It is necessary to separate the concept of "does not load" and "does not turn on". In the first case, the firmware will not be loaded, i.e. Android itself. In the second case, the phone itself does not turn on and here the problem can be both hardware and software.

To determine the cause, you should understand what was the root cause (shock, moisture ingress, an attempt to update the firmware, installing applications, etc.). Further, according to the situation, you can act: independently restore the operation of the system (in case of software errors due to applications) or contact the professionals for help at the service center, including replacing damaged components.

We figure out why ZTE does not boot and does not turn on

Under the wording "ZTE does not turn on", users can understand as a really complete lack of smartphone response to pressing the power button (the screen does not respond, the diode does not turn on, there is no vibration), as well as loading the smartphone to the logo and further "stop".

Let's consider the main reasons and try to understand the situation. The cost of repairs depends entirely on the phone model and the cause of the breakdown.

An error

On the screen, a message may pop up about any error with applications or the Android OS itself.

Here you need to act according to the situation and, depending on what error, eliminate it. The decoding of errors can be found on the manufacturer's website or by contacting the technical support of the service center.

If an application error keeps appearing, the phone's flash memory is probably damaged. It will have to be changed. This is done only in service centers, tk. a special tool is required.

As an option to solve the problem of errors and not being able to download ZTE, this is a factory reset. According to the situation: you can do this from under Android itself in Settings, select a reset, or through Hard Reset and load the Recovery menu, where you select Wipe Data. But this is for those who understand what they are doing. We are not responsible for your actions.

Battery and charging problems

If the phone does not respond when turned on, it may indicate a problem with the battery. So, the battery could simply fail. This problem is solved by replacing it. The battery could have lost its former capacity. Or we are talking about a factory marriage.

It also happens that the battery does not charge at all. The matter may be in the charger - you need to buy a new one. Much worse if the power connector or pins have been damaged. In this case, repairs are required.

Mechanical damage

Much could have happened to a ZTE smartphone with mechanical damage. If there was a strong blow, any contacts could come off, even the internal hardware parts are damaged. Therefore, it is better to immediately bring the phone for diagnostics if you see the first symptoms of serious problems.

Screen problems

The screen deserves special attention. Any fall could damage the matrix. As a result, you will have to replace the screen. This can only be done by an experienced master.

System problems

Usually, in case of system problems, we see either a dark screen, or the phone simply slows down. Such problems are solved by reinstalling the system and installing the latest updates. Smartphone software repair specialist will quickly cope with this task. And if the phone is frozen, you need to urgently contact us! Perhaps the phone is just buggy, there is nothing serious about it.

Liquid ingress

As soon as water or other liquid gets under the body of the smartphone, you need to immediately dry the device. Otherwise, it will be destroyed due to decay and oxidation. The machine may need a major refurbishment. You cannot try to charge the device, this can only aggravate the situation. Bring your ZTE, the craftsmen will professionally dry and restore it.

Power button problems

Sometimes the power button breaks. This could happen if dropped, pressed too hard, or used in frosty weather. The problem is solved by replacement.

Solution

If ZTE does not turn on - come to us:

• Diagnostics will be performed right upon contact;
• We will quickly identify the cause of the problem;
• Let's call the cost of the repair;
• Let's get to work.

As a result, you will soon be able to get a fully working ZTE smartphone!

After using a ZTE phone for some time, I faced some problems, my smartphone did not turn on and, I solved these troubles and in the article I will tell you about it. ZTE is one of the most famous phone and telecommunications equipment companies in China. However, in the international market, the smartphones of this manufacturer have received recognition from a huge number of users. But, despite such popularity and the fact that the quality of components for mobile devices in the Middle Kingdom is trying to improve every year, the problem of low-quality assembly remains relevant.

This is what a ZTE smartphone looks like when disassembled. Here the power connector is being repaired, due to problems with which the smartphone refuses to charge and, accordingly, turn on.

As a result, about 20% of users who have purchased this device complain about poor battery performance and problems with recharging the smartphone. Others write about ZTE bugs. Such failures take place for this device not without a trace and, ultimately, turn it into a so-called "brick" - that is, into a smartphone that refuses to work at all. Therefore, the article will consider the reasons why the ZTE phone does not turn on, and also the main ways to solve this problem will be discussed.

What are the reasons for ZTE phone failure

All problems, in general, with any computer (electronic computer), can be conditionally divided into two categories.

• Hardware - failure of certain components of the device;
• Software - malfunctions in the software of the device.

This also applies to ZTE. In more detail, the main hardware reasons why this smartphone model stops working are related:

• With the failure of the power connector or power controller. This problem is present in many ZTE smartphones, but it is especially pronounced in the budget models of this phone;
• In addition, the devices of this company have another unpleasant feature - a high probability of overheating;
• Falling or falling into the water can also result in a fatal malfunction of the smartphone.

Among the software errors are:

• Critical system failure when updating the firmware (software) version of the smartphone;
• A virus attack, the result of which is the corruption of system files responsible for downloading and operating the phone.

Therefore, below will be listed the main ways to solve the problem of turning on the ZTE phone.

Hard-reset is the only, today, software way to bring the phone into working condition in the event that it refuses to turn on at all. We will talk about this method below.

How To Fix ZTE Phone Power On Problem

So, there is the following effective way to independently resolve this issue to turn on the ZTE smartphone. It is based on the so-called "Hard Reset", that is, the complete removal of all user data on the smartphone, as well as resetting all settings on it to the factory settings. This procedure helps to fix a huge number of software errors, so you should try using this method. To implement it on a ZTE smartphone, you must:

1. Remove the battery for a few seconds, then insert it back;

   This is what one of the ZTE models looks like when disassembled. Here you can see how you can remove the battery from your ZTE phone.

2. Press the volume up key and turn on the phone at the same time;
3. As soon as you see the data recovery window and feel the vibration of the device, release both keys;
4. To navigate through the menu items, use the volume buttons, to confirm the action - the power key;
5. Now, in this window, we need to find the "Wipe Data / Factory Reset" tab and activate it;

   This is the control panel for smartphone user data. To clear all data and reset device settings, click on "Wipe Data / Factory Reset" (to confirm the selection, click on the power button)

6. In the next window, we confirm the deletion of user data;

   Confirmation window for clearing user data. Here we have to click on "Yes- delete all user data"

7. The procedure for a complete reset of the phone begins, after which the "Hard Reset" menu opens again - in it we activate the "Reboot system now" item.

   The final "Hard Reset" window, which is similar to the start one. After the end of the procedure for resetting the smartphone settings to the factory settings and deleting all data, select the "Reboot system now" item to reboot the device.

8. As a result, the smartphone restarts, after which the device should work.

Before this procedure, do not forget to back up the files on the flash card and transfer them to another device. Hard Reset involves deleting absolutely everything that was contained in the phone, including the list of saved phone contacts, call history, SMS and others.

Conclusion

The method described above is the only one today in the event that the problem of turning on the ZTE phone arose as a result of a fatal software error. It is better to entrust the correction of hardware errors to a specialist. However, if you want to try to fix this problem, then these guides on various breakdowns that lead to the failure of the smartphone and how to fix them will be useful for you:

Phone flashing is always a risky business. It would seem that even if you follow the instructions strictly, unforeseen situations may arise, and in this case it is very easy to get a brick instead of a work phone. Therefore, there are several simple rules that it is better not to neglect, so as not to tempt fate.

First, the phone must always be charged more than 50%. Secondly, before flashing, you must make a backup copy of the data (Backup). In this case, you can return the phone to its original state. Having found instructions on any firmware on an authoritative forum, according to which the pioneers have already successfully flashed, do not neglect these points, unless, of course, you are a guru for unlocking and flashing devices. But usually, after an unsuccessful attempt, a long correspondence appears in the forum thread with the one who, so to speak, implemented this method. Therefore, the third simple rule is personal care and strict adherence to instructions.

Even if after the firmware your ZTE V880E does not turn on at all, and it became clear that it is “dead”, this is not a reason to be upset. Below are instructions for restoring a "dead" device.

Recovery instructions for ZTE V880E

• If the phone is still working, and the radio module has not been backed up, then we definitely do Backup QPST. How to do it is described. If ZTE V880E does not turn on and Backup was not done, then IMEI and MAC address will be changed during recovery. As for Wi-Fi, it should work after the radio is restored.
• Download and unpack it into any folders. We also download the Russian modified firmware version 2.3.6.
• We take out the battery, simultaneously hold down the volume "+" and "-" and insert the cable, without releasing the volume, press "on". DFU mode is loaded. The phone is identified as ZTE Handset Diagnostic Interface.
• Launch DFU Tools. On the left side, select all the checkboxes, on the right side, indicate the path to the dump. The jackdaw on the right is not selected. We press the left button below. After completing the process, the smartphone will enter FTM mode by itself. DFU Tools can be closed.
• We reboot the smartphone, now it has Chinese firmware installed.
• In the settings menu, switch to English (gray letter A).
• Install CWM and, as usual, flash to Russian 2.3.6.
• Using QPST, we restore the previously removed Baskup of the radio module on the Restore tab (where the checkbox is not selected). Those who do not have it, then we skip this point.

Option 1

1. First you need to turn off the gadget
2. Press the buttons for a few seconds Decrease Volume + Nutrition
3. Stop pressing the buttons when we see the reset menu on the display
4. Button Decrease Volume select Clear eMMC and confirm with the power button

5. After the gadget restarts, the reset process will complete

Option 2

1. First you need to turn off the device
2. Hold down for a few seconds Volume Up + Nutrition
3. Release the pressed buttons when the Android logo or brand logo appears on the screen
4. Click Nutrition in order to enter recovery mode
5. Using the keys Volume Adjustment in the menu that appears, select Wipe Data / Factory Reset and confirm by clicking Power

7. Press the reboot system now menu item at the end to complete the reset and reboot

Option 3

1. In the dialer program, enter * 983 * 22387 # and press the Dial button
2. In the menu, select the item Erase Everything
3. After reboot, the reset process is complete.

Option 4

1. Go to Phone Settings

2. Choose Recovery and reset

3. Then tap on Reset settings

4. Click Reset and agree to the loss of personal data
5. After the phone restarts, the reset process can be considered complete

ZTE Blade A510 Factory Reset

Attention!

• When a full factory reset is completed, all your personal data and applications in memory will be destroyed.
• Videos or images for some items may not exactly match your specific phone model.
• For the reset to complete successfully, the battery must be charged at 80%.

Phone recovery phone / smartphone ZTE model 7 on an operating system with a brick dpi screen. A modern mobile phone is such a complex thing that it is better not to go into its insides unnecessarily.

It happens that due to lack of knowledge or negligence, after an unsuccessful flashing, changing the software, the phone does not turn on, it is blocked. In this state, the phone / smartphone ZTE model 7 on an operating system with a screen - dpi called "brick".

It's clear what to do with a brick, but what to do with such a phone? How to reanimate and run it? Of course, there is no universal tool, for each model ZTE a6, a610 plus, z11 s, z17 and other models, there are recovery methods phone.

Errors on the phone, how to turn on the phone ZTE m2, l5, af 3. Restoring from a brick state.

Information on how to restore ZTE l110, z10, black, ZTE 4g, 5, 8 phone after flashing or from a locked state, or when the phone does not turn on, you can read on specialized forums and sites.

Negligence or error when flashing a ZTE model v7 phone / smartphone device on an operating system with a screen - dpi.

If you have done something unhealthy with your ZTE 8, 20, a910 phone, and after that it stopped loading at all and does not start up either in recovery, or in FTM, or in fastboot, then do not despair. There remains one more remedy:

Restoring dead ZTE phones that won't turn on at home.

- recovery of ZTE phones after unsuccessful firmware. The description posted on the site uses the so-called Jag method. The essence of the method is that it is necessary to make a special Jag plug by soldering the contacts (4 and 5) to each other through a 301 kOhm resistor. This Jag is inserted into the ZTE a6 phone - dpi with the battery removed. More details on how to restore your phone in this way are described here.

Restoring your ZTE phone to a working state.

- for phone owners. You can view a list of all supported devices, such as the ZTE a610 plus phone - dp and others, the Motorola Phone Recovery FAQ is posted on the link above. The site also provides a description of restoring the phone by closing the contacts with the battery removed.

Before restoring the phone, you need to download and install a special program on your PC: Random "s Developments Flash & backup. Next, you need to: remove the battery, close contacts 4 and 5 on the phone connector (see photo), keeping the needles closed insert the battery, open the needles , insert the cord into the connector and connect it to the computer, a message should appear in the Random "s Developments Flash & backup program that the ZTE z11 s - dpi phone is connected.

Restoring a ZTE phone from a "brick" state.

- this method of restoring ZTE a610c, 4, mf920 phones of different models, different manufacturers. When restoring a ZTE v, mf823d, a210 phone, special software is used: a standard flasher from MTS, a programmer from ZTE and a HEX editor. A detailed description with screenshots of actions is posted on this page of the site (see link).

ZTE phone recovery via SEMCtool program.

- this instruction is for restoring some ZTE models. Breakdown symptoms: the ZTE 610, mf90, t620 phone hangs on "Please wait", blinks with a white display, there is no network signal, no connection through DCU-60, neither through “C” or through “2 + 5”. The method of restoring the phones of the ZTE z17 phone - dpi posted on this site is using a service cable, together with the SEMCtool v8.7 software, which can be downloaded for free, on the same site.

Restoration of a water damaged ZTE cell phone - a drowned man.

- instructions with pictures on how to restore a ZTE g phone, zte nubia 32gb 32 gb, 6 after dropping it into the water. In order to prevent corrosion of the elements of the phone of the ZTE m2 - dpi phone, you must very quickly pull it out of the water and remove the battery. Then the case is removed and the phone is placed in a jar filled with rice for two days. The fact is that rice absorbs moisture very well and is an excellent absorbing agent. Ordinary homemade rice will draw out all the moisture from the smallest components of the ZTE t320, a330, mf823 phone, and also prevent corrosion. Cat litter can be used as an absorbent at home.

How to fix "Error performing operation" in Java on ZTE phones.

- instructions for users of ZTE a465, f660, a476 phones in case of problems installing applications or games on the phone. If, when entering the application / game folders, the message "An error occurred during the operation" pops up, this means that the Java machine on the ZTE l5 phone has crashed - dpi. This problem can be solved by simply removing and inserting the memory card into the phone. If this does not help, more complex actions will be required. To restore the Java machine to work, you will need to reflash the firmware FS file and do finalization. More details on how to do this are described in this article.

How to turn on your ZTE phone.

To turn on the touchscreen phone ZTE 510, blade, mf667, you need to do the following:

Press and hold the Power key until your phone vibrates.
- if the phone was turned on, but the screen is dark, press and release the power key to turn it on.
- an image of a lock will appear on the screen; to unlock the screen, drag the lock icon or click on it.
- when prompted to enter the code, enter the PIN from your SIM card. In most cases this is 0000 and click OK.
- wait for the phone to start.

Note: The PIN code from the SIM card is on a plastic card or in a package received when buying a SIM card in a cellular salon. But be careful, if the PIN code is not correct three times, you can activate the SIM card only through the PUK code, which is also included in the package received when buying a SIM card. If the PUK code is lost, it will be possible to restore it only with the passport of a citizen of the Russian Federation for which the SIM card is issued. Therefore, do not enter the PIN code incorrectly more than three times. If you have lost your PIN-code and there is no way to restore it through your service provider, you can do the following.

Cancel the PIN code request when you turn on your ZTE mf 180, l4, a5 phone. To do this, find another SIM card with a PIN code known to you (the PIN code can be assigned in the settings) and insert it into your phone. Turn on the phone according to the steps described above, when entering the password, enter the PIN code you know from another SIM card. Having successfully turned on the phone, go to the phone settings and cancel the PIN code request when you turn on the phone of the ZTE af 3 - dpi phone. Having done this, turn off your phone and change SIM cards. Now, when you turn on the phone, the system does not require you to enter the PIN-code.

This is of course elementary advice, but there is a solution to problems and more serious.

Advice. Initially, the SIM PIN is provided by your network operator, but you can change it later in the Options menu. To correct a mistake when entering your SIM PIN, tap the Delete icon.

ZTE phone does not turn on! Phone self-test error

The very first thing to do is to try to reflash the ZTE af 3, a3, x9 phone. But the problem of not turning on the phone may be not only due to the "flown" software, but also due to the breakdown of the power button to turn off the phone, breakdown or failure of the battery - charger, etc.

ZTE phone won't turn on. What to do?.

- a very detailed description of how to fix the problem phone ZTE z7, nubia z9 max, gf3 does not turn on, how to turn on the phone. The article is divided into points, with a solution to each problem point by point: checking the power source - the battery, the power button is faulty, the power button circuits, the power controller or its soldering failure, secondary power sources - the power supply of the processor, memory and rest. devices, setting up the software of the mobile phone of the ZTE af 3 phone - dpi.

Instructions for restoring a phone, a ZTE l110 phone on an OS platform on a screen with a resolution, the type of a non-working state is a brick More details on how to restore the device, turn on the touchscreen ZTE v8, 10, 7, v7, a6, a610 plus, z11 s, z17, m2, l5, af 3, l110, z10, black, zxhn h118n, 4g, 5, 8, 20, a910, a610c, 4, mf920, v, mf823d, a210, 610, mf90, t620, n1, g, zte nubia 32gb 32 GB, 6, t320, a330, mf823, a465, f660, a476, 510, blade, mf667, mf 180, l4, a5, s6, l3, v815w, l2 lte, af 3, a3, x9, z7, nubia z9 max , gf3, v5, x5, axon mini, af3, blade q lux, lite, af5, 1920x1080, hn, l370, v2 white, MTS 535, geek pro, leo black, z5s, star, z5 gray, s, v987, t220 , t221 red, x7 lte, x3 gold, m, v790, blade v807, v880g, v880e, v970, v970m, v889m, skate, grand era, r221, mimosa, v8110, a21plus, v71b, e7, v9c 1, light tab 2 , v9s 3g, light tab 3, light tab v9a, v9 light, v98, life and what to do if your cell phone won't turn on.

Popular ZTE Reviews

	"I called you, and why didn't you pick up the phone?" "I didn’t hear the phone ringing. Tell me where you can download a loud ringtone to your phone?"
	You can find out more about how to Download free ZTE music here, for this follow the link above.
	Here you can find the latest and up-to-date drivers for ZTE mobile phones and tablets. This link contains the correct, correct programs and the latest drivers for ZTE mobile devices.
	If for some reason you have difficulty connecting your ZTE phone to a laptop or PC via wifi, bluetooth, usb, read the following instructions.