This smartphone is one of the most reliable. It is positively characterized by users for ergonomics, long battery life and stable performance. However, in practice, there are times when the ZTE Blade A510 does not turn on. The reasons why such a malfunction has occurred can be completely different. Therefore, if there are problems with starting a smartphone, it is better to immediately contact our service center, where qualified specialists trained to repair ZTE mobile equipment will conduct free diagnostics and perform the necessary work.

Price:

Why ZTE Blade A510 does not turn on and what to do in this case

At home, you can eliminate two causes of malfunction due to which the ZTE Blade A510 may stop turning on. The first is a software glitch. In such a situation, it is enough to wait a few minutes and try to turn it on again. A reboot made in this way helps in some cases.

The second possible reason, which is easy to fix at home, is problems with the charger connector. In such a situation, the phone may be discharged, and due to a malfunction of the connector, charging does not occur. Therefore, you need to try to change the connector, and if charging starts, then the problem is solved. If the ZTE Blade A510 went out and stopped turning on, the instructions and DIY repairs outlined above did not help, you should contact our service center. Our employees know exactly what to do in such cases and will provide qualified assistance.

• the battery is very low (in some cases it can only be charged at a service center);
• oxidation of the phone contacts due to ingress of water (they will be dried and cleaned in the service center, which will lead to the restoration of the phone's performance);
• short circuit inside the board (most likely, it will need to be replaced);
• mechanical damage to the case and board (it is necessary to diagnose the phone and determine the repair procedure);
• the power button or its loop is out of order (the necessary spare parts can be replaced at the service center).

Benefits of our service center

In our authorized service center, you can get fast and high-quality service at a favorable price. This is achieved through cooperation with reliable suppliers - manufacturers of components and spare parts for phones. In addition, a wide range of products in our service center saves the client's time.

About us

The quality of our employees' work is confirmed by a guarantee certificate for up to 1 year. Also, our distinguishing feature is a long period of work in the market, unique experience and a positive reputation.



Even in modern balanced Android smartphones from well-known manufacturers, sometimes there is a situation that characterizes software developers for the device from a not very good side. Quite often, even a relatively “fresh” smartphone can cause trouble for its owner in the form of a crash of the Android system, which makes it impossible to continue using the device. ZTE Blade A510 is a mid-level device, which, with good technical characteristics, cannot, unfortunately, boast of the stability and reliability of system software from the manufacturer.

Fortunately, the above-described troubles are eliminated by flashing the device, which today is not particularly difficult even for a novice user. The material below describes how to flash a ZTE Blade A510 smartphone - from a simple installation / update of the official version of the system to getting the latest Android 7 in the device.

Please be aware of the following before proceeding with the instructions below.

Sewing procedures are potentially dangerous! Only strict adherence to instructions can predetermine the uninterrupted flow of software installation processes. At the same time, the administration of the resource and the author of the article cannot guarantee the efficiency of the methods for each specific device! The owner performs all manipulations with the device at his own peril and risk, and he bears responsibility for their consequences himself!

Any software installation process is preceded by preparatory procedures. In any case, to be on the safe side, do all of the following before starting overwriting the ZTE Blade A510 memory partitions.

Hardware revisions

The ZTE Blade A510 comes in two versions, the difference between which lies in the type of display used.

Rev1- hx8394 f _720p_lead_dsi_vdo

For this version of the smartphone there are no restrictions on the use of software versions, you can install any official OS from ZTE.

Rev2- hx8394 d _720p_lead_dsi_vdo

In this version of the display, only official firmware versions will function properly. RU_B04, RU_B05, BY_B07, BY_B08.

You can find out which display is used in a particular device using the Device Info HW Android application, which is available in the Play Store.

After installing and launching Device Info HW, as well as providing the application with root rights, the display version can be viewed in the line "Display" in the tab "General" main screen of the program.

As you can see, determining the type of display for the ZTE Blade A510 and, accordingly, the hardware revision of the device is a simple procedure, but it requires Superuser rights on the device, and obtaining them requires preliminary installation of a modified recovery, which is done after a number of rather complex manipulations with the software part and will be described below.

Thus, in some situations, you will have to act "blindly", not knowing for certain what type of display is used in the device. Before the revision of the smartphone is found out, you should use only those firmware that works with both revisions, that is RU_B04, RU_B05, BY_B07, BY_B08.

Drivers

As in the case with other Android devices, in order to manipulate the ZTE Blade A510 through Windows applications, you will need drivers installed in the system. The smartphone in question does not stand out in this matter with something special. Install drivers for Mediatek devices by following the instructions from the article:

If you encounter problems or difficulties while installing the drivers, use a specially created script to install the system components required to properly pair your smartphone and PC.

Back up important data

Each intervention in the software part of all Android devices, and the ZTE Blade A510 is no exception here, carries a potential danger and in most cases means clearing the internal memory of the device from the data it contains, including user information. To avoid the loss of personal information, make a backup copy of important information, and in the ideal case, a full backup of the smartphone's memory sections, using the advice from the material:

The most important point to pay attention to is backing up the partition "NVRAM"... Damage to this area during flashing leads to the erasure of IMEI, which in turn leads to the inoperability of SIM cards.

Recovery "NVRAM" It is very difficult without a backup, therefore, in the description of software installation methods No. 2-3, below in the article there are steps that allow you to create a partition dump before interfering with the device's memory.

Firmware

Depending on your goal, you can use one of several methods to overwrite the ZTE Blade A510 software. Method # 1 is most often used to update the official firmware version, Method # 2 is the most universal and radical method of reinstalling the software and restoring the device's working condition, and Method # 3 involves replacing the smartphone's system software with third-party solutions.

Method 1: Factory recovery

Probably the easiest way to reinstall the firmware on a ZTE Blade A510 is to use the capabilities of the device's factory recovery environment. If the smartphone is booted into Android, even a PC is not required to follow the instructions below, and if the device does not work correctly, the steps listed above often help to restore functionality.

Additionally. In the event that any errors occur during the installation process or you are prompted to reboot, as in the photo below, just repeat the procedure again from step 1, after restarting the recovery.

Method 2: SP Flash Tool

The most effective method for flashing MTK devices is to use the proprietary development of Mediatek programmers, fortunately, available to ordinary users - the SP Flash Tool. As for the ZTE Blade A510, using the tool, you can not only reinstall the firmware completely or change its version, but also restore the device that does not start, hangs on the boot saver, etc.

Among other things, the ability to work with the SP Flash Tool will be needed to install custom recovery and modified OSs in the ZTE Blade A510, so you will get acquainted with the instructions, and ideally, it is definitely worth it, regardless of the purpose of the firmware. The version of the program from the example below can be downloaded from the link:

The model in question is very sensitive to stitching procedures and quite often during the manipulation various failures occur, as well as damage to the section "NVRAM", therefore, only strict adherence to the instructions below can guarantee the success of the installation!

Before proceeding to the process of installing the system software in the ZTE Blade A510, it is recommended that you read the article at the link below, this will help you more fully understand the picture of what is happening and better navigate in terms.

The example uses firmware RU_BLADE_A510V1.0.0B05, as the most versatile and fresh solution for models and the first and second hardware revisions. The package with the firmware intended for installation via SP FlashTool can be downloaded from the link:

1. Run flash_tool.exe from the directory resulting from unpacking the archive.



2. Load into the program MT6735M_Android_scatter.txt- this is the file that is present in the directory with the unpacked firmware. To add a file, use the button "Choose" located to the right of the field. By clicking it, determine the location of the file through Explorer and click "Open".



3. Now you need to create a dump of the memory area occupied by the section "NVRAM"... Go to the tab "Readback" and press "Add", which will lead to the appearance of a line in the main field of the window.



4. Left-clicking on the added line will open the Explorer window, in which you must specify the path where the dump will be saved, as well as its name - "NVRAM"... Next press "Save".



5. In the window "Readback block start address", which will appear after the execution of the previous step of the instruction, enter the following values:
   • In field "Start Address"- 0x380000;
   • In field "Length"- value 0x500000.

   And push "OK".



6. Push the button "Readback"... Turn off the smartphone completely and connect the USB cable to the device.



7. The process of reading information from the device's memory will start automatically and will end very quickly with the appearance of a window "Readback OK".



8. Thus, you will have a 5MB backup file for the NVRAM partition, which you will need not only in the next steps of this manual, but also in the future if you need to restore IMEI.
9. Disconnect the phone from the YUSB port and go to the tab "Download"... Uncheck the checkbox next to the item "Preloader" and start the process of writing images to memory by pressing "Download".



10. Connect the USB cable to your smartphone. Following the definition of the device, the system will automatically start installing the firmware into the device.



11. Wait for the window to appear "Download OK" and unplug your ZTE Blade A510 from your computer's USB port.



12. Uncheck the checkboxes in front of all sections, and near "Preloader" on the contrary, check the box.



13. Go to the tab "Format", turn the formatting switch to "Manual FormatFlash", and then fill in the fields of the bottom area with the following data:
    • 0x380000 - in the field "Begin Address";
    • 0x500000 - in the field " Format Length ".



14. Push "Start", connect the device in the off state to the YUSB port and wait for the window to appear "Format OK".



15. Now you need to record a previously saved dump "NVRAM" in memory of ZTE Blade A510. This is done using the tab "Write memory", available only in the "advanced" mode of SP FlashTool. To go to "Advanced Mode" you need to press the combination on the keyboard "Ctrl"+"Alt"+"V"... Then go to the menu "Window" and choose "Write memory".



16. Field "Begin Address" in the tab "Write memory" fill in by entering 0x380000, and in the field "File Path" add a file "NVRAM", obtained as a result of performing steps No. 3-7 of this instruction. Push the button "Write memory".



17. Turned off ZTE Blade A510 connect to a PC, and then wait for the window to appear "Write Memory OK".

    

18. This completes the OS installation in ZTE Blade A510. Disconnect the device from the PC and turn it on by long pressing the key "Nutrition"... The first time after manipulations through Flashstool, it will take about 10 minutes to wait for the download to Android, be patient.

Method 3: Custom firmware

If the official firmware ZTE Blade A510 does not suit you with its functional content and capabilities, you want to try something new and interesting, then you can use modified solutions. For the model in question, a lot of custom has been created and ported, choose any according to your preferences, but it should be borne in mind that often developers post firmware with non-working hardware components.

The most common "disease" of modified solutions for ZTE Blade A510 is the inability to use a camera with a flash. In addition, one should not forget about the two revisions of the smartphone and carefully read the description of the custom, namely, which hardware version of the A510 it is intended for.

Custom firmware for the A510 is distributed in two forms - for installation through the SP Flash Tool and for installation through a modified recovery. In general, if a decision is made to switch to custom, it is recommended to follow this algorithm. Flash TeamWin Recovery (TWRP) first, get root rights and find out the hardware revision for sure. Then install the modified OS via FlashTool without a recovery environment. Subsequently, change the firmware using custom recovery.

Installing TWRP and getting root rights

In order for the ZTE Blade A510 to have a custom recovery environment, use the method of installing a separate image using SP FlashTool.

The image file of the modified recovery can be downloaded from the link:

Installing custom via SP FlashTool

The procedure for installing custom firmware as a whole is no different from the same process when installing an official solution. If you transferred the files of the official firmware using the method number 2 above (and it is highly recommended to do this before installing the modified solution), then you already have a backup "NVRAM", which means that after installing any modified OS, if necessary, you can restore the partition.

As an example, we will install a custom solution in the ZTE Blade A510 Lineage Os 14.1 based on Android 7.1. The disadvantages of the assembly include the periodic freezing of the "Camera" application, if the flash is turned on. Otherwise, this is an excellent and stable solution, besides, it is the newest Android. The package is suitable for both revisions of the device.

Installing custom via TWRP

Installing modified firmware via TWRP is very easy. The detailed procedure is described in the material at the link below, for ZTE Blade A510 there are no significant differences in the process.

One of the interesting solutions for the device in question is the ported OS MIUI 8, which is characterized by a nice interface, a lot of possibilities for fine-tuning the system, stability and access to Xiaomi services.

You can download the package for installation via TWRP from the example below at the link (suitable for both Rev1 and Rev2):

Thus, for ZTE Blade A510, there are several methods for installing the system software, which are used depending on the desired result. If something goes wrong while installing the system on your smartphone, don't worry. If there is a backup, restoring the smartphone to its original state via the SP Flash Tool takes 10-15 minutes.

The ZTE phone does not work that make

After some use of the ZTE office phone, I encountered some discrepancies, my phone did not cut in and the detector was pressed for itself, I solved these problems and will tell you about it in the article. ZTE is one of the most recognized phone and telecommunications equipment companies in China. In general, in the international market, the phones of this manufacturer have received recognition from many users. Zte Blade A510 firmware does not turn on after -. But, despite such popularity and the fact that the quality of devices of mobile gadgets in the Celestial Empire is trying to improve every year, the problem of low-quality assembly remains vital.

This is how a ZTE phone looks when disassembled. We made sure that the ZTE Blade is charging, but still does not turn on, refusing to start. If the phone does not turn on after what to do if the iPhone is strong. Here, the power connector is being repaired, due to the problems with which the phone is denied to be charged and, accordingly, hacked.

Ultimately, about 20% of the users who purchased this accessory complain about the poor performance of the battery and the tasks of recharging the phone. Others write about ZTE bugs. Such failures take place for this accessory not without a trace and, as a result, turn it into a so-called "brick" - in other words, into a phone that refuses to work at all. can I turn on without the bottom board? zte blade l2 the child broke the socket the phone is charged but does not turn on, please, what to do ???. Therefore, the article will examine the prerequisites for which the ZTE phone is not cut in, and the main methods of solving this obstacle will also be analyzed.

What are the reasons for ZTE phone failure

All obstacles, in general, with any kind of computer (electronic computer), can be conditionally divided into two categories.

• Hardware - failure of certain devices of the device;
• Software - malfunctions in the software of the accessory.

This also applies to ZTE. What to do if ZTE Blade A510 won't turn on. In more detail, the main hardware prerequisites for which this phone model stops working are related:

• With the failure of the power connector or power controller. This problem is found in almost all ZTE phones, but it is especially expressed in the economical models of this phone;
• In addition, the devices of this company have another nasty feature - the highest probability of overheating;
• Falling or falling into water can also result in a fatal malfunction of the phone.

Among the software errors are:

• Critical system crash when updating the phone's firmware (software) version;
• A virus attack, the result of which is the corruption of system files responsible for downloading and operating the phone.

Not turns on ZTE, ZTE does not charge

KOPEECHKU FOR CHANNEL DEVELOPMENT - This is a video after a live broadcast on.

ZTE Blade X5 Diagnostics, repairs do not turn on.

Therefore, the main methods for solving the problem will be listed below. turn on the phone ZTE.

Hard-reset is the only, for today, software method to bring the phone into working condition in this case, if he refuses to cut it at all. We will talk about this method below.

How to fix the problem turn on the phone ZTE

So, there is a subsequent effective method for independently solving this issue to turn on the ZTE phone. iPhone does not turn on black screen what to do. It is based on the so-called "Hard Reset", in other words, the complete removal of all user data on the phone, also resetting all options to industrial on it. This procedure helps to fix an unlimited number of software errors, so it is worth trying this method. zte blade a510. Blackened What to do if the phone does not turn on? The tablet does not turn on. LG TV does not turn on and indicator flashes, what to do. To implement it on a ZTE phone, you need:

1. Remove the battery for a few seconds, then insert it back;

This is how one of the ZTE models looks when disassembled. Here you can see how you can remove the battery from your ZTE phone.

Press the volume up button and turn on the phone right away;

When you see the data recovery window and feel the vibration of the device, release both buttons;

To navigate through the Fri menu, use the volume buttons, to prove the act - the power button;

Now, in this window, we need to find the "Wipe Data / Factory Reset" tab and activate it;

This is the phone user data control panel. What to do when iPhone won't turn on? 6s, Re-bonding Glass and iPhone 6s won't charge. To clear all data and reset device options, click on "Wipe Data / Factory Reset" (to prove the choice, click on the power button)

In the next window, we confirm the deletion user data;

Confirmation window for clearing user data. Here we have to click on "Yes- delete all user data"

The procedure for a complete reset of the phone begins, after which the "Hard Reset" menu opens again - in it we activate the "Reboot system now" item.

The final "Hard Reset" window, which is similar to the start one. What to do if the iPhone does not turn on but the apple is on. After the end of the procedure for resetting the smartphone settings to the factory settings and deleting all data, select the "Reboot system now" item to reboot the device.

As a result, the smartphone restarts, after which the device should work.

After using a ZTE phone for some time, I faced some problems, my smartphone did not turn on and, I solved these troubles and in the article I will tell you about it. ZTE is one of the most famous phone and telecommunications equipment companies in China. However, in the international market, the smartphones of this manufacturer have received recognition from a huge number of users. But, despite such popularity and the fact that the quality of components for mobile devices in the Middle Kingdom is trying to improve every year, the problem of low-quality assembly remains relevant.

This is what a ZTE smartphone looks like when disassembled. Here the power connector is being repaired, due to problems with which the smartphone refuses to charge and, accordingly, turn on.

As a result, about 20% of users who have purchased this device complain about poor battery performance and problems with recharging the smartphone. Others write about ZTE bugs. Such failures take place for this device not without a trace and, ultimately, turn it into a so-called "brick" - that is, into a smartphone that refuses to work at all. Therefore, the article will consider the reasons why the ZTE phone does not turn on, and also the main ways to solve this problem will be discussed.

What are the reasons for ZTE phone failure

All problems, in general, with any computer (electronic computer), can be conditionally divided into two categories.

• Hardware - failure of certain components of the device;
• Software - malfunctions in the software of the device.

This also applies to ZTE. In more detail, the main hardware reasons why this smartphone model stops working are related:

• With the failure of the power connector or power controller. This problem is present in many ZTE smartphones, but it is especially pronounced in the budget models of this phone;
• In addition, the devices of this company have another unpleasant feature - a high probability of overheating;
• Falling or falling into the water can also result in a fatal malfunction of the smartphone.

Among the software errors are:

• Critical system failure when updating the firmware (software) version of the smartphone;
• A virus attack, the result of which is the corruption of system files responsible for downloading and operating the phone.

Therefore, below will be listed the main ways to solve the problem of turning on the ZTE phone.

Hard-reset is the only, today, software way to bring the phone into working condition in the event that it refuses to turn on at all. We will talk about this method below.

How To Fix ZTE Phone Power On Problem

So, there is the following effective way to independently resolve this issue to turn on the ZTE smartphone. It is based on the so-called "Hard Reset", that is, the complete removal of all user data on the smartphone, as well as resetting all settings on it to the factory settings. This procedure helps to fix a huge number of software errors, so you should try using this method. To implement it on a ZTE smartphone, you must:

1. Remove the battery for a few seconds, then insert it back;

   This is what one of the ZTE models looks like when disassembled. Here you can see how you can remove the battery from your ZTE phone.

2. Press the volume up key and turn on the phone at the same time;
3. As soon as you see the data recovery window and feel the vibration of the device, release both keys;
4. To navigate through the menu items, use the volume buttons, to confirm the action - the power key;
5. Now, in this window, we need to find the "Wipe Data / Factory Reset" tab and activate it;

   This is the control panel for smartphone user data. To clear all data and reset device settings, click on "Wipe Data / Factory Reset" (to confirm the selection, click on the power button)

6. In the next window, we confirm the deletion of user data;

   Confirmation window for clearing user data. Here we have to click on "Yes- delete all user data"

7. The procedure for a complete reset of the phone begins, after which the "Hard Reset" menu opens again - in it we activate the "Reboot system now" item.

   The final "Hard Reset" window, which is similar to the start one. After the end of the procedure for resetting the smartphone settings to the factory settings and deleting all data, select the "Reboot system now" item to reboot the device.

8. As a result, the smartphone restarts, after which the device should work.

Before this procedure, do not forget to back up the files on the flash card and transfer them to another device. Hard Reset involves deleting absolutely everything that was contained in the phone, including the list of saved phone contacts, call history, SMS and others.

Conclusion

The method described above is the only one today in the event that the problem of turning on the ZTE phone arose as a result of a fatal software error. It is better to entrust the correction of hardware errors to a specialist. However, if you want to try to fix this problem, then these guides on various breakdowns that lead to the failure of the smartphone and how to fix them will be useful for you:

Phone flashing is always a risky business. It would seem that even if you follow the instructions strictly, unforeseen situations may arise, and in this case it is very easy to get a brick instead of a work phone. Therefore, there are several simple rules that it is better not to neglect, so as not to tempt fate.

First, the phone must always be charged more than 50%. Secondly, before flashing, you must make a backup copy of the data (Backup). In this case, you can return the phone to its original state. Having found instructions on any firmware on an authoritative forum, according to which the pioneers have already successfully flashed, do not neglect these points, unless, of course, you are a guru for unlocking and flashing devices. But usually, after an unsuccessful attempt, a long correspondence appears in the forum thread with the one who, so to speak, implemented this method. Therefore, the third simple rule is personal care and strict adherence to instructions.

Even if after the firmware your ZTE V880E does not turn on at all, and it became clear that it is “dead”, this is not a reason to be upset. Below are instructions for restoring a "dead" device.

Recovery instructions for ZTE V880E

• If the phone is still working, and the radio module has not been backed up, then we definitely do Backup QPST. How to do it is described. If ZTE V880E does not turn on and Backup was not done, then IMEI and MAC address will be changed during recovery. As for Wi-Fi, it should work after the radio is restored.
• Download and unpack it into any folders. We also download the Russian modified firmware version 2.3.6.
• We take out the battery, simultaneously hold down the volume "+" and "-" and insert the cable, without releasing the volume, press "on". DFU mode is loaded. The phone is identified as ZTE Handset Diagnostic Interface.
• Launch DFU Tools. On the left side, select all the checkboxes, on the right side, indicate the path to the dump. The jackdaw on the right is not selected. We press the left button below. After completing the process, the smartphone will enter FTM mode by itself. DFU Tools can be closed.
• We reboot the smartphone, now it has Chinese firmware installed.
• In the settings menu, switch to English (gray letter A).
• Install CWM and, as usual, flash to Russian 2.3.6.
• Using QPST, we restore the previously removed Baskup of the radio module on the Restore tab (where the checkbox is not selected). Those who do not have it, then we skip this point.