The door handle is used several times a day, which leads to the need for repair of the device or complete replacement. The first stage of the work is to disassemble the handle and find out the causes of the breakdown. How to disassemble the interior door handle yourself, read on.

Main types of handles for interior doors

The following types of handles can be installed on an interior door:

• stationary. The handle does not have any latch elements and serves solely to close or open the door. Stationary handles can be installed on one or both sides of the door;

• push. When the door handle is pressed, the latch mechanism is pulled into the handle, allowing it to open. If the handle is located in a horizontal direction, then the door is closed and fixed in the selected position;

• rotary. The locking latch is activated by turning the handle. For maximum user convenience, rotary handles are made in a round shape. Round pens are also called knob pens.

Push and turn handles can additionally be equipped with key-operated locks.

Disassembling handles

When is it necessary to disassemble the handle?

Self-disassembly of the handle may be required:

• when the latch mechanism creaks or jams. In this situation, it is enough to lubricate all working elements. For lubrication, machine oil or a special mixture of WD-40 is used;
• if the device is inoperable due to a long period of use or lack of careful treatment and periodic maintenance. All door handles require regular inspection and timely lubrication of moving elements, which increases the service life of the product;
• for routine maintenance, for example, replacing a latch or tightening the fastening bolts that secure the device to the door leaf;
• to replace the handle with a newer or more advanced model. New models are constantly appearing on sale, which can serve as a piece of furniture or have a greater degree of protection.

How to disassemble an interior handle for repair or replacement? To do this, you need to read the following instructions, which were developed by experts for the most popular types of pens.

Replacing stationary handles

To replace the stationary handle, you need to unscrew the fixing screws, which can be located:

• on the front of the handle;
• under the decorative trim.

To remove the decorative trim, just carefully pick it up on one side with a sharp tool.

Disassembling rotary handles

To disassemble the round handle, you need to prepare:

• special wrench to loosen the locking pin. The key comes complete with a handle. If the special device is lost, you can use any hex key that fits the diameter;
• screwdriver

The handle is disassembled as follows:

1. On the decorative trim you need to find a hole for a hex key. It is most often located below or on the side;
2. The key is inserted into the hole and pressed lightly. In this way, the locking pin is loosened;
3. The other hand removes the handle. To do this, just pull the device towards you;

1. at the next stage, the decorative trim covering the hole in the door leaf is removed;
2. Under the cover there are mounting bolts that need to be loosened using a screwdriver. After performing this operation, the door handle splits into two parts.

If you need to replace the rotary knob, you will also need to remove the latch. To do this, simply unscrew the fastening screws located on the end part and fixing the corresponding mechanism.

Removing the latch mechanism

The process of self-disassembling the rotary knob is presented in the video.

Disassembling lever handles

To disassemble the handle with a pressure mechanism, you will need a screwdriver that is most suitable for the mounting bolts.

The disassembly process is carried out according to the following scheme:

1. The first step is to remove the decorative trim. The cover can be attached in two ways:
   • using thread. To remove the element, you need to turn the cover several times counterclockwise;
   • using a locking tab. To remove the cover, you will need to move the tongue slightly in any direction with a sharp tool;

If, due to contamination or damage, the cover does not come off, you can use a screwdriver and a hammer. A screwdriver is inserted between the trim and the door. Hitting the screwdriver handle with a hammer allows you to move the mechanism and unscrew it completely.

The locking mechanism of the push handle is removed in the same way as handles with a rotary system.

After familiarizing yourself with the proposed diagrams for disassembling door handles, you can repair or replace the device without the help of a specialist. To install the handle, you can follow the instructions included with the new device or perform all the steps indicated in the diagrams in reverse order.

Today there are a huge number of different types of door handles. All of them are quite reliable, but sometimes they still have to be replaced or repaired. However, a problem arises here - not everyone knows how to disassemble This is the most necessary element of furniture in everyday life.

How to properly remove a door handle mounted on an interior door yourself? Read about it below.

Reasons for dismantling

In most cases, it is necessary to disassemble the handle if:

• she got loose;
• fell into disrepair;
• the lock itself needs to be replaced.

In the first case, there is usually no need to remove it. It is enough to simply tighten the screws holding it, or replace them with thicker ones (if the wood is worn out).

Unfortunately, budget versions of handles, in principle, cannot last long, and besides, they are made completely unsuitable for repair. The coating on them is usually quite unstable and will quickly peel off during use. Therefore, when they fail, they are simply replaced with a new one.

Often, during renovations, owners decide to replace old handles with new ones that are more suitable for the design being created or simply look more modern.

When buying a new kit, try to choose those that are made of good metal with a minimum number of components. Reliable pressure models, for example, should be equipped with bearings - they can serve you for several decades. By the way, quality is very easy to determine: the heavier the fittings, the higher it is.

The most common types of door handles

Most often, the following three types of handles are installed on interior doors:

• stationary;
• nobs (round);
• push.

The latter variety is considered universal, since it can be equally often seen on both entrance and interior doors. This mechanism in its normal position has an extended locking tongue, and when it becomes necessary to enter the room, the handle is pressed and it leaves the grooves. In this case, a lock is usually cut into the canvas, protected by special pads. In order not to damage the latter, disassembly must be carried out as carefully as possible.

In our country, a round handle equipped with a latch is used only on interior doors. Abroad (for example, in the USA) they are often placed on input. It has a key hole on the outside and a locking button on the inside.

Stationary models are installed mainly on swing doors. This design is convenient, but not very functional. In essence, it is an oblong bar on which a U-shaped bracket is attached. In the simplest versions, no locking mechanisms are provided - the door is closed with a separate bolt. More advanced models also have a roller latch, installed independently.

Prepare the following tools for dismantling:

• flat and Phillips screwdrivers;
• thrust wrench (included with the product).

If the model is without bolts (that is, with hidden fastenings), then you need to act in this order:

• Using a flat screwdriver (being careful not to damage the decorative coating of the door), unclip the trim located at the base;
• Unscrew the screws hidden under it;
• use a stop wrench to press directly on the stopper;
• remove the handle by carefully pulling it towards you;
• After dismantling, unscrew the screws holding the locking mechanism.

In simpler round models, disassembly is much easier - just unscrew the two long bolts located on the back side on either side of the latch.

In this case, you just need to unscrew the self-tapping screws or screws securing the strip to the door leaf.

Here it is worth understanding that replacing this type of handle must be done with a similar one in size. Otherwise, traces from self-tapping screws will not be hidden. They are especially visible on varnished surfaces.

Individual models are connected with bolts through the door - this method of fastening is convenient for both the manufacturer and the consumer. In this case, you just need to unscrew them from the back and both handles will be removed.

Lever handle

All that is required is to remove the trim (in most models it is connected to the handle). In simpler versions, you just need to unscrew two screws from the door leaf.

In advanced ones, all fasteners are hidden behind a decorative cap - it either snaps off or is screwed onto a thread. By removing it, you will have access to 3-4 screws that need to be unscrewed with a screwdriver. Don't forget to also remove the clamping screw mounted directly on the handle - it secures the square pivot rod. After this, disassembly can be considered complete.

Assembly nuances

Before placing the handle in its intended place, secure the locking mechanism - turn its oblique surface in the direction of closing the door.

It is important to tighten all screws and screws as tightly as possible - the better you do this, the longer they will not come loose.

After assembly, check how the mechanism works - the latch should fit freely into the groove and ensure reliable fixation.

Any door handle has its own lifespan and is subjected to significant loads every day. Therefore, sooner or later, the question arises of replacing the old pen directly with a new one. Basically, all door fittings are installed by employees of the manufacturing company where the doors were purchased.

But when the handle fails, in most cases you will have to disassemble it yourself at home. Precisely, in such cases, you will need certain knowledge and information about the process of disassembling any door handle.

So, from the beginning it is imperative to determine what type the broken handle is, because the process of disassembling it depends on this. In the modern world, there is a huge selection of door handles with very diverse designs and shapes. But, in general, they can be divided into several main types.

Lever handles

Lever handles are typically installed on both interior and exterior doors. They are characterized by a door latch, which goes inside the door leaf when you press the handle. In the normal position, the metal latch tongue is extended.

Such handles are mainly found on doors that are equipped with mortise locks. The linings for such handles also come in two types: braided (solid) or separate (sold together with the lock included). When disassembling them, you need to remember the place where the latch was located.

Handles - knobs

In most cases, lever handles are designed to be installed on interior doors. Visually, pens of this type resemble a ball shape (but there are other shapes). The keyhole is located in the center of the door hardware. It is opened with a key only on one side, and on the other there is a button - a lock.

Stationary handles

Stationary handles are available in the form of strips, brackets, round, U-shaped, curly, etc. They are attached directly to the door leaf using screws. Even when purchasing this handle, the kit may include a roller latch, which will secure the door well when closed and open easily when the door is opened.

Now that the type of handle has been determined (it is regular or has a snap mechanism), you can directly begin the process of disassembling it.

1. In the case when the handle was screwed with self-tapping screws, then use a screwdriver to unscrew the main part. Once unscrewed, it is inspected for damage. If repair is impossible, then it is better to purchase exactly the same one instead.

You just need to make sure that the door trim matches the previous type, because at the attachment point there are already previously made holes for screws, which will be very difficult to hide if they do not match the new door trim. Therefore, it is recommended that you first dismantle the old handle and run with it to the nearest hardware store to buy a new one.

2. This type of handle may also have a common rod; you can verify this in the following way: you need to hold the door handle on one side and turn it counterclockwise on the other. The handle is rod-shaped, in the case when it is unscrewed. If this is the case, then the element is unscrewed on one side and the structure is removed from the reverse side, then a similar version of the new door hardware is selected. You can replace the old handle, for example, with a version with a latch, only the space from the rod needs to be covered with a new cover.

3. Handles that have mechanical latches are removed as follows: using a screwdriver, you need to carefully unscrew the screws and at the same time remove the decorative trim that is located around the handle (again, be extremely careful so as not to break something or forget the place where how the removable part was located).

The main components of this type of handle are the tetrahedral linings and the latch tongue mechanism. When the fittings are removed, you can see what the handle is supported on: it happens that a hole is made in the tetrahedral rod, and exactly the same in the handle, then a small rod with a cap is threaded through them. In such cases, the rod is simply removed and the handle is quite easily and simply removed. On the reverse side, you first need to unscrew the lining and remove the handle with the tetrahedral rod.

How to disassemble a round door handle

When disassembling a knob handle (or a round door handle), you must adhere to some rules, and this process will be absolutely easy, without any possible difficulties. Typically, this task requires a Phillips or flathead screwdriver, depending on the type of fastener. You will also need a key with a stop, which is provided with the handle when purchasing it. So, we’ll look at how to disassemble a round door handle below.

1. First, you need to use a flat screwdriver to pry and remove the flat trim, which is located around the door handle. Next, take a special key or any sharp and thin object that can be found at home, use it to press the open stopper, and pull the handle. Then it is carefully removed and several screws are unscrewed from the side where the handle was removed. Now both parts of the handle are removed from the door leaf and only after this can you unscrew the screws that hold the latch in place.

2. There are also cases when there is no need to change the door handle, but you just need to unfold it and then install it in the reverse order. To complete this task, first you need to insert the latch into the door leaf towards the closed door with the beveled side of the tongue and screw this element using two screws.

Next, the part of the handle on which the key mechanism is located is inserted into the desired side of the door. Then the clamping part is inserted from the opposite side and secured with two screws. At the end of the work done at home, be sure to check how the handle turns and whether it easily returns to its original position. If some difficulties arise, the handle needs to be aligned as necessary.

3. Next, the decorative strip is put on and the remaining part is installed in the clamping part. As a rule, a square rod with a metal flat plate must fit straight into the handle; to do this, you need to turn the lock on the handle so that the slot coincides with the same position of the square rod.

4. The final stage is as follows: you need to put on the handle and when it reaches the stopper, retract it, press the clamping part across the axis. Next, the removable part of the handle is pushed in all the way, reaching the clamping structure. The decorative strip is aligned along the groove, and eventually is completely put on. Well, of course, after these steps, the handle is checked for the quality of fixation and operation: you need to turn the handle several times until it stops on each side (that is, from the side of the drum latch mechanism itself, as well as from the latch side).

An attentive and responsible owner takes time to repair and replace worn-out household items. A door handle is a functional element of fittings, with which, due to frequent use, various problems occur: the mechanism can jam or click. Often the fastening points become loose, causing the handle to become loose and uncomfortable to use. To find out which element has worn out and broken, you need to gain access to the inside of the product. Thus, in order to replace outdated parts or the entire product with a new one, you need to dismantle the fastening from the door leaf. To do this, you should consider in advance the question of how to disassemble the door handle. By becoming familiar with the best method, you can reduce your time and effort.

Depending on what type of fitting this element belongs to, the technology for its removal and disassembly will differ. You can easily learn how to remove a handle from a door using a step-by-step disassembly diagram. The main types of designs: stationary, push, rotary or knob handle. Removing a stationary handle from a door is easiest, since it is in no way connected to the lock mechanism. Accordingly, when removing, the push and turn are disassembled.

When may dismantling be necessary?

• Breaking. The more complex the design of the product, the higher the likelihood of an early breakdown. It is also worth paying attention to the cost: door fittings that are too cheap are unlikely to last long. In addition, if the door is used frequently, the fastening may become unusable faster. Therefore, when choosing a product, you should take into account its intensity of use. Where the pen is not used very often, you can choose cheap options. If the handle will have to be repeatedly exposed to workload during the day (for example, for a bathroom door), you should choose a product with high strength ratings.
• Planned renovation of the premises. When creating a new room design, often old products “do not fit” into the new design picture.
• Scuffs on the surfaces of decorative elements. Typically, the first parts to fail are the internal parts, especially the locking parts and locking tabs. But sometimes the inner part serves for a long time without breaking, and the outer surface takes on a worn and shabby appearance. In this case, you should consider replacing it.

Stationary handle

Stationary door handles differ from similar products in their simplicity. They are not connected to the lock mechanism and are secured with self-tapping screws or self-tapping screws. Removing and replacing them is not difficult. You just need to unscrew the fastening elements and release the product.

There is another option. If the screws are not visible, you need to rotate one part of the product to the side while holding the other part in place. This is typical for stationary round mounts. They are usually fixed using a main axis.

Lever handle

The push structure has an internal mechanism that connects it to the locking tongue. As a rule, these are “L”-shaped products. When you press it, the tongue disappears into the doorway and the door opens freely. The deeper the tongue goes into the hole in the doorway, the more pressure you need to apply. Accordingly, a design that does not require deep pressing is more convenient to use. The fastening is done on both sides of the door at once. General procedure for removing a push-type product:

• Remove the main part. There is usually a bolt or screw on the bottom of the handle that needs to be unscrewed.
• It is necessary to remove the decorative trim, which hides the screws securing the main part of the structure. The cover plate is in most cases attached using threads.
• Unscrew the screws and pull the part towards you, holding the fastener on the other side of the door leaf.
• Taking off design on both sides, you can start releasing the lock.

Knob handle

The peculiarity of the Knob design is that a lock is embedded in its center. At the same time, it may outwardly resemble a conventional rotary or push version. This type of product is most prone to frequent breakdowns, so the most pressing question for the owner is how to disassemble a round door handle. Disassembling this design can be more difficult than other types of door hardware.

Before disassembling it, you should look carefully and find where the pin is located. It is usually located on the side of the room and helps secure the handle to the door. You may have to tinker around to find it, as it may be hidden under a decorative trim. A special key with a stop is often immediately included in the kit when sold.

• Using a screwdriver or other object, clamp the pin.
• Remove one handle and unscrew the screws.
• Remove the second handle.
• Unscrew the bolts and release the lock.

Understand The question of how to mount the knob is not difficult. You need to do all the same manipulations in reverse order.

Round handle with rosette

The method of its removal differs in that it is usually necessary to separate the elements manually. The part that is located closer to the door leaf should be held, and the upper part should be rotated. This will remove the top piece from the thread.

The second step is to remove the socket, unscrew the screws and remove the axle. Dismantling should be carried out carefully to avoid damage to decorative elements.

Dismantling and disassembling door hardware will not be difficult if you carefully and thoughtfully familiarize yourself with the features of its internal structure.

The handle is, of course, an important functional element of any door. Modern manufacturers supply the market mainly only with high-quality fittings. However, unfortunately, sometimes you still have to replace door handles with new ones. Some apartment owners prefer to entrust this procedure to hired craftsmen. But since, in principle, the answer to the question of how to disassemble an interior door is simple, if you wish, you can save money and handle this procedure yourself.

In what cases is replacement necessary?

In this article we will look in detail at how to disassemble the door handle of an interior door. Photos of this operation will, of course, also be provided to the reader.

Actually, replacing the interior door handle itself may be necessary in the following cases:

1. In case of breakdown. This is one of the most common reasons for the need for dismantling. The door handle mechanism wears out over time, either due to intensive use or as a result of rough handling of the door leaf. Some parts fail and the fittings stop performing their main functions.
2. If necessary, install a new model. Technology is developing very quickly these days. That’s why door handles of ever more advanced designs periodically appear on the market.
3. Home renovation. This may also make it necessary to remove the door handles. After all, when renovating, the interior of residential premises often changes in the most dramatic way. As a result, the design of old handles can create disharmony in the design.
4. The appearance of abrasions on the handle itself. The decorative coating of the main part of such fittings begins to wear off over time due to intensive use. Worn handles of interior doors, so that they do not spoil the overall impression of the decoration of the premises, of course, should also be replaced with new ones.

What may be required

Before you begin dismantling the door handle, you should, of course, prepare all the necessary tools. To disassemble this element, a home craftsman will need:

• screwdriver;
• an awl, nail or any other sharp and thin metal object.

In fact, at the actual work site, of course, it is necessary to provide good lighting. Some structural elements of door handles are small. With little light, they can simply get lost.

Types of door hardware

We will look at how to disassemble an interior door handle in detail in the article below. First, let's look at what types of such accessories actually exist on the market today. After all, the method of dismantling the handle depends, of course, primarily on the features of its design. Modern doors can be supplied to the market with fittings from this group:

• stationary;
• rotary;
• push.

Also, interior doors are often equipped with special handles, which can also be locked with a key.

Stationary models

The design feature of this fitting is that in most cases it is in no way connected with the latch and lock. The stationary handle is used only for actually closing and opening the door. This type of fittings is attached directly to the canvas, most often with screws.

How to disassemble a stationary interior door handle

To remove fittings of this type from the canvas, a home craftsman will only need a screwdriver. Dismantle the stationary U-shaped handle as follows:

• unscrew the screw on the main part;
• remove the handles.

Such a simple technique can serve as an excellent answer, including to the question of how to disassemble a round rod door handle for an interior door. When removing such fittings, like conventional ones (in the form of a bracket), the screws most often also have to be unscrewed only on one side.

In some cases, the stationary handle can be supplemented with a mechanical latch. This fitting option is dismantled as follows:

• Use a screwdriver to carefully unscrew the mounting screws;
• are removed;
• the rod with the cap is removed from the metal jumper;
• the handle on one side is removed;
• on the other side, the tetrahedral jumper is removed.

How to disassemble the door handle of an interior door: diagram for dismantling rotary fittings

Stationary structures on doors are used very often. But many modern interior models can also be equipped with easy-to-use rotary handles. The fittings of this type consist of the following elements:

• a knob rotating around its axis;
• halyard latch or bolt.

The angle of rotation of the knob of such handles is limited only by the stroke of the latch. The main advantage of this type of fittings is considered to be compactness.

Of course, many home craftsmen would like to know how to disassemble the handle of an interior door and this variety. Dismantling of rotary fittings is carried out according to the following method:

• Decorative overlays are removed from the canvas;
• the sharp end of an awl or nail is inserted into the side technological hole;
• the pin moves away;
• The pen itself with the cap is removed.

At the final stage, the home craftsman needs to pry off the latch and remove the decorative flange.

Push fittings

The handles of this variety are L-shaped. Office interior doors are mainly equipped with push fittings. But sometimes they are supplemented with the canvas of household models (most often plastic). When you press such a handle, the halyard lever begins to move, as a result of which the door opens.

How to disassemble

Dismantling the push handle begins with removing the cover located next to the lever. To remove this part:

• press the rotary lock stopper;
• pull the axle and handle.

For convenience, you should use an awl or nail at this stage. After the overlay is removed, you need to:

• unscrew the screws securing the handle parts;
• remove the tetrahedral rod;
• remove the second cover;
• remove the remaining handle parts.

Knob pens

Fittings of this variety, in fact, belong to the rotary class. However, in the design of such handles, among other things, there is also a locking button.

Removing the handle-knob

Next, let's look at how to disassemble an interior door handle with a latch and lock. To dismantle such accessories, in addition to a screwdriver, the home craftsman will also need a special key with a stop. The latter usually comes complete with the handle itself. The nob is parsed as follows:

• use a screwdriver to pry up and remove the cover;
• press the opened stopper with an awl or nail;
• remove the knob;
• Unscrew two screws from the side of the removed handle;
• remove the loose parts of the structure.

The final step is to unscrew the screws holding the latch. Next you just need to remove the last one from the canvas.

Instead of a conclusion

Thus, we have figured out how to disassemble the door handle of an interior door with a lock, a regular rotary, push-button or stationary one. As you can see, all these types of fittings can be dismantled quite easily. However, the disassembly procedure should, of course, be carried out as carefully as possible. The home handyman needs to be especially careful when using a screwdriver or an awl. If they break loose, these sharp tools can very easily damage the decorative coating of the door leaf itself. And this, in turn, of course, will have an extremely negative impact on the appearance of the entire room as a whole.