Artificial trees can be considered an excellent decorative element for any room. They always remain ever-blooming and decorate the house. They can be used as a gift. You can make decorative trees with your own hands in any variation. However, before starting work, you should decide what type of wood will need to be used as a base.

Making an ever-blooming tree

To carry out the work, you will need to prepare superglue, corrugated paper, PVA glue, and a knitting needle. The master will also need any object that resembles a trunk. It is important to prepare the pot too. Before starting work, stock up on plaster. To make decorative trees with your own hands, you need to take corrugated paper and make several strips out of it. The size of the flowers will depend on the width of these blanks; in this case, this parameter varies from 1 to 2 cm. If corrugated paper is not available, it can be replaced with napkins or tissue paper.

Making flowers

First you need to cut the green squares that will form the basis of the leaves. The squares should have a side equal to 4 centimeters. Next, you can start making flowers; you need to fold the paper one by one, adding glue. You can fold each strip at an angle of 90 degrees, but it is permissible to experiment, since different bending angles of the strip will affect the shape of the flower. A regular stick and ball will do for this. The latter needs to be fixed on a stick using superglue or tape.

Ball assembly

Next, using PVA glue, you can begin to attach the roses to the ball. If you decide to make decorative trees yourself, the master class presented in the article will help you. When all the flowers are secured, you can add leaves, strengthening them in any order. Now you need to “plant” the tree. For this, a pot must be used, which can be replaced with a cup. The entire space must be filled with plaster, which is diluted with water until the mixture becomes thick. Now the structure can be seated in a pot; it is preferable to install everything against the wall so that it is possible to support the structure. The tree must be left in this state until the plaster hardens. The plaster should then be covered with green fiber or painted with acrylic paint. By making decorative trees with your own hands, you can decorate them as you wish. You can use satin ribbons for this.

Making a tree from fabric flowers

This tree is very simple to make, you will need some fabric, a bamboo stick, a pot, buttons and ribbons, and chalk. A needle, as well as thread and scissors, will come in handy. Make sure you have a floral sponge and padding polyester. You will need to cut out circles from the fabric, which are most easily drawn using a mug. Next, the circles are stuffed with padding polyester and sewn together.

Barrel manufacturing and assembly

Now comes the turn of the bamboo stick, which needs to be wrapped with green tape. When you make decorative trees with your own hands, the next step is to insert a floral sponge into the pot and install a stick in it. Next, use glue to fix the moss, and then glue the flower to the stick. If you wish, you can also decorate the pot with ribbon and then add a button.

Making coffee tree

To carry out the work, you need to prepare a ball, PVA glue, threads, superglue, a pot and a stick for the barrel, as well as tape, plaster and coffee beans. First you will need to prepare a foam ball. It needs to be wrapped with threads and the grains attached to the surface of the workpiece; glue should be used. It is initially recommended to wrap the spherical element with threads, the ends of which can be attached with glue. Next, you should designate the place where the barrel will be installed. You need to leave a small circle, the diameter of which is 1 cm, where the threads and grains will be glued. If you decide to make a decorative tree with your own hands, then at the next stage you need to start gluing the grains. For this, it is preferable to use PVA glue, since superglue can corrode foam.

It is preferable to apply glue to small areas, each of which should be covered with grains. In this way, you will need to continue until the entire surface is covered. There is no need to press the elements too hard. It is better to let the structure dry after pasting half the ball, which will take about half an hour, only after that you can continue. After the first layer has been pasted and the composition has dried, you can move on to the second layer. This time you can use superglue, the grains should be turned with the convex side down. It is better to strengthen them in those places where gaps are visible. It is not necessary to coat each element with glue; you can squeeze the composition onto a newspaper, and then dip the grains in it.

Now the entire structure must be left to dry completely. When making a decorative tree with your own hands, at the final stage you need to leave gaps for the trunk, which are then sealed with grains. Next, a pot is prepared; in this case, it is preferable to use one made of glass. In order for the wood to hold up well, you must also use gypsum. You can add some coffee grounds to it when preparing it, so you will achieve a brown color. When the plaster is poured, you need to install the tree in it and lean it against the wall. The tree should remain in this state overnight. You can sprinkle everything on top with hazelnuts. You can decorate the trunk as you wish; satin ribbon is often used for this.

Another option for making wood

Before making decorative trees with your own hands, you need to familiarize yourself with the technology of the work. In this case, you will need polystyrene foam, yarn, wire, green coffee, pliers, masking tape, a pot or other utensils. As in the previous case, the pot will need to be filled with plaster. But first, prepare a foam ball, which you can make yourself, and then wrap it with thick threads. You will need several of these balls; in this example, we will consider an option in which there are six of them.

Next, you can begin making the base; in this case, it is recommended to use not wire, but an electrical aluminum wire, which has 3 cores at the base. The lower part of the tree will consist of three veins, while, rising higher, the trunk will have several branches and individual knots. If you are thinking about how to make a decorative tree with your own hands, then the next step is to bend the wire as your imagination requires. This will allow you to get separate branches. You can strengthen them together using masking tape. Pliers will allow you to cut the wire, but you can remove the braiding as much as you want to insert foam balls. In order for the barrel to be as soft as possible, you need to use masking tape and wrap it around the element. In order to fix it better, you can use glue.

Now you can place the previously obtained balls on the frame. You need to pour plaster into the pot and install the tree in it. Once the plaster has hardened, you can decorate the tree as desired. Now you can stick on the second layer of coffee beans. When making decorative trees for your home with your own hands, you can slightly change the design, using technology that you develop yourself as the basis for the work.

Finally

Trees made using the method described above can be made in different modifications. For example, if you do not use the barrel, but only the balls themselves with grains glued to them, then these elements can be fixed to the surface of the canvas. The latter can be made into a real painting. In order to make a decorative tree on the wall with your own hands, you will need to prepare a sheet of plywood. Afterwards the structure must be framed.

All photos from the article

What can you use to make a decorative tree on the wall? In this article we will get acquainted with several ideas for decorating living rooms using stylized images and relief figures of trees on the walls. In addition, we learn that decor can be made not only beautiful, but also functional. So, let's go.

Design principles

Let's start with a short excursion into theory.

It’s useful to know if you want to use the decor of a room to adjust its visual perception:

• A tall tree silhouette image with a small width will make your ceiling appear taller, but will visually reduce the horizontal size of the wall.
• Wide and spreading decorative weeping trees or an image of a low grove the width of the entire wall will provide the opposite effect: the wall will appear wider and lower.
• The predominance of light colors in the background will make the room as a whole more spacious.
• The opposite is also true: a light pattern on a dark background will make the room appear more compact.

However: dark walls with a light ceiling dramatically increase the apparent height of the room.

Flat images

The simplest scenario is a one-color pattern applied to the wall. You can get it in several ways.

Dye

Even if you are completely deprived of artistic talent, transferring the silhouette of an existing image to the wall will not be a problem.

Here are a couple of the most obvious solutions:

1. Divide the printed picture of a tree into squares of the same size.. Draw the same number of squares on a constant scale across the entire wall. Transfer the outline from the sheet to the wall, filling square by square.
2. Use the simplest projector - a lamp with a reflector - to project a silhouette onto the wall.. Fix the sketch of the silhouette with tape on a vertically installed glass.

How to make the contours of a single-color drawing as clear as possible? It's as easy as pie: use masking tape. First, cover the outside of the image with it and paint over it; then repeat the operation, protecting the dried one with tape.

Outline pictures

Instead of dye, you can use ready-made paper and vinyl applications. They are sold with an adhesive layer already applied; Simply peel off the protective glossy paper and the drawing can be glued to the wall.

Note: rough coatings with low adhesion (including water-based paint and lime) must first be primed with acrylic penetrating primer.
In particularly advanced cases, PVA glue is applied to the back surface of the application.

Relief images

Of course, they look much more convincing than flat ones; however, creating a relief picture with your own hands will be noticeably more difficult. What could serve as material for it?

Textured plaster

This is the name of a plaster composition with the addition of large mineral grains, which, when rubbed, leave deep scratches in it, imitating the natural unevenness of various natural surfaces.

The acrylic mass (a more durable cement composition should not be used indoors) is applied inside the contour transferred to the wall and limited with masking tape with a spatula; texture is imparted to the plaster by parallel or chaotic movements of the trowel. Then the edges are cleaned with a knife.

After forming the relief silhouette, the dried coating can be painted with any water-soluble paints; As an option, you can pre-mix the acrylic mass with the pigment.

A more complex option is to form a full-fledged complex three-dimensional image using a narrow spatula and knife.

It’s not for nothing that they say: “Every man should raise a son, build a house and plant a tree.” But whether he can is anyone's guess. But a representative of the fair sex can. She can even make a tree of happiness herself, with her own hands!

Topiary– direction of landscape design. The history of art has been known since ancient times. Today, topiary is known as a trimmed shrub, an elegantly decorated tree that will serve as a real interior decoration. Many are sure that topiary attracts positive emotions and happiness, and if the tree is decorated with various bills or coins, then it also brings prosperity to the house. This is where the name “tree of happiness” comes from.

As a decorative element, topiary has gained worldwide popularity, and now every housewife dreams of seeing such a tree at home.

To create a topiary, you don’t need to go shopping in search of suitable materials, but use the materials at hand. Crowns can be decorated with paper flowers, ribbons or organza, multi-colored stones and pebbles, beads, sweets, etc., it all depends on your fact.

Interesting fact: Topiary, as an art, originated in ancient times. For the first time, bizarre and geometric shapes began to be given to trees in ancient Egypt and Greece. A famous example from that time, which can still be seen today, is the Hanging Gardens of Babylon.

Feng Shui talisman

Topiary is a kind of talisman that can attract love and happiness, health and good luck. Topiaries sold in stores mainly look like flowering trees with stones. According to Feng Shui, talismans have Qi energy. In addition, the Chinese are convinced that precious and semi-precious stones are endowed with a certain charge, therefore the tree of happiness can improve health, bring good luck or make a wish come true. However, the influence of topiary on a person will only be felt if the tree is located in the right part of the room.

Many are sure that a talisman made by themselves has a huge advantage. Likewise, a tree of happiness, made with one’s own hand, carries energy.

DIY “Tree of Happiness”, manufacturing stages

Topiary (tree of happiness) is decorative in nature. And it will depend only on your imagination how and from what materials you will form it.

Topiary includes three components:

• Crown
• Trunk
• Stand or Pot

Crown

A common crown shape is a ball, but with your imagination, you can choose any: in the form of geometric shapes, hearts, stars, etc. Popular base materials:

• Polyurethane foam. Such a crown can be of any shape and size. The foam is poured into an ordinary bag. After a little time, after complete drying, get rid of the polyethylene and give the crown the shape required for the composition. It is very convenient to work with such a crown.

Tip: When working with polyurethane foam, be sure to use gloves.

• Newspaper. You will need a lot of newspapers. The material must be made into something like a ball of the required diameter and density. You can secure the base with a sock, stocking or other fabric. Additionally, cling film, thread and PVA glue will help form the base.

• Styrofoam. The foam can be given the desired shape using a utility knife. Polystyrene foam, like the polyurethane foam base, is very easy to work with.

• Papier mache. Thanks to this technique, you can create the ideal shape for the crown in the form of a ball. The inflated balloon is covered with layer after layer of pieces of paper. After complete drying, burst the ball with a needle and pull it out of the base. The form is ready.

• Any material. To work on making a tree crown, you can use any material you like: ball, ball, spherical toys, etc.

Tree trunk

To create a tree trunk, you can take branches, a pencil, a stick, wire or another similar element. The blank can be decoratively decorated with colored threads and paper, paints and ribbons, or any other material. To emphasize the structure of the tree, it is desirable that the trunk be longer. For larger purposes, the trunk is attached to the pot and to the crown. You can play up the composition by painting the trunk with different colors.

Tip: To make the tree of happiness look more spreading, it is better to take a real shrub as the basis for the trunk.

Pot base

The main decorative element of the entire composition is the pot. It is he who is able to give the topiary a finished look. Not only a flower pot, but also a self-made pot, decorated with your own hands, can serve as a pot for a tree.

For example, if the talisman is made in the form of a bonsai, it is better to choose a rectangular pot, and if the topiary is a tall, round pot. To ensure stability of the crown and base, the bottom of the pot must be weighted. This can be done with a solution of cement or gypsum, gravel, foam and other materials. Pieces of foam rubber carefully placed on the bottom will help prevent cracks in the pot when pouring the solution. Various pebbles, sand, glass, beads, and moss are suitable to decorate the base of the tree.

Tip: When choosing a pot for a tree, remember that it should be larger than the crown of the tree.

A crown made from several materials that follow the same style looks more interesting and advantageous. But remember that the combination of elements must be in harmony with each other, otherwise the topiary will look complicated and sloppy.

How to assemble and what to decorate with?

When collecting topiary, the first thing you need to do is fill the pot halfway with filler. Next, insert the decorated trunk with the crown into the middle of the pot, firmly securing it to the base of the pot with glue. Afterwards you can start decorating the tree itself. To decorate topiary, it is best to use a special glue gun or PVA glue. The final stage - the pot is completely covered with filler and decorated with various elements.

Decor ideas

The most elegant and fragrant decoration is coffee beans. An interesting option using pebbles, shells, stars and other marine-themed symbols. An original idea for a topiary made from nuts: hazelnuts, walnuts, almonds and others. And the most popular decor today is coins and banknotes.

Tip: Use your imagination, use your imagination, and topiary can become a real decoration for your home or an ideal souvenir!

Popular compositions

When starting to work on topiary, think through your thoughts and the materials you will use. There are many ideas, as well as compositions. Here are some DIY ideas.

Tree of happiness made of corrugated paper

The simplest decoration. For registration you will need:

• Pot
• Colored paper
• spherical crown
• Barrel made of any materials
• Colored beads
• Acrylic paint.

The pot is covered with paint, a thick thread, preferably twine, wrapped around the trunk and secured with glue in the center of the pot. And the last step is attaching the crown to the trunk.

Decor. For an oasis, plastic or cardboard is suitable. The size of the oasis depends on the diameter of the pot. To secure the trunk in the pot, you need to make a small hole in the oasis. Corrugated flowers of various shapes and structures will appear to decorate the tree. Each flower is glued to a spherical base with PVA glue or super glue. The top of the pot can be decorated with a border, and the oasis with beads.

Tip: flowers can be glued with hot glue, or you can use skewers or wire.

Tree of happiness decorated with ribbons

An elegant version of the tree of happiness. For decoration:

• Pencils
• Ribbons
• Potty
• Invisible

Rings are formed from the tape and glued to the base one by one, covering all the voids. After decoration, the crown is put on the trunk and attached to the bottom of the pot. The pot must first be weighted.

Tree of happiness made from coffee beans

For decoration you will need:

• Coffee beans
• Plastic glass
• Brush
• Ball
• 2 rubber bands
• Threads
• Rope
• Wand

The brush must be separated into individual hairs. Lubricate the barrel stick with glue and secure the resulting hairs with rubber bands. We make a hole in the crown ball so that we can later put it on the trunk. The base can be painted coffee color, this will help hide minor defects in the composition. Using glue, glue the ball with coffee beans. It is better to alternate the grains with sinuous lines to give a more elegant look. Small flowers or cinnamon sticks look great with the grains. The finished crown is coated with paint or varnish, but the grains lose their aroma.

For the pot, we use a glass, pre-weighting it with gravel, sand or other material. We glue the finished trunk with the crown to the bottom of the base of the glass. To decorate the cup, a prepared rope is suitable, which is tied around the entire diameter. You can complete the composition with a ladybug or a plastic butterfly, which can be attached to the top of the tree.

Interesting fact: you can give the composition a spectacular look, nobility and relief by using a double coffee layer.

Tree of happiness made of beads

Beaded topiaries deserve special attention. Decorating such a tree can take a lot of effort and time, but it is worth it. Any product made from beads is painstaking work. To decorate a topiary, you can immediately buy a ready-made set of beads, and a jar of coffee or cream is also suitable for a pot.

Now each of you has an idea of ​​what topiary is and how to make it yourself. After all, it’s much more pleasant to make something with your own hands, and if you try, you’ll definitely end up with a chic little thing for decoration in the form of a fancy fantasy ball on a leg!

45 photos of tree of happiness ideas (topiary):