5s fell into the water what to do. IPhone fell into the water: what to do and where to go

05.11.2021 Floriculture

Moisture damage is the worst of the most common adverse effects on a device. If iPhone fell into water or it gets water (even a few drops), there is a danger of short circuit and corrosion of the components. To make repairs possible and not cost a lot, IMPORTANT: promptly, even if the iPhone 6 is working (DO NOT TURN ON to check), the ingress of liquid after a while (a day or a week) will lead to serious problems in the operation of the smartphone, such as: overheating, short circuit to the mat. board, damage to its microcircuits, etc.

The penetration of liquid into the iPhone occurs through the connectors (recharging and for the headset), the gaps of the microphone, speakers, between the buttons and the case, technological holes between the panels of the case, as well as through the cracks in the outer shell of the iPhone 6 that occur over time.

Breakage due to water ingress in iPhone 6 (6 Plus)

iPhone motherboard - complete failure or breakdown;
problems in the functioning of the connectors;
buttons refuse, including - the problem is in the Home button;
dark spots and streaks appear on the screen, or it stops responding.
the sound in the iPhone may disappear or there may be noise in the speaker, the microphone may break;
will require repair and the lower train.

If your iPhone fell into water, you poured it with coffee or other liquid, the chances of a full phone recovery will directly depend on the speed of your actions. Take the following steps urgently:

turn off the phone, which is wet, to avoid short circuit
blot your dropped phone with an absorbent cloth
dry your phone following the tips below

If you are the proud owner of the seventh iPhone model, there is no cause for concern at all. The latest versions of the famous "apples" are maximally protected from liquid getting inside, and neither its display, nor the sensor, nor the speakers are afraid of water. The manufacturers guarantee that you can safely swim in the sea with it, talk in the rain, use it in the pool, spill coffee on it. After dropping into water or getting moisture on the body of the device, it will be enough to wipe off the water droplets from its surface with a soft, highly absorbent cloth.

With other versions of iPhones, after being in water or under water (for example, "drowning" in the toilet or getting wet in the rain), you will have to tinker. Even a slight exposure to moisture is fraught with serious damage to them, the elimination of which will cost you dearly. It is especially dangerous if moisture gets inside the device, as water droplets often lead to corrosion processes and irreversible damage to the electronic components of the iPhone.

You will face the following problems in the operation of your smartphone, which fell into the water and was not dried on time:

clouded iPhone screen
the display does not correctly transmit the image, there are stains
lost sound and speakers do not work
the phone does not charge well and does not hold a charge
screen sensor does not work
the camera does not shoot well

To avoid all these troubles from exposure to moisture, it is necessary to properly dry the device, and if there are consequences of water droplets on electronic components, immediately take the iPhone for repair.

First steps after moisture ingress

If the iPhone falls into the water and you immediately take it out, remove all water droplets from its surface. Dab your smartphone that gets wet with a dry cloth or soft cloth. To prevent liquids from getting inside and oxidizing electronic components, dry the phone that gets wet. There are three ways to do this:

use a special drying cover
dry with a hairdryer
use rice

The safest and most effective way to minimize moisture exposure on an Apple device that gets wet is to use an iPhone drying case. The phone should spend at least 48 hours in it, after which its functionality will be fully restored. It is good to use such a gadget after you got into the rain with your iPhone, accidentally dropped it into the toilet, poured coffee or other liquid. Turn off the device before drying it.

If there is no cover, regular rice will help to minimize the impact of moisture on the dropped phone. The procedure for restoring a smartphone that has gotten wet in the rain, has been in water or has been spilled on is simple:

take a deep cup, put an iPhone in it that has been in the water (toilet bowl, puddle)
cover the phone with rice
dry your smartphone in this way for at least a day

The rice should soak up all the water and stop the corrosion process on the inside of the iPhone. The disadvantage of this method is the inevitable ingress of rice particles into the camera, speakers and other connectors of the smartphone. After you've dried your phone, camera, touchscreen, and headphone and charging inputs, you'll need to clean them.

If you decide to dry your phone with a hairdryer, avoid excessive heating of the case. It is best to disassemble the iPhone model first and remove its battery. After that, direct the minimum air flow to its internal components, because both the sensor of Apple devices and the camera, display, speaker modules are extremely sensitive to any overheating. Unacceptable:

dry the phone at high power
use "hot" drying mode
bringing hair dryer too close to iPhone components

Otherwise, you will need a screen replacement and other apple repair.

You can also disassemble and dry an iPhone that is wet or completely "drowned" in water, naturally. Remove the battery and leave the device open for a day. If after falling into the water your smartphone worked and did not turn off, the above measures should be enough to completely restore the phone.

When a service repair is needed

An iPhone that has fallen into the water must be urgently carried to a repair specialist if a short circuit occurs and the smartphone does not turn on after being removed from the liquid. Also, the following "symptoms" are the reason for contacting a specialist:

liquid spills on the screen or the picture disappears altogether
spilled any chemical liquid on iPhone
the phone was in the water for more than 30 seconds before it was taken out
liquid penetration is aggravated by mechanical damage to the case

Dab the wet phone with absorbent tissue and take it to a professional. A specialist will eliminate the effects of moisture on the internal electronics. For this will be used.

Yes, we really did it - deliberately drowned the iPhone and it was awful ... cool. Throwing an iPhone into the water and not getting it turned out to be very difficult, but suspiciously pleasant. How long do you think the iPhone will live at the depth of the aquarium? The answer is in our article.

What was it

Typical advice from the Internet

Once we read the comments of "experts" urging to save on the service and revive the drowned phones in home conditions.

OK.

The plan is as follows. We go to a good service center, we take an iPhone, we drop it into the water and wait until he throws back all the horns and hooves. Ask for what? Yes, for everything that hurts:

And then we try to reanimate the dying phone: dry it under a hairdryer and throw it into a container with rice. On the web, they say that this is a cool idea - that means that we act this way. The Internet will not advise nonsense.

so: drown, take out, dry at home. Will it come to life?

I'm getting ahead of myself: I didn't come to life.

How he was drowning. Mmm.

This Video.

Beautifully plunged into the water, blinked goodbye, and then, of course, died.

Didn't turn on anymore. It is done!

What was it really

The idea is to check if it is possible to restore a drowned iPhone 5 after a long pause.

Wanted recreate real conditions: I dropped it, believed the tales on the Internet and came to the service only a few days after swimming, when the device no longer turns on under any persuasion.

This is how it looks pay iPhone that was incorrectly saved:

To an ignorant person, this photo is unlikely to demonstrate all the tragedy. However, in photographs from a microscope, you can see everything, just like a knife to the heart:

I will never drop my iPhone in water again. Damn, as if not to crack.

The iPhone was punished in front of my eyes, and restored later, by the forces of service engineers. At the request of the editors, a small video was filmed in which an engineer pokes a stick into a dead piece of silicon and for some reason brings him back to life... For your convenience, we have accelerated the whole process 25 times and added cute music.

Video: how the cleaning goes

“After opening the device, we were struck by the highly oxidized and already starting to rot connectors for the display, touchscreen and the top loop, on which the front camera, light sensor, filter and speaker contacts are located. Without unnecessary manipulation, we at the same minute removed the damaged connectors and threw them away, because in such a state you can't cook porridge with them.

After stripping the contact tracks from the gumboil, the master began to bulk clean the motherboard. First it manual brushing using chemistry in order to remove the main plaque and oxidation from the affected elements, and then cleaning in an ultrasonic bath.

We dry, re-clean by hand and begin to restore the soldering on the rotten contacts and elements. Then we soldered all the missing connectors and noticed what happened short circuit under the compass chip. Remove and install a new IC.

As a result, it started up and works great. "

Two weeks later

We drowned our iPhone in plain water. He died, then came to life. The price of the issue in the end, it did not catch up with the purchase of a new model.

Procedure cost: 6500 rubles including components and wizard work.

Price of the new model: 24500 rubles... V 4 times more.

What has been replaced:

Soldering: 1500 r.
Complex cleaning: 1000 rub.
Replacement of three connectors: 1500 r.
Replacing the compass chip: 2500 r.

The layout is transparent. Four treatments together cost much less than a new phone, without the need for tools and technical knowledge.

Memo for those who drown their iPhone

You have to do three things:

1. Turn off your smartphone if it is still working.
2. Wrap it up in towel and shake the liquid out of it. Without fanaticism.
3. Pack up and go to the nearest service. Minutes count.

By the way. In the service, do not forget to warn in what liquid the phone was swimming. It directly depends on what and how its components will be washed.

By default, it is used isopropyl alcohol the highest concentration (90% or more), but distilled water can also be dispensed with. The solution is changed after each procedure. If the device was bathed in salt water, toilet, alcohol and other “non-standard” liquids, be sure to inform about it so that the service staff knew in advance which enemy they would have to fight with.

The worst case is sea water.

Sea water can destroy the device incredibly quickly. Until you take him to the service - everything is already rusty and flowers are growing! These repairs are often unpredictable - 50/50. But the faster the device gets to the service, the higher the chance.

And if you forgot your smartphone in the washing machine, do not rush to save him - most likely, it is too late. On the contrary, wait for the machine to finish drying. The experience of the service center shows that in this situation, the percentage of "surviving" or successfully repaired devices is much higher!

A mobile gadget, accidentally dropped by the owner into the water, but still functioning, interacts simultaneously with positively and negatively charged ions. This situation inevitably ends with a short circuit, causing irreparable harm to all internal elements of the device, which are entrusted with the function of conducting energy in a complex circuit. What to do if water gets into your iPhone, and can a drowned device be brought back to life?

After the user has drowned the iPhone, destructive processes begin to occur in the device. It doesn't matter which model of the gadget - iPhone 4, iPhone 5, 5S or any other - its internal parts from moisture will stop working normally. And, it is clear that the longer the dropped smartphone has been in contact with water, the stronger the destructive effect will be. Therefore, it is better not to get into such situations at all when the iPhone has fallen into the water. But, alas, sometimes this kind of trouble happens when, through the user's carelessness, the device was able to fall into the water - for example, while relaxing in nature, in the pool, etc. What to do in such a situation and how to bring the device back to life?

If the iPhone 6 fell into the water (or a gadget from an Apple of another model, as well as any other mobile device), and does not turn on, you must do the following steps:

Get the device out of the water as soon as possible and turn it off (in no case should the gadget turn on if it turned off itself).
Remove the battery from the smartphone.
At this stage, the most important work begins to determine if the gadget will work or if it has hopelessly deteriorated when the owner dropped it into the water.

If the iPhone falls into water and doesn't work at all, it probably has a short circuit. Then the battery cannot be removed, since this process can be repeated several times inside the device. The device cannot turn on, but an energy source continues to operate in its case, which does not need user commands to destroy a number of microcircuits. We can say that in a matter of minutes, the motherboard is damaged - perhaps the most important part of a smartphone. That is, this stage includes a thorough examination of the iPhone, which may have just drowned.

If iPhone falls into water, immediately after removing the device from the water, you need to wipe it with a dry cloth. At least, this way the owner of the gadget will not allow further penetration of moisture into the device case.
Go to the service center for a specialist to disassemble the device and examine it inside to identify damage and subsequent repair. Of course, if the user himself is well versed in technology, he can disassemble the device at home without resorting to the services of a master. But this must be done very carefully, trying not to damage fragile parts.

If, nevertheless, immediately after the owner of the smartphone dropped it into the water, he decided to immediately go to the service department, on the way there you need to make sure that the device does not turn on. Also, do not wrap the device in cloth - better. To ventilate it. Otherwise, the humidity inside the case will increase even more, and the destruction processes will accelerate several times.

As a rule, flushing an iPhone is not difficult, but repairing it is much more difficult. To spoil the device in this way, you just need to be a sloppy user. And for the repair of the device, as the practice of the workshops shows, it will take at least a day, or even more time, depending on the degree of damage. The latter, as already noted, depends on how long the device has been in a humid environment.

Sometimes the repair time is delayed due to the search for the desired part.

Although, it happens that everything is bypassed (this is if the liquid has not penetrated to the motherboard), and the performance and functions of the iPhone are not disturbed.

It so happens that the owner of the device himself accelerates the process of "death" of the gadget, slowly referring it to specialists for diagnostics, but uses the so-called "folk methods". In many forums on the Internet dedicated to iPhones, user messages are full of tips for self-reanimating the device after getting liquid into it. Is it worth using these methods if your iPhone 6 falls into the water, will be discussed later.

What to do if the iPhone falls into the water: folk methods

On numerous forums, anyone can read the fantastic story of a user who independently revived his iPhone after it fell into the water. At the same time, the emphasis is on simplicity, accessibility, and, of course, the low cost of such a method. Sometimes the use of such methods leads to success, but these are rather special cases, due to the fact that initially the device did not have serious damage. In other cases, risking smartphones worth a thousand dollars or more is not worth it.

So, after removing the device from the water and wiping the gadget with a dry cloth, in no case should you use a hairdryer to dry it further. Yes, this advice is most often given by "craftsmen" on the forums. Too hot air leads to damage to internal parts and accelerates the process of their breakdown no worse than the water itself that gets inside. It is better to disassemble the device as the first step after removing the device from the water in order to conduct an initial diagnosis. But this can be done only if the user has the necessary tools, and if he has at least a basic understanding of the technique. Let's say this procedure was successful. What should be the next steps?

Further, folk methods of "treating" a drowned but rescued iPhone recommend the owner to place the device in a container, into which raw rice must first be poured. In their opinion, the groats effectively dry all the parts of the device, including the internal ones, and the smartphone will work the next morning as if nothing had happened. It should be said right away that this advice is designed for naive simpletons who have no idea about the internal structure of a mobile gadget. But for the sake of interest, let us analyze in more detail what is the essence of the "rice" method of reviving a smartphone after it falls into the water, in order to understand that it is meaningless.

So, the essence of the method using rice is this. Immediately after the incident, when the smartphone was either completely immersed in water, or a large amount of liquid that could have penetrated into the body simply fell on it, you must immediately turn off the device and wipe it dry. Then you need to take a volumetric container and pour dry rice into it. Put the iPhone inside the container - so that the rice almost completely covers it. Some advisors promoting this method advise to close the container tightly with a lid - supposedly this way the effectiveness of the procedure is increased several times.

But let's figure out what actually happens inside the container with rice. First, let's talk about a device that has received a small amount of water, i.e. the liquid has not penetrated deep into the housing. In such a situation, the user using this method will remove a completely viable smartphone from the container with rice cereals. Rice will actually absorb small droplets of liquid, but only those that have not penetrated deeply.

But, nevertheless, the "rice" method is very dubious. Yes, indeed, it is capable of absorbing moisture. But the liquid itself is not as dangerous as the substances contained in it - minerals, etc. After the liquid evaporates, these substances will settle on the internal parts of the device, subsequently causing the phone to break or completely unusable.

The state of the iPhone after falling into the water

Every day, defective devices are brought to the repair shops for smartphones from Apple for repair. Interestingly, a fairly large percentage of malfunctions of these devices is caused by moisture penetration into the case. Moreover, it often happens that water got into the gadget for a long time - a few months or even a year ago, but the breakdown happened only now. The owner of the phone can forget about the incident for a long time, while inside the device important parts are gradually decomposed.

Every iPhone that gets into the repair service after contact with water is necessarily disassembled by the master to the smallest elements. Sadly, many details in such a case cannot be restored (for example, a broken tightness of the camera module). Here you will have to change the part to a new one.

Usually, if a lot of liquid gets inside the device, the motherboard is hopelessly damaged. This is known to be the hardest and most expensive part of an iPhone. Moreover, it can be very difficult to find this part for replacement. In such a situation, the owner of the device faces a choice, which is easier and cheaper - replacing the "motherboard" or purchasing a new iPhone.

24.01.2018 Frenk 13 comments

When the summer holiday season is in full swing, it is not only sunny weather, but also the time when phones, tablets and music players fall into the water.

Apple devices are no exception, in particular iPhone 6, iPhone 5, iPhone 7, iPhone 5, iPhone 5s, iPhone 4, iPhone 6s, iPhone se, iPhone 8, iPhone 6 plus and so on.

Therefore, this text was created so that people who seek help after their iPhone fell into the water do not follow the advice of pseudo-specialists.

Here I have collected the most common mistakes made by my clients that brought flooded iphone 6, iphone 5s, iphone 6s, iphone se, iphone 7, iphone 5, iphone x and wrote tips that will help everyone increase the chances of successfully restoring your gadget.

I decided to split this post into two parts. The first is what to do if you don’t want to go to the service and echoing the professional approach.

Of course, the first option is 50/50 - even if your phone starts working as before, this does not mean at all that after a while you will not notice that it does not work (speaker, sound, sensor)

The amateur part - what you can do yourself if the iPhone falls into the water

The latest models boast relative water resistance (can easily withstand 30 minutes in water at a depth of 1 meter).

In addition, the manufacturer claims full dust resistance, but this is only Apple's promise.

For example, an iPhone 7 described as waterproof does not mean that we can safely throw it into a pool and observe it sealed.

There are already dozens of people who have learned about the lack of water resistance in it. In addition, the victim cannot claim compensation from Apple, which ... washes their hands, voiding the warranty in the event of a drowning.

Therefore, it is worth remembering a few rules that will allow you to save it.

IPhone fell into the water - disconnect all cables

When there is water in your iPhone, don't even think about plugging it into a charger. Make sure the cable is not connected to the smartphone and do not charge the phone until it dries completely.

Any additional flow of power can further destroy the components located under the chassis.

An iPhone fell into the water - gently wipe off the liquid

Yes - nothing to wait, although I think before you have to deal with wiping out the liquid inside the iPhone.

The best cloth for wiping your glasses is - it is durable, absorbs water and does not stick (unlike microfiber cloth, which can tear).

IPhone fell into water - dry it

After gently wiping off the liquid, place the phone with the charging port facing down to allow the water to drain out.

Dry outside or in a dry and warm room for at least two days. At this time, do not try to start.

When the time is up, you can check if it works. If everything goes as planned, the water should evaporate and the phone should work flawlessly.

Unfortunately, this solution does not always work, so another method is worth using. - use of rice

In this case, put two cups of rice in an empty container and insert the phone there. This must be done in such a way that the smartphone is completely covered.

We leave it in rice for 24 hours, after which you can check the device. Do not try to turn on your phone before, as this may increase the risk of damage to components.

The professional part - what not to do if your iPhone or iPad falls into the water

Whatever happens to your device after water gets into it (it doesn't turn on, the speakers don't work, the screen doesn't charge, the screen doesn't work), the first steps are always the same.

The greatest sin is right after they get wet, dry it up and check if it can work.

This is often due to the fact that immediately after the device has become wet it usually works without any serious symptoms for some time.

This is because the liquid itself is not the most harmful, and the problem is corrosion of electronic components, copper compounds and metal elements.

Unfortunately, the drying out of a flooded device accelerates corrosion. Of course, depending on the fluid, corrosion can proceed faster or slower.

Faster, e.g. when exposed to seawater. Slower when it's just fresh water. Ideally distilled water would be.

After water intervention, a short circuit is created on your phone, and liquid and corrosion will not leave the inside of your iPhone on its own.

Attempting to connect a power source has a very negative effect on the flooded device.

Attempts to turn on flooded equipment do the most damage - ICs are burned, etc.

There are also people who, unaware of the problem, try to connect the phone to the computer using a USB cable.

They hope to recover data that is more valuable to some than the device itself.

Unfortunately, such situations happen very often among Apple hardware owners, only it will not remove water and corrosion from the inside of the phone.

Conclusion - what should not be done if the iphone fell into the water

Under no circumstances do we connect a power source or USB cable or try to dry the phone with a hair dryer or heater.

The soft myth is the beneficial effects of rice on consumer electronics. Yes, rice is hygroscopic, but too small to remove all the water from the inside of the rather sealed shell and soak into the grains.

Even if we wanted to use some highly hygroscopic substance, we need to do it immediately after flooding.

Inserting the phone into rice in no way guarantees its full recovery and performance for a long time.

Some people believe in the power of rice and think that since the phone works after this "treatment", it can be used safely.

Others think that maybe the water didn't get too hard because it works. Yes, I know people who threw the phone in a bucket full of water and pulled it out, wiped it on their pants and still use it today.

Unfortunately, I also know that the water did not flood the entire phone, but only got into less important elements, such as the area around the antenna, speaker or headphone jack.

The phone itself seemed to work just fine. Unfortunately, corrosion processes usually do not stop at items that the user does not use on a daily basis.

In addition, such a short circuit in one place is not only dangerous (I had a Siemens M55 repair that caught fire in my pocket after being hit by water), but it also uses up the battery a lot.

If the iPhone is still working after water, even if it got into it, you can enjoy it, because the chances of saving and restoring it 100% are very high.

So - what to do when iPhone falls into water

The ideal situation is to remove the battery and get the device to qualified service as soon as possible.

Unfortunately, for Apple brand products, without the right tools and professional service and experience, this cannot be done.

An iPhone not only requires a lot of work, tools and skills, but its battery is soldered to the motherboard, and a soldering iron is required to remove it.

Will the iPhone be repaired under the Apple manufacturer's warranty? Under the terms of the manufacturer's limited warranty, the unit will not be repaired or replaced with a new one after water intrusion.

There is also no chance that a technician from the manufacturer's service will not notice the moisture and the phone will be replaced with a new one.

Inside each phone, there are humidity sensors, the so-called litmus sensors, which change color when the humidity level is high enough.

It is enough that only one of them changes color, it means that it is working in inappropriate, humid conditions, so that the device can be withdrawn from warranty repair.

IPhone repair after water

IPhone flooding repairs are not typical. It can be called a more complex repair process, which consists of many different actions aimed at restoring the device.

First, the degree of damage is determined. Sometimes the water affects only part of the device, for example, the lower one, then all the upper elements are recognized as effective.

Elements that come into direct contact with the liquid and are clearly corroded are immediately removed and replaced with new ones.

The actual repair begins with working on the most important part of the iPhone - the motherboard.

It is cleaned, first mechanically, where the motherboard is cleaned of all dirt with various types of brushes.

Then it is placed in an ultrasonic bath - a device reminiscent of kitchen equipment, where ultrasounds of different frequencies wash out the sediments.

This cleaning can take up to several days, depending on the severity of the fluid and corrosion.

In the case when the level of contamination does not allow the device to solve the problem, the device is transferred to a centrifuge, where cleaning takes place more thorough cleaning of various deposits.

13 thoughts about “iPhone fell into water - solution found”

Hello. The phone fell into the bathtub. Probably stayed there for about 1.5 minutes. At first it worked, then turned off. I can not take it for repairs within 4 days. How do you think will survive? IPhone 8 plus

To answer

I wanted to add. My phone is behaving strangely now. It reboots shows an apple then turns off again. Like this over and over again.