room.

If everything is done correctly, during the cold weather will not blow all the gaps and holes.

On summer mode

With the onset of heat, clamping seals must be loosen. Otherwise, they are rapidly wear out. For this, the open doors are adjusted by pin. They must be installed on the "summer mode" - oval vertically, round mark towards the street.

Preventive balcony door maintenance

So that plastic doors serve for a long time and did not create problems with their owners, they must be regularly at the beginning of winter and summer:

• Clear dirt, then wash. Initially plastic washes (door frame and door leaf), then double-glazed windows. Wash the balcony door is necessary with the external, and from the inside. In detergent solutions there should be no aggressive chemistry (acids and alkalis) and abrasives. For glass apply a variety of coined formulations homemade cooking or purchased in the store ("Sing Super", "Synergetic" and other) wipe plastic parts better with a soft cloth or a sponge, and a glass with special napkins or rubber scraper;
• Wash, dry, and then lubricate sealing gum and metal parts of the shut-off reinforcement;
• Adjust the eccentrics under the upcoming season.

Conclusion

The problems arising during the operation of the balcony door are eliminated mainly by various kinds of adjustments:

• bad clamp seals is eliminated by adjusting the RACF;
• the conductive door is raised by horizontal adjusting screws;
• raise the door without changing the location of the corners relative to the box, can be screw inside the lower canopy;
• the door profile deformation is cleaned by the side gasket under the glass package, the box - installation of the laying under the retaliatory planks.

Video on the topic

Plastic doors are widely used in homes, apartments, offices and shops: they are used as balcony, interior, input. This is an excellent alternative wooden doors, and such products are better protected from noise, dust, have big reserve Strength. Over time, it may be necessary to adjust the plastic doors. , which is not difficult to do on your own.

When is the adjustment required?

Even if you did not save on quality and purchased a dear from the proven manufacturer, this does not mean that in a few years it will not be necessary to adjust the door. This problem is connected with many factors:

• Shrinking building.
• Incorrect installation.
• Incorrect operation.
• Sailing design from its own weight.

In order to know exactly how to adjust , you can watch the installers. Over time, this skill can be useful.

About what is required to adjust the doors, you can find out if there are drafts, the door began to open or closed, stopped being parallel to the box. To determine how densely the design is fit, you can use a regular sheet of paper to be placed between the door frame and the frame itself. With hermetic closure, stretch the sheet will not work. If it comes out easily or falls out, then the adherence in this place is weak.

The sash could move due to frequent temperature differences, weakening the door mechanism, because of which it begins to touch the frame elements. Adjust the plastic door is necessary in that situation if it hits the threshold when opening it. When tuning, look at the handle: it can hang out, depart from the socket, also require the setting. The canvas may be loosened to the frame and due to the wear of the seal, which will be required to be replaced.

Having defined a malfunction, you will understand what kind of plastic door adjustment is independent; Instructions for all actions are easy and accessible to any owner. You can adjust in three directions, for this you need to prepare the tools in advance. We need two screwdrivers: flat and cross, hexagon, tape measure, plastic strips, pliers.

Properly adjusted door must be stable in any position.

Vertical setting

The loop adjustment occurs with a special screw that is on them. With its rotation, the door will fall or climb. Such a method is used if the sash hits the threshold or the seal in the lower or the upper part has a dent.

Before starting work, you will need to remove the plug with the adjustment screw, which is located on the bottom loop. It is located along its axis. You can rotate with a hexagon. When the mechanism is rotated clockwise, a rise will occur in the opposite direction - lowering the web.

Setting the plastic balcony height

Horizontal setting

This type of setting is needed if the cloth has resulted. Most often this is due to the large mass of the design. Adjusting the plastic door in height occurs when the sash is open. To do this, unscrew the screws from the upper loops, after it is required to close the sash, remove the lining on the loops, covering screws for adjustment. The setting takes place using the longest fastener element located in a horizontal position.

If there is a skew, you will need to pull this screw on the upper and central loops; The one that is located above should be kept stronger. If you do not know how to pull the balcony plastic door so that it gets up smoothly, relax all horizontal screws and adjust them together.

Adjusting the door leaf horizontally in the upper loop
Horizontal door adjustment in the bottom loop

Debugging

It is necessary to know not only how to adjust the plastic balcony door independently , but when you want to do it. For example, clash must be controlled constantly, and not only when you notice the problem. IN summer time Plastic expands due to high temperatures, so the clash must be loosen, in winter, on the contrary, it must be enhanced to eliminate drafts, as the extension will cease to occur. The device of the plastic door to the balcony is quite simple, so only the hex key will need to work. Find a locking type axle. On this design element there is a special notch that will help determine the degree of pressure density. Rotate serifs to the frame will provide a weakening in the opposite direction - gain.

If the position of the screws serving to adjust, extremely, this setting will not be effective. In this case, you will have to resort to debugging the position of the glass package. Pull the strokes that fix it, install gaskets in the right places, you can do it with a special device - blades. From the skew will be able to get rid of the right place for laying and taking into account its thickness. After this stroke can be returned to the place.

Adjusting the climate clamping

Replacing the seal

If the adjustment of plastic doors was not independently carried out for quite a long time, and the door was operated with distortion, often the noticeable deformation of the sealing material happens. It will be necessary to change: buy a new one in the construction store. Pay attention to the form and cross section of the acquired material - they must coincide with the old.

You can remove the sealer from the groove from the groove, using a flat screwdriver. Remove contaminants, glue growths, apply a new layer, insert the fresh seal in such a way that it does not stretch and not provis.

Debugging of the state of the handle

These products can break out or, on the contrary, turn a tight, not allowing the door to open normally. In the first case, the adjustment of the inlet plastic door is carried out with the help of screws located on the handle. To do this, you need to remove the protective pad, tightening them with a screwdriver.

The second version of the problem will require other efforts. To eliminate the problem, you will need to adjust the door leaf. How to adjust loops on plastic doors , described above. If you put the web correctly, but the handle defect does not disappear, it will be necessary to replace it. It is easy to do: you need to unscrew two screws that keep the product, pull out the handle, put a new one and fasten the screws into place instead.

Adjusting the knob

• In order to protect the door from damage and get rid of the need for frequent adjustment, you can install the opening limiter. This device will protect the loop from breaking, as it will not give them to touch the door jamb.
• Another useful device is microlift. He takes on the weight of the door canvase in the closed position and does not give it to be saved.
• To extend the service life of the seal, it needs to be treated with silicone lubricant.
• It is impossible to hang anything on the door handle.
• All parts of the opening mechanism must be regularly lubricated

Compliance with these uncomplicated rules will extend the service life of the door, avoiding frequent adjustments.

The installed plastic structures of balcony blocks provide a warranty. After this period, the Master's call becomes paid. Therefore, you can find out the cause of the fault and eliminate it.

The quality of the installed door and the need for its adjustment

The windows and doors of the residential apartment, office or technical room should be sealed, provide good clamp, protect against noise and cold. If some of these functions is broken, then the design should be inspecting for breakdown.

If the balcony door is installed correctly, it will last longer and will meet the following requirements:

• the absence of gaps between the web and the profile throughout the perimeter in the closed state of the structure;
• the sash after the clutch is not shifted vertically to the right or left;
• it remains in the open position, and not open and closes back.

Note! In modern residential complexes, new balcony blocks and plastic windows can stop working properly due to the shrinkage of the house. Manufacturers of metal-plastic structures advise residents of new buildings more often to pay attention to even chalk malfunctions in such systems.

If the design of the design or its components calls questions, you can make sure that the system is working in several ways. To do this, open the door to the balcony, apply a paper sheet to the frame and closed the sash tightly. Sheet pull over. Such actions are repeated throughout the perimeter of the canvas. Paper should be pulled out at any point of the clamp. In a place where less effort was required, a larger gap was formed.

The vertical position of the web relative to the installed profile can be checked using a simple pencil. For this, graphite is delineated by a closed sash. If you open the door, then after the press you can immediately notice the deviation of the contour from the parallel position relative to the frame. In such ways, you can detect problems in advance and prevent a serious breakdown.

Types of adjustments and necessary tools

All accessories and fastening of balcony structures are made in several varieties and are characterized by the same device. Therefore, the adjustment of the plastic balcony doors is performed using the same tools:

1. hammer and pliers;
2. set of tap with flat and cruciform edge;
3. hexagoned M-shaped keys;
4. key "Star";
5. construction roulette;
6. plastic seals.

After determining the faults of the plastic balcony door, choose the method of its adjustment. Work can be performed with your own hands in different directions of the planes: in the mode of the vertical movement of the sash, adjusting the horizontal position of the web, in the front direction or performing additional prevention of the elements.

Horizontal adjustment

To adjust the door of the door, it is opened "until the stop" to get free access to hinges. Under their linings, adjusting screws with hexagon heads are located. M-shaped key number 4 is inserted into these holes and rotates along or counterclockwise:

• performing turns to the right, the door is attracted to the hinges;
• in the case of reverse stroke, the canvas is removed from the canopy.

Such adjustment with your own hands allows you to get an additional 2 mm to eliminate the skew or rubbing the design. In some blocks, access to the upper loop opens only when the sash is removed to the "ventilation" position. Thanks to this method, you can adjust the plastic balcony door, so and perform the prevention of the operation of the clamps. Having finished the manipulation, the cloth first need to return to the initial position, and then check the work.

Master Council! If you remove outdoor scenery with loops, you can get more convenient access to hex retainers. In this case, adjust the medium and top loop to raise the far corner. The lower and medium loop is set to adjust the near edge.

Vertical adjustment

The lower canopy is responsible for the vertical functioning of the structure. To do this, the outer decoration is removed from the loops and the vertical hex screw is adjustable. Rotation to the right can be lifted by the canvas, and turns to the left will help omit the item into several millimeters.

The deviation of the door is regulated by their own hands using the upper and lower canopies. For this, it is fully opened. From the end there is a fixing "tongue", responsible for the position of the sash. He pressed with his finger and turn the handle to the ventilation. At the end of the work, a tight fit of the door is performed, and the handle returns to the original "open" position.

Frontal set

This type of work is carried out to restore the desired gap between the sash and the frame. You can perform adjustment in two ways:

• with the help of eccentrics (pin);
• using the door clamping mechanism.

In the first case, the position of the eccentrics by turning is changed. If you turn the element to the outside of the room, the door will be transferred to the "winter mode" and it will be more dense to the frame. In the case of inverse movement, the "summer" door position is provided with a less severe seal to the base and large gaps.

Be careful! All trumps should be in the same position. Otherwise, the device has disk.

Alone, these manipulations can be carried out manually, pulling away and turning the mechanism. Either use pliers and a special key. As a result, the door can move almost 1 cm in the front direction. It will save heat insulating properties Constructions in the event of a seal shrinkage.

Additional maintenance of working mechanisms

To ensure comfortable use of the whole design, the accessories and mechanisms are inspected. If the handle is broken, then work in such a sequence:

• you can independently turn the decorative lining;
• unscrew the screws and remove the handle;
• restore broken items;
• run back assembly.

Periodically lubricate the accessories and moving elements, tighten with their own hands weakened mountings, adjust the moving parts of the structure.

The presence of a compressed sealer testifies to the savings of the door. The place where the gasket wish, indicates the displacement of the canvas in a certain side. The reason for repair is the dense move of the rotary handle. Adjusting the door will be required even if the handle clings the elements of the fittings.

For the winter you need not only to warm the windows and walls, but also think about the doors, whether they are input or even just balcony. The article contains instructions, as without a wizard, determine the problems of the plastic design and independently perform the desired adjustment.

Main problems of balcony doors and their causes

As soon as experts set the door from plastic, they immediately regulate it. To make sure the masters did their job on conscience, pay attention to such moments:

1. The door frame is tight pressed to the box in all places.
2. The door opens without effort and also closes. If it creaks - it means, the work is made poorly.
3. The design is not shifted vertically. You can check it with a construction level.
4. Door does not sag. Check it will help an easy test. Taking a pencil, circle a closed cloth over the entire area, and then compare the resulting lines with the frame. If they are parallel - the setup works were carried out qualitatively.
5. If the door open by half remains still - it means that it is adjusted correctly.

Attention! Make sure that during this check in the room there was no draft, from which even a well-established door closes by itself.

Over time, the design is wearing, and then you need to make additional correction. Most often it is required in such cases:

1. A part of the bottom of the novel hurt the threshold - a sign that the door has saved under its weight. The main mass is accounted for on the glass, so if it is double, then the loops become more weak, and the sash - shifts.
2. Steel doorhandle. It is easier to eliminate this problem. Rotate the punch with the knob and twist the screws using a screwdriver.
3. The sash hurts the frame in the center - this suggests that its lateral side is shifted. This sometimes happens because of frequent temperature differences. Especially the influence of weather conditions are subject to doors that lead to a not glazed balcony.
4. Weakened door door.

Council. If the door requires additional regulation, contact the firm that was engaged in installing the door. Independently work only if the warranty period has expired on a plastic design.

How to diagnose a weak clamping density

As required, such signs are evidenced by:

• The canvas is pressed against the frame is not very carefully. It feels that air goes from under the sealer.
• The door closes tight enough, you need to apply more effort than usual.

Attention! If you do not eliminate this defect, then the in the winter will walk drafts.

To determine the need for regulation will help such an experiment:

1. Take a paper sheet.
2. Place it between the frame and the door box.
3. Close the door tightly.
4. Pull the sheet per edge, remembering, whether it is easy with you.
5. Repeat the procedure at all construction sites.

If every time you have to apply approximately the same effort - it means everything is in order. If it was more difficult to pull out the paper somewhere, and somewhere - easier, take up by setting up.

Council. For self-establishment of a plastic door mechanism, we pour into several types of screwdriver, the keys of different diameters with 6th edges, pliers and a set of pads.

Adjustment Instructions

1. Correct the door fit density by rotating the key and pliers special details - eccentrics. They are located in the end of the canvas, usually in 3 places: at the top, in the center and below. You can see how these parts of the mechanism on the video or photo look like.
2. Rotate the little one eccentric, checking how much the clamp has changed. So you will pick up optimal option And adjust the density, but only in the area of \u200b\u200bthe door handle.
3. To ensure complete tightness of the plastic structure, make the setup and the loops. For this and at the top, and at the bottom turn each third adjusting screw. It is convenient to use a hexagon key for this purpose.

Council. Engage in adjusting the clamp twice a year, making it in the summer and for the winter. When it is cold on the street, make the fit density is stronger, and at warm time weaken it. Leave "Winter" setting for the summer is not recommended, since the seal, and the mechanism of the door block is much faster.

Door adjustment if it saves

To eliminate this defect, you can not remove the door leaf with the loops:

1. Opening the doors, find the screw on the top canopy, which opens with a hex key or a special - "asterisk" (depends on the model of the plastic structure itself).
2. Turn the screw to a couple of revolutions to the right.
3. If the sash still hits the threshold, remove the protective cap from the bottom loop.
4. Find the adjusting screw and also turn to the right.

If the door hits the frame in the middle, follow these steps:

1. Turn the lower screw to the regulation, which is located on the side, from the inside. Enough 2-3 turnover. So you move the sash to the loop.
2. If the door is badly closed, repeat the procedure, but already on the top canopy.

Horizontal adjustment. Step by step description

Sometimes there is a need to adjust the position of the door, for example, to shift it slightly to the right or left. For this:

1. Open the door and unscrew the screws from the upper canopies. Use a screwdriver with 6 faces.
2. By closing the door, remove the lining, which are hidden screws for debugging the mechanism.
3. Twink them: in the upper loop is stronger, in the bottom - just weaker. So you will not allow the skew of the design.
4. If you need to evenly move the door to the canopies or, on the contrary, from them, remove the lining from the bottom loop.
5. Tighten it and loosen all the screws that are located in the canopy horizontally.

Attention! Turning the screws clockwise, you will shift the door to the hinges, making rotation counterclockwise, slightly move the web in the opposite direction. So you can adjust the design of the design within 2 mm.

Vertical adjustment. Instrupture

If the door needs to be slightly omitted or lift - make a vertical debugging of the mechanism.

1. Find the screw to regulate at the bottom of the end of the carport. It is located along the loop axis. Sometimes a screw is hidden by a stub that needs to be removed.
2. Rotate the adjusting screw to the right if the door must be lifted, and left - if you lower. To do this, the hex screwdriver is suitable again, and the height of the lifting height is also possible up to 2 mm.

Council. To engage in adjusting the door I had to do not so often, set it the opening and microlift limiter, which supports the web when it is closed, and does not allow sagging.

Adjusting the balcony door: video